Precision turned parts in titanium-inox-steel and high-strength aluminum

We are an owner-managed family business, which has been successfully operating in the market for over 40 years. We manufacture prototypes, individual parts or small to medium-sized series for the medical technology, mechanical engineering, electronics, hydraulics, laser technology and aerospace industries. Our employees work to the highest quality standards on state-of-the-art CNC-controlled machining centers.

From sheet metal to the finished product Quick Dependable Holistically. We have been devoted to metal for more than 40 years. We know what it can endure and how we must treat it. We create innovative, tailor-made solutions from metal. Our business relationships are based on partnership and trust. With knowledge and experience, we help you develop your products and optimize them for production so that they meet your needs and fulfill their purpose. This enables us to use the most advanced technology to guarantee you the quality, precision, speed and reliability of product delivery.

We are Slovenian company with more than 25 years experience in CNC turning and milling.

The medium-sized family company Kurt Grützmann Feinmechanik GmbH in Reinfeld is a cross-industry system supplier with the core competencies of turning, milling, eroding and component assembly.

The company IAV turned parts GmbH is a family from the Sauerland region with a production area of 3'000m ². We have ethabliert us internationally to a major manufacturer and currently serve clients in over 30 countries. WHAT WE CAN DO: - Turn (with milling) - Automatic turning (bar) - Long-turning - Shaft - Machining - Thread rolling / thread rolling - Thread whirling - Upsetting - Forging - Burnishing - Stelliting For these technologies, we have eg the following products: Confederation spindles, trapezoidal screws, valve spindles, forged Hammerkofpspindeln, seals with wear-resistant Stellited surface, back seat bolts, threaded rods, nuts, shafts, spacers, Metric thread inch thread, acme screw, Materials we use such as: 1.4006, 1.4021, 1.4305, 1.4404, Monel, Inconel, Hastelloy, SS410 ASTM A479 AD, ASTM A106

We have produced some special parts that have been used on mechanisms on the automobile by CNC Lathes and SWISS-TYPE Automatic Lathes. Some parts of car filter , special rivets , special nuts- screws , some parts of hood lock ,some parts of automobile seats are being produced at our production line.Our monthly capacity is 3 Million parts.

About Abba Technology We believe there is a better way to make products that change the world. We are always here for you, whether it is some tools, products, training, consultancy for desing and manufacturing or just a different perspective! Let’s do something innovative. Together! OUTSTANDING SOLUTIONS & BETTER SUPPORT We have been serving innovators like you since 2018. We know and feel what you want to achieve, because we are just like you. We are the progeny who skips the boring part of the class or the school. We are the ones who always try to go beyond and push boundaries. We are inquisitive, relentless and imaginative as well. But most of all, we are constantly looking for new opportunities and continuous growth. While we are built on a DIY mindset (we know you are too), we recognize that fostering growth and achieving success requires a dedicated, experienced team. This is where we come in.

