CNC milling and turning: several new-generation machining centers are available. Degree of class complexity and precision determines the client. We are able to produce parts from nearly all materials - aluminum, steel, copper, brass, stainless steel, plastic

We have 40- years experience of investing in modern equipment and training of our associates to ensure we have the foundations to consistently produce quality products. We have a wide range of experience in producing quality products mainly consisting of thermoplastic materials which are used as components for electroindustry, electronics and home appliances. Our production is equipped with the latest technology injection moulding machines and is appropriate for small and large-scale production. Most of our products are made of engineering plastics. We are currently working with 18 injection molding machines (Engel, Krauss-Maffei) with up to 2200 kN clamping force.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008. The activities of each company can be found in the following business areas again Textile • batching • centerwind • traveling cleaner • Transport systems (cheeses, roving bobbins, spinning cans) • suction and vacuum systems • coating and dry locations (use behind Web and knitting machines) • storage systems for bobbins • Palletiersysteme Contract production, such as • Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.) • Milled Parts • complete machine and plant construction according to customer requirements from design to Installation and Service • roller production (up to 8000 mm total length) • Locksmith • Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20) Commercial Vehicles • Production of portal elements • Profile editing • Installation • Coating -Machine Elements • Expanding shafts • Clamping Couplings • chucks and adapters • friction and blade shafts • Shaft handling -Kompressorenbau (shipping) • Start air compressors • pressure vessel • Industrial Compressors • compressed air starter • Air-conditioning • bilge oily water separator • Biological treatment plants Environmental engineering �� Screw mills, up to 120 m³ / h • starscreens • Shovel separators • air classifier Products for the steel industry • Band edge processing facilities • rolling mills ��� conveyor systems A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future. A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

Highest quality, efficiency and reliability - our customers expect when you leave their components finished with us. Thanks to our experience, a strong quality consciousness and modern production technologies, we can fulfill these requirements to the satisfaction of our customers. As a medium-sized company, we supply parts since 2006 for well-known manufacturers from the machine and tool manufacturing and the consumer goods industry. So in our plastic and assembly area, we mainly produce plug inserts and plastic components for the electrical industry, while we finished in the metal-working individual, self-, small-and series parts according to our customers. With our own design department, we are able to bring our experience in the planning phase. Often we are able to present potential for a more efficient implementation of a project open, such as in the development of user-friendly components in the area of feeding and assembly automation. What part of our range of services is always of interest to you - the production of your components is in the best of hands! Metal components for the machine and tool - thoughtful and precise. Machining In modern 3 - to 5-axis milling machines we chipping any kind of metals according to your requirements and specifications. Whether items for special machine or Schmiede-/Gussteile for mass production - we are able to produce your components precisely and economically. Jigs For your parts to be machined design and manufacture mechanical and hydraulic tensioners-cost production for your machines. Our mechanical clamping devices are characterized by ergonomic handling and easily operated. They are particularly suitable for medium-sized series and allow the situation safe positioning of the workpieces. For the machining parts manufacturing the hydraulic tensioner is used. Our devices give use free process with high reliability. Special machine Tailored to your needs! As cost-effective supplement for the manual production, we develop components and special machines for the automated processing of assembly and inserts - tailored to your requirements. Components with brains Plastic standard components for the electrical industry - economical and reliable. In the manufacture of plug bridges we focus primarily on the three most popular types on the market: the euro bridge (2.5 A), the Schukobrücke (16 A) and the contours bridge (10-16 A). In addition, we manufacture equipment boxes and other components for the electrical installation. Our plug inserts are characterized by the use of material-saving components that we have developed specially in view of the steadily rising commodity prices.Our hollow pins Black Pint ® or our cold formed pins provide, for example, a material savings of up to 55%! So we can offer you a high quality, functional, standards-compliant product at an absolutely competitive price. Available information on the designs can be found in this brochure. If you do not find a suitable for your application design, please contact us - we are able to realize even special in flexible quantities. Plug inserts with hollow pins: Contours bridges, Schukobrücken Plug inserts with solid pins: Euro bridges, bridges contours, Schukobrücken, device boxes, special bridges

