The company ICV GmbH, based in Oberndorf aN was founded in 1990 in Dornhan. Initially the production was focused in the wire-molybdenum spraying of transmission parts for customers from the automotive industry. In 2000 the company moved to larger premises to Oberndorf aN. Meanwhile supplied ICV customers from mechanical engineering, textile industry, paper manufacturing industry, medical technology, electrical engineering and research with high-quality ceramic and metal coatings for various applications. For over 22 years we have been successful with the coating technology and are founding members of the GTS (Association of Thermal Sprayers). Based on years of experience and certifications by TÜV according to DIN EN ISO 9001:2008 and the GTS the quality of our coatings is always assured and reproducible. By working closely with specialist suppliers in the finishing of coatings, we offer you complete part fabrication and repairs includingFinishing at. Through our high level of flexibility very short delivery times are at any time possible, which is especially appreciated during repair coatings from our customers. We finished quickly and cost of the item to mass production. With our method of plasma spraying and high velocity oxy-fuel (HVOF), as well as wire flame spraying and powder flame spraying, we are your reliable partner for metal coatings and ceramic coatings. In thermal spraying, the desired surface materials in the form of wire, rod or powder depending on the application with different methods or melted in a torch and deposited on the surface of the component. The surface is mostly previously roughened by blasting, in order to ensure clamping of the melted particles on the surface. This creates an adherent layer. It> 2 mm are possible depending on the material layer thicknesses.Due to component-specific covers functional surfaces can be partially coated. The strength of adhesion to the edges is limited. Therefore, edges should be> 0.7 mm are rounded with a radius. The surface can be refinished so accurately depending on the sprayed-on material by grinding, turning, lapping, polishing. The coating material may be a single element, an alloy or a composite material. Since no undue thermal stress of the substrate occurs during coating, structural changes of the base material can be avoided. The selection of products and layers is practically unlimited. The coatings are usually made of metals, ceramics, carbides or individually assembled spray materials. The use of thermally sprayed coatings is an advanced and cost-effective method to impart desired properties to a surface. These allow increased performance in the specific application.By the use case fitted surface, often costs can be saved in the base material. According to studies, only 10% of the potential applications of thermal coatings are utilized in Germany.

The H. Steinhart metal goods factory GmbH & Co. KG represents the most modern type of production techniques in cutting metal machining. Founded in 1954 by Henry Steinhart as a factory for craft metal products it developed from 1979 becoming one of the most modern services and specialists in the fields of Sheet & Tube processing / wire bending technology / manufacturing of complete assemblies including surface Annual investment of considerable sums of money in the latest manufacturing technology, a work done in over 20 years of know-how, and a team of highly motivated specialists with the desire for perfection are the basics for a steady increase in the efficiency of H. Steinhart metal goods factory GmbH & Co. KG. The three pillars of our corporate philosophy High quality standard Punctuality Flexibility make our company a reliable and competent partner for a broad customer base.

Edelstahlsägezuschnitte Plasma cutting Water-jet cuts Grind Foiling Stainless steel sheets Dealer Manufacturer Service Plasma Water jet Cold circular saws

Sheet metal working operation with focus laser cutting, waterjet, their processing

Plamingo d.o.o. established own business portfolio, which consists of following activities: - Tool making and plastic molding; - Plating of ABS plastic (chrome, satin, gold,brushed nickel and chrome); - Wholesale and retail of complete equipment for bathrooms.

We are engaged in the metal industry and have specialized in the processing of sheet metal and powder coatings.

SIM Gdynia was founded in 1978 and has been a family company since then. We specialise in machining, in CNC technology and in the production of the highest quality machining components for all branches of industry. Initially, our company is a good example of the fulfillment of “The American Dream” and it shows it is possible in any circumstances. Today, after over 35 years, we are a modern enterprise proud to represent the highest level of technology, service organisation and responsibility.Today SIM Gdynia means: a team of approximately 170 employees, including 25 engineers and a Quality Department of 10, over 50 modern CNC machines and measuring devices including brand new and fully robotised ones of the world leading brands (Makinol, Mori Seiki, Kitamura, Enshu, Okuma, Chiron, Star, Fanuc, Miyano, Doosan, Mitutoyo),machining of alloys (also stainless steel, superduplex) and plastics according to the clients` requirements, samples and drawings, our own production of worm gear, the CAD/CAM/CAE computer aided design and manufacturing system, the export of almost 70% of total production to world class companies and leading corporations in Western Europe, North and South America and Far East, active Quality Policy, ISO 9001:2008, other certificates and prizes.

The family business founded in 1904 in the Rhineland developed and produced for almost 100 years industrial weighing. The original production of mechanical scales has given way to the development of modern electronic weighing system. Consistent market and future-oriented developments, high-tech production and years of experience assure you of performance and quality from RHEWA In view of its design and manufacture and the associated production potential, we are able to manufacture your products in the situation.

