The company LWF Lang GmbH was founded in 1987. With our team of highly qualified employees and constantly on the latest machines installed in the park, we were able to become a competent Partners in many industries develop. The latest CNC machines allow us to manufacture high precision. Our parts range from small parts up to 3 m wide milling and turning parts. Our range of services includes: Machining: turning, milling, grinding, drilling Delivery of turned parts up to a length of 3000 mm and a diameter of 980 mm milled parts up to 2600x1000x1000 mm. Welding: Repair and installation: Welding parts: with certified welders according to EN 287-1 Spare parts: according to sample or drawing Series parts: as desired, also with storage with us Special jigs and fixtures: according to drawing, but without construction Mondays: in pneumatics, hydraulics, electrics Overhauls: used machines The company LWF machines and special industrial equipment is a customer-oriented company. We have imposed the obligation to fulfill by constant, continuous improvement of our quality management system, the future needs, expectations and desires of our customers as part of our material, human and financial resources with the best possible quality. We see ourselves as partners with our customers and are interested in their success. The declared objective of our quality policy is to achieve a comprehensive customer satisfaction through: - Product quality, which reflects the agreements reached full. - Compliance with the agreed delivery times and high delivery reliability

Located near the German border, Witec is a trusted manufacturing partner for OEMs across Europe. We specialize in high-precision metal components and assemblies produced in series of 50 up to 50,000 units. As an engineer or buyer, you need certainty that every part will meet specification, every delivery will arrive as planned, and every process can be trusted. We understand that delays or deviations create risk, not only in production but in customer confidence. To ensure every part performs as intended, Witec applies the Witec Precision Process: a three-step approach that aligns engineering insight with manufacturing precision. How it works: 1) Assess – analyse design and critical tolerances. 2) Validate – define the optimal process, produce and approve the first validated sample before series release. 3) Produce – deliver consistent, verified series under controlled conditions. With in-house grinding, metrology and advanced machining for stainless steel, aluminium, titanium and super alloys, and certifications including ISO 9001, ISO 14001 and ISO 13485, we help you achieve predictable quality and reliable delivery. Ready to discuss your next precision project? Contact our team to explore how Witec can support your manufacturing needs.

The Aigner Albrecht GembH. mainly deals in sheet metal processing and in structural steel construction. Through the in-house laser cutting systems we are able to manufacture large parts / oversize, ie up to 6.5 x2, 5m to cut and further processed. Our main field of activity is much more in building trades for the engineering, aerospace, automotive industry, for example, general flashings, machinery substructures, curing tools for truck chassis

LECHMANN Engineering GmbH stands for perfection in aluminium for decades. We offer everything from a single source: we plan, develop, produce, refine, print, assemble and advise you on all topics related to this fascinating material. We realise customised solutions as well as series of several thousand pieces. We offer a variety of products and solutions perfectly adapted for your requirements.

The company Seelandt & Utecht OHG Plastics Processing was founded on 01.07.1990 by the shareholders Michael Seelandt and Heiko Utecht in Eldena at Ludwig's content. Purpose of the company is the manufacture and sale of plastic products of all kinds and all activities in connection therewith. The production was initially only an injection molding machine with a clamping force of 50 tons. In subsequent years, the machinery could werden.Im gradually expanded in 1993, the production site of Eldena was moved to Schwerin. At the new location, the product range, and the overall conversion could be increased significantly. Furthermore, the machinery has been adapted to the new requirements of its size and its performance and features. The own production program includes tool box and tackle boxes, household items, motorcycle bags, fishing accessories as well as accessories for the garden area. The export share is about18%. A second and more kicking in the foreground area is the production of technical items in the customer order. These include, for example, housing parts for electrical engineering, parts for automotive engineering, plant construction and mechanical engineering as well as parts for various construction trades, or even complete units, such as speakers for the sound of wholesale markets. Production is done on modern day injection molding machines with clamping forces ranging from 60 to 400 t. Plastic parts to 1,100 parts by weight of g can be injected. We offer our customers more and also complete solutions. Due to the close cooperation with partner companies from the region, the process chain from design and engineering, prototype, tool and mold making is feasible to mass production. The company currently has 14 employees employed principally in the three-layer system. The assembly and packaging of the products is carried out in close collaboration with a sheltered workshop in Schwerin. In December 1999, the company moved into a new 2500 square meter production hall and warehouse. Thus, the best conditions for the production of high-quality plastic parts are given to us. Due to an increased storage volume, we can react instantaneously to information on goods of our customers. A working group of the sheltered workshop has been integrated directly into the assembly and manufacturing process from the middle of 2000. The main markets of our products are also of Germany and Scandinavia and Western Europe. To all our customers' requirements to fulfill in terms of quality and adherence to the agreed delivery dates can be, and to ensure the reproducibility of the operational processes, operations and corporate principles and to make testable, we have developed and implemented a quality management system based on DIN EN ISO 9001:2000.

