Prototypes, spare parts and small series in metal and plastic; The prototype construction is prepared with special 3D hardware and software (scan, construction, simulation). A diverse technology combination of 3D printing and casting techniques helps to produce sample or functional parts using metal investment casting (aluminum, brass, zinc to steel) or plastic vacuum and injection molding (PU or injection molding materials). In addition, various industries are supplied with special 3D printed parts; Functional parts where 3D material is sufficient; lost models to investment casters; Objects of illustration in medicine; SPECIAL IN-HOUSE PROCEDURES: * 3D-ENGINEERING_SYSTEME: construction, scanning, simulation (loading / FEM, casting simulation) * 3D PRINTING TECHNIQUES (additive manufacturing via SLA, FDM and Voxeljet) for the production of design, concept and (depending on requirements) functional models; * VACUUM CASTING TECHNIQUES for the production of small series in various plastics * FINE CASTING TECHNOLOGIES for aluminum, brass, zinc (cuvette differential pressure method) as well as for tempering and stainless steels (shell investment casting) * RAPID TOOLING techniques for the rapid production of injection molds from both aluminum inserts or from cast resin components; SERVICES * DEVELOPMENT SERVICES such as design, engineering (FEM / simulation), construction, Confirmation of active principles * MODEL PROVISION accompanying development to optimize new technical products (e.g.B. Pumps) or their components (e.g. impeller geometries) * ITERATIVE DELIVERY OF PROTOTYPES in the original material for test and investigation purposes with constant adaptation of geometry and parameters * SMALL SERIES AND FUNCTIONAL PARTS from 3D printing, vacuum casting (plastic) or investment casting (metal) for motorsport, maintenance, one-off production * MODELS FOR FINE FOUNDERS thanks to rapid production using 3D printing or wax casting

We offer: Plastics Processing Product design, development, support and advice from the idea to the finished product. Assistance in material selection Design and manufacture of injection molds Manufacture of plastic injection molded parts up to 300 grams weight Assembly Pre-series (SLA, SLS, vacuum casting) and finishing with external partners We offer beyond that: Refinement of injection molded parts, special surface treatment (painting, printing, embossing, etc.). By external partners Assembly of components (including orbital riveting) to reduce your production depth High-performance tools and motivated, well-trained staff provide a high level of quality.

Magnetic Media Mechanics Ltd. was founded on the 9th of October 2000, as an independent company on the territory of former big factory “Magnetic Media” Co." It is situated near the motorway, in Dragor, municipality of Pazardzhik. The company is 108 km away from Sofia and 35 km away from Plovdiv. MM Mechanics Ltd. is situated on 8 000 square meters all-out area and has its own buildings, machines and equipment. The company is specialized in mechanical processing of aluminum and steel parts, production of varied tools for flooring, all kinds of galvanic coatings and powder coatings. MM Mechanics Ltd. also produces different kinds of assemblies, as well as non-standard machines for varied processing and current repairs. MM Group - Production of tooling – press forms, molding forms , punching tools, tools for forging - Aluminum die casting under pressure – with machines from 200t to 650 t. - Alloying of aluminum and zinc alloys - All Types of machining - Galvanic coatings – bright and chemical, manganese and zinc coating, chromium plating, - Molding of plastic parts - All types of heat treatment, cementation - Powder and liquid spray coating - Manufacturing of joint bolts, tips and rods for cars - Production of tools for floor covering - Assembling line of meetings and products - Milling and turning (CNC machines) - Stamping, Deep drawing, Forging - Grinding, Heat Treatment, Welding

SNG Plastics GmbH, from Westerkappeln consists of a team of experts with 30 years of experience in injection molding. Article in no time To produce in your highest quality at attractive conditions is ours Philosophy. Whether large or small series: We put your order quickly and Precise - from the first draft, through production, to the punctual Delivery. Because we always have one thing in view: your success!

We are specialized to manufacture according to customer drawings parts from plastics such as Hgw 2082 ..., HP ..., PVC, POM, PA, GRP. We work with our experienced staff on the latest machines and can also meet current customer needs.

We are a plastic processing company (injection molding) with 14 machines from 20 to. to 275 tons. Clamping force, injection weight to 450 gr with its own tool.

