We are a medium-sized, metal processing company with its own development and production in Germany. The combination of modern working processes and decades of experience, we will continue to try to make your success our innovative edge. What does this mean for them? Professional project planning, Quick decision-making, Short delivery times and unique quality. Why do you need it? Because your technique also is not any, and thus there is no reason to settle for less to be satisfied... Our core competencies CAD design in 3d In general, metal processing Specifically, sheet metal processing Bending / folding sheets up to a thickness of 8mm (CNC gesteuet) Punching / nibbling sheets up to a thickness of 8mm (CNC controlled) Welding of steel, stainless steel, aluminum, cast Glass bead blasting Polishing Priming and painting Maintenance Preparing the materials for o chromating o Galvanizing o Anodizing o Powder coating Special experience Development and construction of frames and components in 19 "Technology Development of radio and television broadcast van Studio Furniture Vehicle interior fittings (special designs) Monitor walls Casing of development through prototyping to

The Otto Bauckhage GmbH + Co. KG is a medium-sized company mainly active in the field of stamping and forming. Our domestic and foreign clients belongs primarily to the automotive and electronics industries, as well as the bolt and nut industry. The company was founded in 1960 by Mr. Otto Bauckhage and still is in its way a traditional family. Up to 31.12.2002 Hans Werner Bauckhage stood before the company as Managing Director. 01/01/2003 Mr. Dietmar Schoettler and Heike Schäfer have occurred as a shareholder in the company and has been appointed as managing directors. The medium-sized company structure with about 35 staff gives our company to produce the necessary flexibility, small quantities and large production runs efficiently and therefore ensures a fast and reliable order processing. Our quality management system complies with the standard of the automotive industry according to ISO TS 16949:2002 and EN ISO 9001:2000 and is certified accordingly.

METAL PARTS MANUFACTURING - TOOL MAKING - CNC MILLING - CNC TURNING - WIRE EDM - DEVICE CONSTRUCTION - ROBOT WELDING

Our mission statement is the lived between management and employees corporate philosophy, which is the basis of our cooperation. Only on this basis we see the opportunity to all of our existence - companies such as employees - in the future to successfully secure and livable. Tamke companies see themselves as convinced integrated parts of our liberal democratic polity and the inextricably linked thoughts of the social market economy. Through our products and our work, we are committed to the related rights and obligations under our responsibility for the conformity between Customer focus, trusting and goal-oriented relationships with our employees and colleagues, Protection of nature and environment and economy. The management and staff undertake this mission statement to live in daily interaction, internal and external conflicts confidence to solve together. Each corporate member is aware that the common goal can be successfully achieved only through mutual respect, assistance, cooperation and commitment of all abilities, knowledge and skills.

brass production

Sheet metal Soest GmbH & Co KG Your competent partner when it comes to sheet metal processing. With us, you get everything from one source: CAD design, laser machining, trimming or manual and automated joining of assemblies. Whether items or in series. Other manufacturing processes, we complement with the help of our network. To include 3D metrology, surface coating, machining and tool and fixture in our program. Customer satisfaction and high quality are our top priority. Our lean operating structure allows for a flexible and responsive manufacturing. Trained staff and advanced production to 2800 m² production area guarantee quality. Our quality management system is certified according to DIN ISO 9001. The fabricated of sheet Soest products are used worldwide in a variety of industries. In the agricultural sector as well as in the furniture or solar industry.

Foundation of our firm is dating into year 1993, when we came to market whit offer of wire program. We expanded our existing program of wire products in the year 1999 to new production from tubes and jokl which are surface whit health free powder color, polyetylen synthetic, chromating. We have started to act under official sign Juraj Zubáň DROTOV after this changes. Housing and office accessories, shopping and industrial goods, facilities (baskets, metal supply, holders, mirrors,....) are creating part of our production program but also accessory attendace, service connected whit production - carriage, knowledge consulting.. Our goal is to improve and make more efficiency flexible production to maximal satisfaction of our client and constantly develop and spread product assortment.

