Our enterprise is a private company which continues the 25-year tradition of clutch and brake production in Ostrzeszów, Poland. The company was established in 1993. We employ a highly qualified staff of over a hundred and have our own research and development base. We manufacture a wide range of controllable clutches and brakes used in machines and appliances in various branches of industry. We also cooperate with major German enterprises in this regard. In order to guarantee high quality of our products and meet our customer's needs, we implement the ISO-9001:2000 quality system confirmed by a certificate obtained from DQS. Range of services offered by FUMO–Ostrzeszow: 1. Machining: • Turning: Dmax = 560 mm; Lmax = 900 mm; weight max 100 kg • Milling: Lmax = 1000 mm; Smax = 1000 mm; H max = 1000 mm; weight max 500 kg • Straight teeth chiselling: Dmax = 500 mm; Lmax = 90 mm; module mmax = 5 • Grinding of holes: Dmax = 120 mm; Lmax = 160 mm; weight max 25 kg • Grinding of shafts: Dmax = 150 mm, Lmax = 500 mm; weight max 25 kg • Locksmithery and fitting, including the winding of coils of self-baking wire: coil wire dimensions: D=0,15÷1,40 coil dimensions Dotw 25÷200; L = 10 ÷ 80 mm 2. Heat Treatment: • Hardening of pieces in the electric tunnel furnace with ZAS III protective atmosphere piece flank Lmax = 450 mm lub D max = 450 mm; thickness 0,5 ÷ 6,0 mm; weight max 4 kg • Annealing, hardening, tempering in furnaces without protective atmosphere SQ310 • Induction hardening with UNITERMA–60 system 3. Thermochemical Treatment: • carburizing 4. Chemical Treatment: • phosphating of pieces coat thickness 0,003 ÷ 0,005 mm • blacking 5. Plastic working: • die shearing, stamping, tonnage capacity of the press: 16; 100; 400 tonnes 6. Tool Shop Work: • Manufacture of technical instrumentation • Manufacture of plastic working instrumentation: blanking dies, stamping dies, etc.

We are a small company operating in the metal and plastic industry. The result our company on 1 is July 1999. We are supplier for various companies, manufacturers in the automotive, medical technology, Verpakungsmaschinen and printing machines operate. Our products can be found in various machinery, equipment and prototypes. Our parts are CNC - Milling machines (machining centers) in length and 700 mm in width and 450 mm in height and 450 mm with a high accuracy produced. The materials that we are editing different from plastic and aluminum to the cast iron, steel and Stainless steel. If you or your company and want to belong to our clientele, then give us a call or send us an e-mail. Tel: + 41/052/654 32 39 Fax: + 41/052/654 32 44 E-mail: n_tech@bluewin.ch

Our business: producing high quality CNC turning and milling workpieces in steel, non-ferrous metal, plastics and other auf CNC-Lath-Milling-Center, CNC-Lathes, CNC-machining centre in orderd precision considering form-, orientation and location tolerance gage control with Coordinate Measuring System and Contur Instrument Our characterize: we are DIN EN ISO 9001:2000 certificated by TÜV-Cert and we are an accredited company by the chamber Handwerkskammer Wiesbaden for Master Craftsman in precision mechanics we qualify our employees an ERP-System ensure our work flow can handle datas and detail drawings Our customers: in the branche of hydraulic pneumatic mechanical engineering precision mechanical medical and laborattory technology automotive- and electrinic industry

Producer of swiss screw machine parts with a dia. from 1 to 22 mil, out of brass, steel and stainless. We export 60 % of our production mostly to Germany and Italy.

For all your spare parts and high performance valves

Manufacturing Our employees are provided with the latest means of production. This involves modern CNC-controlled lathes as well as multi-spindle, long-turning and turret automatic lathes. Further processing such as remilling, super-finish turning, drilling, milling, thread cutting, thread rolling, external cylindrical grinding, burnishing, bending, pressing and broaching is done with special machines and rotary transfer machines. Our core capabilities Production of precision turned parts on single and multi-spindle automats, Short turned parts ø 4 - 42mm, Long turned parts ø 2.5 - 32mm, Large and medium series, Complex parts on CNC automatic lathes with one setting. Capabilities for further processing (e.g. rotary transfer machines with automatic feeding, cylindrical surface grinders, broaching machines and presses etc.), Construction of jigs and fixtures, Subassemblies, Prototyping, 100%-verification with opto-electronic measuring machine Manufacturing spectrum Turned parts made of machining steel, stainless steel, Turned parts made of brass, Turned parts made of aluminium, Subassemblies (e.g. turned parts + plastic parts + O-ring seals + floating bushings ), Thermal treatment and surface treatment through co-operation with hardenings and electroplatings

The Company 1981 Company founded Based on the long experience of the company founder Helmut Kraiss in all areas of PTFE processing, the company was founded Kraiss plastics processing as a specialist in cutting machining of PTFE materials. Quick acquired great confidence you look at many clients in various industries. In parallel, the production range was extended to other plastics. Through this development, the first production site in Ingersheim was too small quickly. 1986 Move to Bietigheim-Bissingen With the move to bigger production rooms was the expansion of the machinery with the latest CNC lathes and automatic lathes. During this time, the company developed into a reliable supplier for a broad range of complex turning parts of almost all editable by machining plastics. Expert advice to inquiry and project stage made Kraiss plastics processing a valued partner of well-known companies in various industries. Reference 1996, the manufacturing facilities in the industrial area Lochgau Lack of expansion options at the site Bietigheim that prevented a further expansion of the machinery had caused the company's management, again for suitable production areas. to search. In spring 1996 the present premises were purchased. Our products Turned parts Seals Bellows Cuffs - Back-up rings - O-Rings Membranes Construction parts (Manufacture of turned parts from all common plastics such as PTFE, PFA, POM, PEEK, PPS, PA, PVC, etc.)