Röchling Medical Waldachtal AG is a plastics processing, innovative company within the Röchling Group that manufactures sophisticated parts, components, and entire assemblies for a wide range of applications (industrial and medical technology) with a broad portfolio of manufacturing and assembly expertise (injection molding, extrusion, machining, assembly). As a solution provider, Röchling Medical Waldachtal AG offers a wide range of services. From product development, risk management and validation to approval, our specialists offer solutions tailored to the customer's needs at the highest quality level, from the idea to the finished product.

EuropTec has a broad variety of processing technologies in glass and polymer and provides the philosophy of a one-stop-shop. polymer processing, thermoforming and deep drawing of any thermoplastics, from PC, PMMA gs/xt, PET-G, ABS, PVC, PS up to PPSU, Radel for medical applications, technical parts, displays etc., pressure forming for cosmetically surface applications CNC-machining and drilling of high-end and high-temperature thermoplastics like PTFE (Teflon), PVDF, PEEK, POM, PE-UHMW, PA, PPH-HS, PPSU. Lasermarking of Polymers, Pad- and silkprinting of glass and polymers.

For more than 30 years we have been designing and building pumps, filter devices and filter media for the electroplating industry and providing advice on their use. The trust placed in us is based on our quality, our experience, good cooperation with users, hard work and a lot of perseverance. Our team of qualified and experienced employees produce state-of-the-art pump and filter systems. Our range of services guarantees independent advice for the benefit of the operator. With the experience gained in the areas of filter technology and plant construction since 1988, the private company has become a recognized top address for pumps and filter systems in the electroplating sector. Sustainability is not a foreign word for us. We face up to our responsibility in ecological, economic and social issues. The status quo is constantly being questioned. With our sustainable business model, we create values and ensure entrepreneurial success. All from a single source. Advice, development, production, installation, commissioning, instruction, maintenance and customer service are coordinated at our production site and large storage area near Frankfurt am Main. The production, which is monitored with the latest testing technology, ensures the highest quality standards of customers worldwide. Bohncke GmbH is approved by TÜV as a specialist company according to WHG § 19 and is an ISO 9001:2015 certified company. Together with our business partners, with expertise and high-quality products, we optimize the technical processes and master new challenges. We are always ready to meet new processes with innovations; This ensures that we and our customers have a head start - also in the future. Bohncke GmbH in Germany - your partner worldwide in the electroplating industry and more. BOHNCKE GmbH integrated the SIEBEC Group on July 1, 2015. BOHNCKE is one of the market leaders in the field of filtration of electrolytic baths and supplements the SIEBEC product range with its high-quality devices.

We have been developing and producing highly complex tube fittings for automobiles for 30 years. Together with our customers, we manufacture individual product solutions for sunroofs, convertible systems or cooling and injection systems that are innovative, reliable and safe. Precision is our guiding principle. It is the engine that drives our employees. It is embodied in every single component that leaves our factory. Quality is our top priority. It is guaranteed by the use of the latest technologies and constant process control and optimization by our 170 qualified employees.

We see ourselves as all-round service provider in the field of plastics technology. From consulting to prototyping, mold and tooling to manufacturing assembly and dropship we offer our clients comprehensive solutions and services from one source. Our particular strength lies in the quality and performance characteristics of our production. In addition to our top technical equipment we use only the best-prepared materials. Our specialty is the high gentle drying of various plastics. The relevant specialized and trained staff are employed at the place in the company. The motivation of our team is the long-term guarantee that our injection molded parts arrive on time and in the required quality at the customer. Especially in small quantities, flexibility and speed is our strength.

Our drive elements made of plastics are manufactured exclusively by injection, optionally at special rework in machining processes. With our advanced injection molding machines and by ongoing investment in current technology, we are able, our products cost-effective and automated at the highest level to manufacture. The injection molding process allows us to produce both parts with high accuracy as well as mass-produced in a short time. The necessary tools for this are either already available or are prepared by Zipperle itself. In addition, we also manufacture special parts in various geometries and in a variety of chemical-resistant plastics. AKROTEC - a new material made of aliphatic polyketone (PK) This material has high mechanical properties, has very good chemical resistance and toughness Shock loads, as well as a very high abrasion resistance.