Welcome to the RUNAWERK, your contact for sheet metal processing, front panel, keyboard slides and small equipment manufacturing. Our highly trained employees serve renowned customers in the electronics and engineering industries as well as medical, communications, measurement and control technology. RUNAWERK is also certified and officially approved supplier for leading large companies in the aviation industry. Our portfolio at a glance: - Faceplates - Membrane Switches - Sheet Metal Fabrication - Industrial Coatings - Repro & Screen Printing - Laser & industrial engraving - Rubber plates & stamps - Nameplates & Labels - Development & Design Our key competitive advantage is to say: Leading by quality. We understand the "zero-defect goal." We are convinced that we are always with high quality work processes able to achieve predictable, stable and controllable results. Our manufacturing processes are designed so that we avoid from the outset errors and thus produce lasting reliable products with high quality. For us, quality means "compliance with the requirements of the customers." "Quality is when the customer comes back and not the goods!"

Metal furniture production for Medicine industry, Subcontracting jobs in Sheet metal production from Stainless steel and Zn coated materials, cooperation with building companies in Aluminum facade’s, glazed PVC, Al and Mild steel constructions. Non standart Sheet metal production and Metal furniture – small quantities, special sizes, shapes and colors, everything according to customer request. Starting from engineering and drawing up to ready product. Our main advantage is European quality product made by modern technologies still keeping competitive subcontracting or end customer price level.

We are suppliers for industry and trade. Our manufacturing capabilities are: CNC plasma cutting, sawing, punching, drilling, tapping, turning, welding MIG MAG TIG ... Products: Weldments and Parts according to customer requirements in the areas of steel construction, mechanical engineering and special engineering such as machine frames, machine frames, steel structures, consoles, construction from waste water technology and water treatment etc. We mainly steel and stainless steel. CNC - plasma cutting: * Up to 30mm thickness * Available in steel and stainless steel * Cutting range max. 3000 x 1500 mm * Blanks (also possible cuts by argon-hydrogen) by means of technical gases for optimum cutting quality * Programming in accordance with templates and sketches * Reading drawings in DXF - format Stamping, conventional: * Steel up to 40mm diameter 20mm in thickness * Stainless steel Diameter 24mm to 15mm in thickness Drilling, tapping: * Drilling up to diam.35mm * Tapping up to M20 Turning, conventional: (Clamped inside) * Max workpiece diameter D = 600mm * Maximum workpiece diameter D = 300mm (outside cocked) Saws: * Round up to diameter 240mm * Flat to 300mm width Welding: * MIG / MAG * Component manufacture according to drawing * Maximum part weight: 500Kg

The LPSsrl is operating for more than 34 years on the national and international markets, it is specialized in perforated sheet metals, expanded metals, metallic mesh, embossed metals, filter elements. The products of L.P.S. solve problems of filtration, separation, protection, soundproofing, decoration and design, washing and drying. We are introducing new product lines for furnishings and design. The sheets are obtained by punching cold. The materials used are: mild steel, stainless steels and other special steels, aluminum alloys, brass, copper, zinc, plastic, ptfe teflon, etc.. L.P.S. operating since 1979 in various industrial sectors, has specialized in drilling as well as standard even in dense passages with close, small and very small holes (minimum diameter mm.0,3), perforations drawing upon customer request. We are able to produce little quantities to mass production. In addition to these metallurgical products, due to its structural division, LPS is able to carry out additional processes such as folds, notches, calendering, welding, etc.. At the headquarters of MONZA (Via Buonarroti 177 Italy) customers can find the largest selection of product in stock: perforated plates (iron, stainless steel inox aisi 304 – galvanized steel-aluminum),textured sheets, expanded metal, woven wire mesh, wire mesh, welded wire mesh, etc..

Weinmann GmbH stands for decades of experience in the fields of metalworking, stamping and forming technology. For us, not only the processing of stainless steel and aluminum with the most modern machines belongs to our daily business, we are also the specialist for the forming and processing of nitrile "NBR" coated materials with our tools. We are proud to say that our employees are highly qualified professionals with a passion for their tasks. Thanks to our flexible, committed and highly motivated team, we can react quickly to short-term concerns of our customers. Regular internal and external training courses for our employees guarantee an output

about us In 1987 Eskisehir Teksan Industrial Estate started its activities as a family business and is currently 1500 m 2 'continues to be an area in the activities that our Company, steel metalwork, industrial metal products, including machinery and equipment, Machining, stainless steel and black plate metal, cylindrical bending. For more than 30 years is the company in the industry for press brakes, argon welding, gas arc welding, profile tube bending and cutting, plasma and laser cutting, dispensing systems and stainless food equipment. Our company, which has set itself the goal of growing, has with the daily installation, assembly, Commissioning as well as maintenance and repair work started on state and private companies, with the volume of business increasing day by day. The goal of our company, especially Turkey Eskisehir, which in the past as a mission was believed to offer added value continues to this day without affecting the quality of my policies.