Your competent partner for CNC turned parts and CNC milled parts Our company was founded more than ten years ago in Korbach. We currently employ a staff of seven, in the 1 - to 2 working shifts. Our expertise lies in the production of precision parts in prototype and pre-and small series. We process high quality materials, work fast and reasonably priced and available for short term through our own delivery service. Through an annual investment of our machinery has been steadily expanded and modernized to meet the high market demands can. On materials we process primarily - Steel, eg St37, St52, C45, 9SMn28PbK - Tool steel, eg 1.2379, 1.2842.1.7225 - High-strength steel, such as titanium - Stainless steel, eg 1.4305, 1.4571 - Non-ferrous metals such as brass (MS58), gunmetal (Rg7) - Aluminum (Round / plates), forB. AlCuMgPb, AlZnMgCu, AIMgSi - Plastics, eg POM, PA6 A constant stock of semi-finished products in various dimensions and profiles allows us to react quickly to meet your needs. Production DFS Weidemann offers complete production, ie the semi-finished or blank out the turnkey component. Add custom work we produce for you: - Prototypes and assemblies - Small and medium series - Complex workpieces with high quality requirements of form and position tolerances Certified partner companies take us for case hardening, induction hardening, plasma nitriding, etc. CNC turning technology For more than ten years, we manufacture both simple and complex parts on modern, technically advanced CNC lathes. For example, we can manufacture aluminum turned parts up to diameter of 350 mm zueinem.In addition, a complete machining of parts 3-42 mm diameter of the rod, to 300 mm in the feed and in length up to 635 mm. Small and medium-sized batches are our particular strengths. CNC milling technology Our extensive range of machinery for a variety of requirements forms the basis for an optimal production process. The CNC machining is up table size 1000 x 500 mm. From custom-built or complex workpieces, always operating with highest precision and accuracy Surface Technology Our services also include the surface treatment of various materials: - Burnishing - Strahlläppen - PVD coating - anodizing - hard anodizing - Chromate - zinc and chromate - Liquid Coating Heat treatment Our workpieces are heat treated for the targeted setting their properties. The performance and service life of a tool is decisively influenced by the heat treatment. As services we offer - Salt bath treatment - Vacuum treatment - Plasma - nitriding - shielding gas treatment

T.E.M.A. is a leading Italian company, specialized in producing precision mechanical parts. Our firm produces small mechanical parts from metal bars, up to 38 mm in diameter, making skilled use of Swiss-type CNC automatic lathes. All production in TEMA is managed and controlled by the most precise and advanced computerized measuring systems. We deploy the most advanced machinery available to enable us to fulfill every requirement, from the simplest to the most complex. Every part produced is released, complete with the measurements taken throughout the whole production process, based on the client’s specifications. Certification of materials, thermal treatments and surface treatments are also included. our firm has obtained the UNI EN ISO 9001: 2008 and UNI EN ISO 13485: 2012 certifications (medical standards). We are also leaders in the production of complex parts, with a broad range of materials, including any steel alloy, stainless steel, titanium, Ergal. Industries which appreciate the excellent quality of TEMA’s production range include: orthopedics, dental, biomedical, automobile, arms, food and drink, oil and gas, jewelry.

We manufacture precision parts in the areas of CNC turning, milling and grinding in small, medium and large series. In the centerless grinding passage we have a high degree of automation through efficient grinding systems. We grind steel, aluminum, brass and hard chrome. By super-finishing we achieve surface finishes down to Ra 0.04 microns and Rz 0.4. Special know-how we have in the processing of stainless chromium-nickel steels. As an A-supplier for renowned equipment manufacturers reliability and delivery reliability is a matter of course.

Ladies and Gentlemens, MECATYP- KS subsidiary of MECATYP SA in Switzerland is active in production of mechanical precision parts as requested. We produce mechanical precision parts with high technology with Swiss Quality and graduate staff in Switzerland. We guarantee quality, quick response to your requirements and shipments in due time. It would be pleasure if you accept our offer of partnership. We are ready to offer you the same offer from our branch in Kosovo with Swiss quality but with better conditions. To satisfy the needs of our customers, we use the following techniques : Machinery in production line: 1. Tornos Deco 10A – form Ø 2 – 10 mm; Quantity from 500 – 1 000 000 2. Tornos Deco 13A – form Ø 2 – 16 mm; Quantity from 500 – 1 000 000 3. Tornos Deco 20A – form Ø 2 – 25 mm; Quantity from 500 – 1 000 000 4. Tornos Deco 26A – form Ø 2 – 32 mm; Quantity from 500 – 1 000 000 5. Brother TC31A - up to 350 x 350 x250; Quantity from 10 – 10 000 Surface treatments Assembly and testing We are specialized in productions and assembly of precision mechanical parts for different fields of industry like: Auto Industry, Micromechanics,food Industry,Medicine, Mining, etc. Also we use a different of raw materials like,Steel, Stainless Steel, Brass,Aluminium, Cooper, Plastic, Titanium, etc. For more information you can visit us in www.mecatypks.com or you can take information in direct phone line.