For over 17 years the company GMTI, Golz Mould & Tools International UG, reliable producer of high-quality molds and dies for metal, plastic and rubber products for the Automotive industry and vehicle - Aluminum and zinc die cast parts such as axles, housing - Plastic parts such as bumpers, valves, headlight covers, manifolds, 2-component parts, etc. Lighting industry and electrical industry - Plastic parts such as sockets, switches and other lighting equipment Air and space industry and military technology - Aluminum, zinc die casting and plastic parts for high-precision requirements Medical - Custom-made of aluminum, zinc die casting and plastic for high-precision Requirements Furniture industry - Aluminum, zinc die casting and plastic parts such as handles, hinges, rollers, buttons, etc. Air + cooling technology - Rubber and silicone parts, seals etc. Machine Tools - Tools according to drawing We manufacture molds and tools for small - and large-scale production, as well as Prototypes The dimensions of the parts amount to 1 mm - 3,000 mm It can be processed part weights up to 20 kg. GMTI is an international company with manufacturing facilities in Eastern Europe (especially Poland) and Asia. Together with our cooperation company, we have a large number of experienced staff, from the designer to the machine operator. Through expert advice, a quality range of precision tools and on-time delivery, fr significant advantages to our customers.

Vinegar technology FRINGS vinegar technology has been a market leader in the production of biological food vinegar for more than a century. About 60 % of the world vinegar production is produced by FRINGS systems. Extensive R&D activities have enabled FRINGS to set new standards in the design and construction of vinegar production plants. Chemical technology Core components and applications for gas-liquid reactions. FRINGS rotor-stator aeration turbines are the core component of our high-performance reactor units for gas/liquid reaction technology used in the chemical industry, for fine chemicals production and the pharmaceutical industry. Yeast technology FRINGS specializes in those areas of special yeast fermentations that require particular attention to plant-specific, sterile or procedural aspects. Immersible aerators FRINGS's range of tried-and-tested immersible aerators (under the license of ABS) for industrial waste water treatment includes the immersible TA and TAK aerators, of which more than 10,000 units have been sold worldwide.

The Lamep Srl company was founded in 2003 by two partners with proven hands-on experience in mechanical engineering, who in that same year purchased a small machine shop. Through the constant technological renewal of its machines and organisation, Lamep can respond practically and flexibly to the needs of its customers operating in various industries, mainly energy, special machinery and systems.

For decades, SISTO has been developping valves and pneumatic actuators for demanding applications of the pharmaceutical, chemical process and building industry with international customers. SISTO Armaturen S.A. is an independent company of the internationally operating KSB Group, a leading manufacturer of pumps and valves worldwide. 100% influence on the quality of our products is very important for SISTO. Therefore, we keep the knowledge of all relevant process steps (turning, milling, lining, coating, curing our membranes, welding, polishing, electropolishing) in-house and continuously develop it further. This competence is not only for our own end products available. We also manufacture quality components for other companies. Our high quality position is ensured by continuous investment in product improvement, simulation methods and innovative manufacturing technology. We obtain additional valuable technological impetus through cooperation with universities. The high qualification of our employees is one of the strengths of SISTO.

The Rampf GmbH was founded in 1967 in the beautiful Rettenbach market in the Lower Allgäu and was modernized constantly over the years. A continuous development in quality and processing possibilities unites our company still with customers from the very beginning, as were new customers from industry and trade to be won. The successful cooperation with our customers is very important to us. Our focus is in the manufacture of complex components up to series parts in the fields of CNC machining, CNC turning and CNC milling. For us there is a modern CNC machinery with lathes and milling machines available and guarantees the highest quality standards.

The Glaeser Precision Turning Shop GmbH is a family-run business. It is our understanding that you as a customer of our company are also considered our partner. We solve your problems in conjunction with you. Short-term decision-making processes and flexible resetting capabilities ensure a fast implementation even of special demands. Necessary alterations we realize in short terms and without any loss of time. Adherence to delivery dates and short periods from placing the order to shipping can be taken for granted. Through the continuous enlargement of our manufacturing capabilities we grow with the challenges and tasks assigned to us by our customers. Both flexibility and reliability serve as the basis of our business policy. Decide in favour of quality! We always aim at your complete satisfaction and contentment.