I am a mechanical engineer and live abroad. Here the service is very cheap for you. Just tell me your wishes and let me treat you cheap with perfect quality for you.

Your partner for sheet metal processing - competent, innovative and flexible! As a specialist in our field, we offer a wide range of manufacturing and machining options. Thanks to our state-of-the-art machinery, we are able to manufacture, process and coat components cost-effectively, quickly, on time and with a high quality standard. Whether individual parts, small series, large series, circuit boards, bent or welded structures, up to complete assembly, with the highest standards of quality and performance. Quality assurance goes without saying. The company's own 3D construction processes all common file formats. Of course, we also design in-house to optimize production. Together with our qualified staff, we offer you high-quality products from prototypes to series-ready products. We are looking for personal contact with our customers, scrutinize all wishes and concerns. Expert contacts and friendliness in all areas are part of our corporate philosophy.

The medium-sized company specializes in the professional cutting of ferrous and non-ferrous metals with the help of CNC turning and milling technology. Sheet metal forming and the production and assembly of components as well as modern control and measurement technology are also part of its portfolio. Its core business includes the mass production of small and large batches, the machining of large parts with a length of up to 8 m, jig and fixture construction as well as the welding of aluminum and stainless steel with rail certification. Huss also stands for innovation We’re constantly improving our company and our products. That’s why Huss Maschinenbau invests into research and development in the technological sector. Our work revolves around the processing of wearresistant materials, for example, ceramics and their compounds with metallic components. Huss Maschinenbau is your competent partner when it comes to metal cutting – for a perfect fit.

The company Purkert metal & form GmbH was established in 1955 in Enns - founded in Upper Austria and has developed into an innovative, medium-sized companies. In 2002, the company has a new location in Asten - related Upper Austria. For global customers in the automotive and electronics industries use our potential for innovation, reliability, quality and cost consciousness. A motivated team of employees wearing and developed our core competencies: the decades of know-how of an own tool construction the manufacture of precision metal stamping, punching bending and forming parts and building upon components and assemblies and the production of special cases

Form sheet metal technology in perfection Salzmann form Blechtechnik is your reliable partner in all aspects of sheet metal processing. Expert advice, extreme precision in the machining of sheet metal, steel, aluminum or stainless steel and a sophisticated logistics have made the company one of the leading suppliers.

We are specialists for the "non-specialized" Steel construction and mechanical engineering, which is not in the question. Everything is made of the material steel feasible and our resources equivalent (tools, lifting equipment and hall size) is in safe hands. This web site aims to show the diversity of our work and its applications. Our Viernheimer family business has evolved from humble beginnings to become the partner of big industry. We manufacture individual steel construction such as operating platforms, steel parts for turbine foundations, interior boardings, stator, Exhaustdiffusoren, ND housing, Caddies, pontoon facilities, Austragsilo, pile coverings and much more .. Heinrich Babylon in 1948 founded a water installation company that has been extended two years later to Bauschlosserei. Already in 1955, the local order frame was exceeded, so that first business links were established as a supplier of industrial plants. This line of business has developed so cheap that they changed in April 1976 by the Viernheimer Blauehutstraße in the Zeppelin road in the industrial area four home where the operation still has its headquarters. 1976 The company founder died, and the company was transformed into a GmbH. Babylon's daughter Inge, who incidentally learned the locksmith trade from the ground up and has the journeyman locksmith, and her husband Hans Stumpf introduced today the fortunes of the company. With her son Heinrich Stumpf, in 1985 his master's examination took off, the third generation of the family in the company is now active. • Interior Cladding • Austragsilo • Machine parts rewarding • Exhaustdiffusoren • Metal cladding • pontoons • Steel construction individually • Stair towers • Steel housing • Machine housing • Large pipes • Caddies • Steel pipes • Steel structures • Cladding • Pedestrian bridges • Stator • overflow lines • generator housing • Low pressure housing •