Plast Moulding is an eco-responsible experienced partner who offers “turnkey” solutions in mono and bi-material plastic injection and assembly of sub-units. Our multidisciplinary team addresses at every step of the production the environmental concerns of our clients, in line with their specifications. Plast Moulding is located in Besançon, capital of the Franche-Comté area, recognised all over Europe for its specialisation in microtechnology. Our total package is based on a strategy of innovation and proximity, as well as product specialisation that allows a better adaptation to the needs and expectations of our clients. Our strategy is to work hand in hand with the development of parts and sub-units by our clients, by providing them a global offer. Our Development and Industrialization teams bring you their expertise in your projects, as your technical partner.

POWER-CAST Light Metal Solutions GmbH & Co. KG mounted assemblies, according to modern production methods such as PokaYoke, Just in Time, One Piece Flow and the highest priorities for the quality factor, in large and small series. As a modern installation service we offer assembly lines not only for the automotive industry. Our expertise is diverse industries advantageous for lightweight systems, production assembly, and weight optimization modules are an issue for many manufacturers. Outsourcing reduces your production costs: The advantages: - Goal-oriented project process - Additional production capacity for peak periods - Relief of own production with smaller series - Ensure delivery at bottlenecks in production - New ideas in product development and in the assembly concept Our competencies: - Assembly / Installation Services - Logistics - Development, design and project management - Expertise in lightweight aluminum and magnesium die casting - Diecast zinc - Surface coating - Shoring of high-quality interior materials Certified to ISO / TS 16949 and DIN EN ISO 14001.Qualified staff, structured processes and the use of modern technology in production and test methods are the building blocks for the highest standards of quality. As an additional service, we assume, of course, in the short term, assembly parts in transitional phases. As a system supplier, we support your product, even from the beginning, helping you to reduce costs and solve capacity bottlenecks.

The experiences with many different plastic processing's and the equipment for elastomeres enabled a specialisation on alloys. Today we process today the following materials: •all reinforced and non-charged thermoplastics •their copolymers •different types of thermoelastics •all important elastomeres a.e. NBR, SBR, EPDM, FPM (Viton), Silikon and HNBR. We buy standard elastomeres as well as those according to our own recipes. Our range of production: •injection-moulded pieces of thermoplastics •moulded pieces of rubber •O-rings up to 500 mm diameter •Alloys of plastics and rubber

We manufacture from individual parts to complete machines. Above all devices, equipment and small series (bis. about 500 pieces). Competent and with great experience, we work every day creative solutions to clients at home and abroad. We like to go unconventional paths. Not just on principle. From experience we know that often just lead them to the goal. We see complex and unusual tasks as challenges, which are particularly exciting. And on whose solution we are really proud of. Down to the smallest detail. Precision Machined develop, manufacture, we measure and assemble for you machines, devices and components - because they can look very closely. What can we do FOR YOU? Basically EVERYTHING that you need for making your products or even the product itself: Machines, devices, assemblies or just items: After our design or customers, including functional test and acceptance report (mechanics) from small parts to large part Small parts min.3 x 3 x 3 mm and up to 0.3 g Large parts max. 8000 x 2000 x 1000 mm and up to 6000 Kg Even "problem parts" of lot size from 1 to 200 CNC turning and milling parts in 4 - and 5 - axis machining or multi-sided machining in one clamping position. For everyone, including stainless, high strength and hardened steels, aluminum, non-ferrous metals and plastics, including fiberglass-reinforced Basic frames and components made of steel or aluminum welded construction or cast version. fully assembled mechanical structures with high precision (15 microns) for various applications Workpiece-related fixtures with unit weights up to 6000 kg (hydraulic and / or mechanical) for multi-sided machining and multiple voltage according to our own design or customer specifications * 4-WAY JIG * 1-UP JIG * SWING CLAMPS * MANUAL CLAMPING DEVICE Device body (tombstone / rake / tension towers) Teaching and prototypes Mechanical assemblies and components for machine tools and measuring machines manufacturers such carriage, brackets, recordings etc. 3-D machined parts, mold frames and accessories for the tool and mold according to drawing and record Special parts and unique items according to sample or drawing One of our specialties is the Hard Milling and Boring workpieces made of hardened steel or titanium