Inno-Tec represents a clever combination of precision sheet metal and precision machining process in one company. All standard operations to specialized customization. Inno-Tec works by this combination innovative and cost effective. And of course, revolves around this quality. Quality applied in such a smart way that there is always existence of market outcomes. In short: quality where it belongs.

Industrial service provider with a focus on mechanical and electromechanical components and devices. Thin sheet metal laser cutting, punching, finishing, lathe, mill.

The foundations of Tuna Aluminum were laid in Gebze/Kocalei in 1989. In the journey of more than 30 years, Tuna has always stayed one step ahead of change and has become one of the leading companies in the aluminum sector. In 2006, the new factory building in Cerkezköy/Tekirdag was built on an area of 50,000 m2, equipped with the latest technologies and has an annual production capacity of 27,600 tons. Around 70% of the aluminum profiles produced are exported to other European countries for sectors such as construction, automotive, marine, industrial, electronics, energy and many other sectors. Our Mission: Following global technological and industrial developments, the mission of our aluminum company is to respond to customer needs and expectations while being environmentally friendly Our vision: As an aluminum company, to be a symbol of quality and trust

We are a small flexible craft company in the metal sector. Our expertise lies in rapid production in the area of Mechanical engineering, industrial welding and flexible sheet metal processing. With our internal logistics, we are flexible nationwide.

KST ball-blasting technology GmbH has over 25 years of service in the field of jet technology and currently employs 30 staff with the implementation of various tasks. To implement stand equipment (blower or compressed air blasting machine, continuous or Tumblast machine) for bulk, hanging garments or long material. The service portfolio is broadly diversified in terms of the wide variety of blasting agents and procedures. Deburring Glass bead blasting Steel beams Sandblasting Abrasive Blast Cleaning Shot peening

Robotik Metal d.o.o. is a Croatian metal fabrication company specializing in sheet metal bending, powder coating, and custom metal production. With advanced machinery and skilled expertise, we provide high-quality metal processing services tailored to meet the specific needs of our clients across various industries. Our commitment to precision, durability, and on-time delivery has made us a trusted partner for both small businesses and large industrial clients. We aim to deliver top-tier metal solutions that align with international standards, ensuring our customers receive exceptional results every time.

CNC processing We manufacture your complex components on our machine park, consisting of 11 CNC machining centres. CNC turning CNC milling 3, 4 & 5 axis 3D milling simultaneous milling small part production Program creation with CAD/CAM Solidcam materials Our core competencies in machining are high-precision components made of high-performance plastic, stainless steel and other special materials. High-performance plastics (PEEK, PBI, PI, PAI, and many more) Technical plastics (POM, PC, PF, etc.) Plastics (PVC, PE, ABS, etc.) Aluminum (5083, 7075, 6082, etc.) Steel / stainless steel (1.4305, 1.4301, 1.4112, 1.0037) Superalloy (Inconel, Hastelloy, Waspaloy, etc.) Titanium Alloy (Ti-6AI-4V) Other (ceramic, graphite & tooling materials)

Donlouco is a supplier and manufacturer of customer specific components with extensive experience in the power distribution, hydraulics & electromechanical component field. Headquarters are based in Ireland with customer services, engineering support, scheduling and manufacturing in the Far East. Donlouco has extensive experience in dealing with customer requirements from a quality, engineering standards point of view with a unique ability to be able to communicate these requirements directly to highly trained Donlouco staff in China. Covering all areas of manufacturing, quality control and full logistics control to deliver components exactly to customer expectations time after time and over the longer term.

JHM CONCEPT is specialized in engineering, design, production and installation of special purpose jigs and fixtures. OUR DEPARTMENT: 1 engineering office + 1 machining company A single contact your you with capabilities of two companies: the enginnering office JHM CONCEPT and its machining expert partner SODERTAL. For your needs, we develop, produce, adjust, qualify and deliver specific tools or parts. Our team: 6 engineers and 5 technicians are at your disposal to answer your problems. Our strengths : - Development of specific solutions - Prototyping - Machining - Cutting - Manufacturing Our philosophy: Provide French quality products at the best prices!

We are in the field of machining; turning, swiss turning, multi-axis turning milling, 5-axis milling, internal grinding, external grinding, surface grinding, profile grinding Gear hobbing, gear profile grinding, screw manufacturing, all types of conical straight helical gears, Laser cutting bend welding up to 30mm for sheet metal. All surface cleaning and coating processes, heat treatment works We can. Except that, pipe bending, Available in our profile extrusion capabilities. You can try to choose us for quality production. The superiority of the service provided is always our first indispensable principle.