We are your partner for precise sheet metal fabrication, processing a wide range of materials including steel, stainless steel, aluminum, and copper up to 30 mm in thickness. Our services include laser cutting, bending, and welding – all from a single source. With decades of experience, especially in the field of stainless steel, and state-of-the-art technology, we guarantee top quality and reliability. Whether prototypes, small series, or large-scale orders – we execute your projects with precision and on schedule.

Sioro Your partner for precision parts and assemblies Sioro AG, headquartered in Switzerland and with its own production facilities in Germany and Italy, develops tailor-made technical solutions that create real added value, efficiently, precisely and individually tailored to your requirements. Our DNA, passion for precision From the outset, we aim to make technology simple, honest and customer-oriented. With passion, courage and dedication, we have built a company that combines precision and reliability. Our investments in high-performance manufacturing companies in Germany and Italy ensure the highest quality, flexibility and independence along the entire value chain. High-precision machining, turning & milling • Turned parts from Ø 1 mm to Ø 350 mm • Manufacture of individual parts to large series • Modern machinery: CNC lathes, curve-controlled automatic machines, rotary & transfer machines We produce exactly according to customer specifications — whether simple geometries or complex components, always precisely, on time and economically. Milling with the latest CNC technology • Processing dimensions up to 1000 x 800 x 600 mm • Individual pieces, small and large series • Automation solutions with robotic loading and automated clamping processes The focus is on high repeatability and economical production. From the initial drawing to the finished component, we support our customers as a reliable partner. Our promise We combine engineering expertise, modern manufacturing technologies and practical experience to create the best solution for our customers... ... reliable, precise and in partnership.

Our development In 2012, Hahn-Handels GmbH, a well-established supplier that had been on the market since 1979, was purchased by Mr. Helmut Abele. Until then, the company had focused on supplying C-quality components. With his knowledge built up over many years, Mr. Abele developed the company in the following years into a business partner that expanded its product portfolio to include B and A parts. While the parent company had mainly worked with a single supplier, the new Helmut Abele team succeeded in establishing a manufacturing network that now includes more than 10 production companies. The Czech Republic accounts for approximately 65 percent of production. Short distances to the production sites ensure personal relationships, i.e., quick coordination and consultation, insight into and control of production processes, and economically efficient transport routes. In addition, there are partnerships with companies in Hungary, Poland, Croatia, Romania, and Slovakia. Since summer 2024, we have also had our own in-house production facility. This enables us to respond even more flexibly, sustainably, and quickly to individual customer requests—a further step toward efficiency and customer proximity. With a broad portfolio of manufacturing and services, Helmut Abele Vertriebs GmbH supports you in achieving your goals. The proven network includes an optimized cost-performance level and offers delivery of all machined parts required. An additional advantage of the partnership with Helmut Abele Vertriebs GmbH is the option of stocking parts at Helmut Abele for just-in-time delivery according to customer requirements. All throughout Europe.

We are a powerful, medium-sized company, which has proven its flexibility and effectiveness in the market. Our main task consists in the precise drawing and fair manufacturing of items, but also small and medium series production, or to model part. Our machinery with modern CNC lathes and milling machines, allows us inexpensive and above all to produce individually according to the wishes of our customers. CNC - machining Turn of short rods to 65mm diameter Chuck parts up to diameter max. 300mm Shaft machining max. 1000mm length CNC - Milling 1000 x 500 x 500 + 4 Axis Conventional machining Turning diameter up to max. 400mm and Länge1900mm External cylindrical grinding up to diameter 200mm length 650mm Miter Drills We handle a wide variety of materials metals and non-ferrous metals Copper Aluminum Stainless steel Steel

We produce stampings, precision springs, and wire forms for the automotive, electronics, computer hardware and lighting industries, among other sectors. Virtually every material is processed by our modern, highly flexible CNC automated machines, allowing quick machine set-ups. Our in-house hardening oven, grinding shop, and assembly equipment further facilitate the timely processing of semi-finished parts according to our customers demands. Perfect surface treatment of our products is guaranteed by plating firms close to our operations. These factors make a quick reaction to customer demands and short lead times possible.