Specialised in Tube Processing and complete solutions of Precision Steel Tubes, Stainless Tubes and Aluminium Tubes.

Take advantage of Heidelberg Industry's extensive expertise: As a technology partner, we support you across the entire spectrum of industrial production – from engineering to model and prototype construction to series production and service. Our offer grows with your requirements. Whether individual castings or the development of comprehensive electronic components and systems: With our tailor-made service packages, you get exactly the solution you need – on any desired scale. And this always includes the extensive experience and expertise of Heidelberg, the world market leader in printing presses. Let us make your products even better together – with Heidelberg Industry!

We are a newly founded company that specializes in small to medium series in the field of turning and machining. With our cnc lathe from DMG-Mori we can produce workpieces up to a diameter of 410 mm, and a length of 800 mm. Automated series production is possible up to a diameter of 82 mm. Our machine has a Y-axis, which allows us to be very flexible with our driven tools to respond to the needs and requirements of our customers. Our strength lies above all in fulfilling customer wishes quickly and effectively. In a personal conversation we will be happy to inform you about our possibilities.

We offer over 20 years of experience in CNC precision turned parts and Automatendrehtechnik. Foundation of Birk CNC precision turned parts in February 2006 by Dipl.-Ing. Maschinenbau Gunther Birk in Wehingen. In March 2008, the company is founded and appointment of Mr. Siegfried Häsler, metalworking foreman, as CEO. In March 2012, the company moved Birk CNC precision turned parts to new premises after Spaichingen. We produce with high precision machinery quality Made in Baden-Württemberg Products Our long experience in machining guarantees consistent optimum quality and precision in every detail. The company Birk CNC precision turned parts GmbH is certified to DIN ISO 9001:, 2015. Production of CNC turning parts of any kind with cross holes, off-center drilling, milled surfaces and contours, as well as key areas. CNC short turned parts: Machining from bar up to diameter 55 mm Chuck parts up to 250 mm diameter CNC sliding parts: up to diameter 32 mm Numbers: - Small to large batch sizes possible. - Prototyping Automatic Screw Machine Parts: For larger quantities, we have the opportunity on our cam lathes with less complex geometry and tolerance requirements, various rotary components such as: - Bushings, nuts - washers - Spacers - Sleeves and the like economically and inexpensively. Diameter up to 42 mm. Ask for an obligation-free offer for you. We process the following materials: - Hardened steel - stainless steel - Tempered steel - steel - Aluminium - Plastics - Titanium - Brass Other materials on request. We supply so far the following industries: - Medical - Engineering - Electrical Industry - Sensor technology - Aviation

For over 40 years we produce for third parties components for machinery, ranging from the bevel gear used for agricultural machinery, industrial vehicles and cars, to large gears used in harvesters, cutters and harrows. We also manufacture special gears for sump machines and ground gears for cars, all through an advanced production system that allows us to know in real time the progress of the production cycle. We also take care of the realization of gears to customers' drawing, a service that responds to the increasingly demanding requirements out of the market standard. To ensure a high quality product, during all the phase of machining subject the material to a rigid and constant control by means of the product verification techniques defined for individual work areas. A guarantee of quality attested by the importance of established customers over the years, among which include trademarks of international importance. We always paid particular attention to the updating of our operating structure, coming to today to have an integrated apparatus, flexible and extremely competitive as regards the quality of the product and processing times.

With more than decades of experience in manufacturing Diplomat Dental has a solid reputation as a top manufacturer and an established business philosophy where the customer’s satisfaction is viewed as a fundamental principle. We take our commitment very seriously and constantly strive to improve our products, services and overall customer experience. Through a well-established customer-dealer-manufacturer network, we provide our customers with numerous ways of giving us their feedback and comments to make sure they will get the best.

We are pleased that you have noticed us. We are a young, modern and motivated team, which specializes in the manufacture of precision turned parts. High product quality, short response times and adherence to delivery dates are among our strengths. Request a non-binding offer from us and let our quality convince you.