OCTOPUS ALUMINIUM offers mix of complex mechanical and galvanic processes which add value to aluminium products. ALUMINIUM treatment technology: MECHANICAL SURFACE PROCESS - brushing, polishing, blasting, vibrating, satinised MECHANICAL PROCESS - precise CNC turning, precise CNC milling, construction and sheet metal welding GALVANIC PROCESSES - anodizing, organic colouring and hard-coat POWDER COATING - electrostatic coating in various RAL shades, all material available ALUMINIUM products: - FRONT panels - RACK panels - NAMEPLATES, SIGN PLATES made with technology which provides reliable scratch and solvent resistance - Heatsinks for electronics components and other devices - Aluminium racks and housing R&D and production TITANIUM R&D and production of Titanium racks for anodizing processes. Years of experience and know-how of our technical and production staff is insurance for the best possible support and quality of customers parts. We add value to aluminium.

Politecnica Cetai is an Italian high-quality manufacturer, specialized in PLASTIC ENGINEERING. In our workshop, we have several CNC machines with 3 and 5 axes to realize any kind of plastic components. What is different between other plastic component suppliers and POLITECNICA is how we relate with client. We try to be really fast while offering, and we can also help the client with the choice of the best material to use. Politecnica is waiting for your next RFQ to show how we could work together.

Koch-CableTec GmbH was founded in 2009 as the sole proprietorship of Stefan Koch and was restructured as private limited company in 2011 following strong growth. Stefan Koch is the sole shareholder and managing director. From the outset, our company specialised in the development, design and construction of extremely high-quality manufactured cables, control units, electromechanical modules and control cabinets. If required, we will also support our customers through all stages from development, technical drawing and prototyping to series production. Thanks to our steady growth, not only has the number of employees increased over the years, but our fleet of machinery has also expanded. We therefore have the flexibility to cover cross-sections ranging from 0.08 mm² to 75 mm² and manufacturing lengths from 15 mm to 7000 mm. Our product range extends from single wiring harnesses, vehicle wiring systems, complete vehicle wiring harnesses and control units to single wires and wire sets for a number of sectors.

We are a successful, medium-sized company with a broad Range of services in the production, engineering, jigs and fixtures. At our headquarters in Allersberg, Germany, we offer modern methods metalworking and sophisticated complete solutions - individually according Customer developed, designed, manufactured and assembled.

NL-Maschinenbauelemente GmbH manufactures various components on 3 and 5 axis machining centers as well as turning centers.

Welcome to the innojoin GmbH. We are your partner on issues of laser technology and project management. Tell us about your task - we work for them the best solution for your project. Use our website for a first overview of our services.

Our determination is to offer a product or service that the quality and timeliness of the highest standards in the field of production of complex products with technologies of CNC turning, CNC milling and assembly of hydraulic power units, and production of special machines and devices Fulfills. Our goal is to satisfy customers at home as well as abroad.

We are a privately-owned company founded in 2016. The Chief Operating Officer, Ionut Luca, has many years of experience in the engineering and CNC Machining Field. Our company is pleased to offer a combined 20+ years of machining and engineering experience, which is invaluable in providing precision CNC machining. The mission of our company is to provide a manufacturing facility with the capabilities of performing custom precision machining and production component manufacture work in prototype and production quantities while offering the latest in machining and fabricating techniques. In addition to production capabilities, we also offer CAD Design services as well. We have a proud record of meeting the precision requirements for a significant list of valuable customers. Our quality is monitored through various quality processes including PPM Tracking and continual improvement methods. We would be pleased to quote your machining and fabricating requirements.

Omni3D is the leading European manufacturer of large-format industrial 3D printers. With 10+ years of experience in industrial applications, we offer innovative solutions and comprehensive support for businesses across diverse industries. Our industrial large-format 3D printers unlock new possibilities for production, and tool creation in industries such as Railway, Automotive, Defense, Aerospace, and Maintenance, among many others. Experienced Team: A team of passionate specialists with 10+ years of industry experience and expertise in 3D printing. Award-Winning Technology: Our printers boast award-winning and patented solutions, ensuring high-quality and precise printing. Constant Innovation: We continuously develop and expand our offerings with new 3D printer models and materials. European R&D and Production: Guarantee of high quality and safety standards. We printed Parts with EN45545 Hl3/R1; HL3 R6, HL3/R22