Your Experts for High Performance Plastics The Ensinger Group is engaged in the development, manufacture and sale of compounds, semi-finished materials, composites, technical parts and profiles made of engineering and high-performance plastics. Further development of proven production techniques, new applications and international expansion have earned this family-owned enterprise a place among the leaders in its field.

Your partner in manufacturing technology Using state-of-the-art and networked CAD systems, our engineers and designers develop efficient and innovative solutions for the diverse requirements of our customers. We produce quality. Are you looking for an individual solution? Our technologies are designed to meet all customer requirements With our diverse range of technologies, we offer you tailor-made solutions that are precisely tailored to your needs. Rely on our expertise and flexibility in the following areas: - Drilling mill work - welding - Spin - Milling - Grooves - Interlocking - deep hole drilling - Assembly - Mobile spindles Our range of services includes the construction of special custom-made products, the processing and production of prototypes, individual pieces and series, and the repair of damaged or worn tools and components. Let's talk about your project: Simply contact us or talk to your contact person directly. Our experienced team is happy to hear from you!

Your partner for innovative solutions in toolmaking and plastics technology From development and design to toolmaking and series production of high-quality injection-molded parts — we offer everything from a single source. For over 30 years, we have been designing and manufacturing injection molding tools weighing up to 40 tons and are proficient in all relevant technologies of modern injection molding technology. Our particular strength lies in producing molds for sophisticated visible and decorative parts with first-class surfaces. For this purpose, we use MuCell, gas pressure and polyurethane processes, among others. We produce foam, floor, multi-component, press and PUR tools for a wide range of applications — whether non-visible parts or high-quality visible parts such as high-gloss or open-pore decorative elements made of wood, carbon or aluminum. As a reliable development partner, we support your product throughout all project phases — from initial idea to series production. In our own technical center, we carry out tests, optimizations and final tests and thus ensure the highest quality.

Gädigk Feinmechanik & Systemtechnik GmbH is a company with over 25 years of experience in the design and manufacture of precision mechanical components and assembly devices. The company offers solutions in the areas of automotive, measurement technology, research and medical technology. The services include the development, production, assembly and control technology of complex systems, including prototype construction and series production. Gaedigk is particularly specialized in tailor-made, precise mechanical components and offers a full service from the idea to the finished product.

We are your system partner for assemblies with components from our plastic injection shop and our stamping shop. We have a great deal of vertical integration at our location in Weinstadt near Stuttgart. Our production is optimally designed for quantities of 1 to approx. 800,000 pieces/year. We are also happy to integrate processing processes and components from our or your partners into the value stream in a process-reliable and economical way. Based on a proven approach, we offer you innovative solutions from a single source.

RUPF INDUSTRIES: Synergien einer starken Gruppe Die RUPF INDUSTRIES GmbH, eine mittelständische, familiengeführte Unternehmensgruppe mit Ursprüngen bis in das Jahr 1859, hat sich als international tätiger Akteur in den Geschäftsfeldern Fahrzeugtechnik, Hydraulik und Maschinenbau etabliert. Mit rund 900 hochqualifizierten Mitarbeitern an 10 Standorten (Deutschland, Osteuropa & Asien) erzielte die Gruppe im Jahr 2024 einen konsolidierten Umsatz von ca. 170 Millionen Euro. Heute ist die RUPF Gruppe stolz auf ihre Partnerschaften mit führenden OEMs und Tier-1-Zulieferern. Die RUPF INDUSTRIES GmbH verdeutlicht mit ihrer Unternehmensstruktur und den spezialisierten Tochtergesellschaften, das durch gezielte Synergien innerhalb einer starken Gruppe innovative und qualitativ hochwertige Lösungen für anspruchsvolle Kunden weltweit realisiert werden können. xing.com rupf-industries.com

As a long time supplier to the aviation and aerospace industries in the area of metal cutting, we can assert ourselves as a reliable partner of major air carriers. Through the use of innovative milling strategies as well as modern manufacturing machines in 5Axis area with associated automation systems, we achieve a high throughput and guarantee our customers consistent high quality. Established as a mechanical workshop at 01.04. 1973, we produced the first, Feierabend operation 'in the center of Stutensee-Blankenloch. Over the years, we expanded our production facilities as well as the machinery to now 20 processing centers located in the industrial area of Stutensee-Blankenloch. Through the use of modern technology we are able in the future to meet our customers to meet. You can find information about the past here