With the acquisition of the manufacturing operation of Zeiss Group in 1991, the foundation stone for the Böhm manufacturing technology Suhl GmbH was laid. The company had a solid base in manufacturing technology and an excellent potential qualified employees. Based on this, the company could develop quickly and is today a leader in the areas of equipment and special machinery, electronics, handling systems and manufacturing lines. In 2005, Böhm manufacturing technology Suhl GmbH parent company of Böhm corporation with headquarters in Zella-Mehlis. With its subsidiaries in Turkey and the Slovak Republic, the international market is being processed. With multiple six-figure investment and resistant innovations of Böhm manufacturing technology Suhl GmbH managed the transition from a parts supplier to a developer and producer of complex solutions. The company has almost 200 employees covers all segments of development and design, planning, construction, laboratory testing, manufacturing to on-site commissioning or procurement and logistics of large client companies.It will be offered with the highest standard of quality solutions to complex tasks from a single source. The majority of the Böhm-client operates internationally and 80% belong to their segment of the market leaders. Structurally, the spectrum from large international companies moved from many renowned industry through to indigenous SMEs: for example, the food and packaging industry, semiconductor industry, optical disc industry, medical and rehabilitation technology, automation technology, print media industry, textile industry and defense technology. In 2008, the company undertook several new projects and dared to join them as a system supplier in solar technology.

Information about SCHAIBLE Product programm Dear Sirs, we are proud to present you our varience of products and services the Schaible company can deliver: 1.We produce precision turning parts beginning from ø 1 mm up to ø 65 mm. Therefore we use modern CNC and conventional-turning machines. Your most ambitious parts we can produce on our 9-axis high technology machines like Citizen M20, Traub TNC30, TNC42 or TNC65. 2.We produce gears and pinions (beginning from module 0.2 up to module 3.0; with a maximum diameter of 80 mm) with modern and precision-milling-machines (e.g. Koepfer, Monnier&Zahner, Wahli) as well as worms up to module 2.5. To assure our high quality production we use modern measurement systems. 3.Supplementary production We have a wide selection of machines which enable us to do specific upgrade processes on your parts (e.g.grinding machines, super finishing machines, polishing machines, ...). All of our inspection, measuring and test equipment is network based. We are able to do statistical process control (SPC). We will fulfill all common requirements on quality recording. Our Quality-system is implemented based on DIN EN ISO 9001:2000. We are certificated since Oct.1999. We have customers in nearly all fields of industrial production (e.g. automotive, gear motors, medical, precision engineering, electrical, inspection and measuring industry). Our customers appreciate the technical consulting we can provide to optimize their parts already during the planning and engineering phase. For many years we are system supplier for a lot of German and international automotive suppliers. We work with all kind of materials as brass, steel, ETG, stainless steel, plastics, etc. and are able to do hardening and galvanic processes. To give you an impression of our company a prospect is added to this writing. Of course you are always invited to contact or visit us, so we can show you more about our production and capabilities. We focus on our work to solve your problems. We are sure that we can fulfill your requirements, because our staff is high-qualified and motivated. The cooperation with our customers is very tight and based on experience over dozens of years in our business, so we are able to avoid mistakes and unnecessary costs. We hope this short explication will call your attention. We would be happy to start business with you on partnership.

We are the specialists when it comes to machining large components - Carousel turning - boring. For over 30 years your reliable partner for timely workmanship.

The company REBATECH INDUSTRIAL SOLUTIONS, is a Manufacturer / Producer, founded in 2014, operating in the turning of steel and metals industry. It is also present in the CNC grinding and heat treatment of metals industries. It is based in Izmir, Turkey.

The company Apocer, Lda was founded in Pombal (Portugal) in 1980, as a result of the need for technical solutions for industry. Apocer, Lda started its operations by producing moulds for tile pressing and rubber overmoulding (engine support) for Delphi Portugal and USA . Over time, and following the decline of the construction market, we have expanded our manufacturing range to include the production: *Cold Runners for rubber, *Moulds for rubber parts, *Dies for the extrusion of plastic granules (compounding), *Small and medium sized manufacturing of metal parts.

Development, design and production of complex system solutions in the field margins and fairs. Innovative manufacturer of modular fixtures and modular systems for machining centers, mechanical clamping means of quality control, to the special industrial equipment. CNC manufacturing, vacuum plasma nitriding

More than 40 Years Experienced in Tobacco Industry Jacobi has been established by Lothar Jacobi in 1967. He became favorite partner to the leading German tobacco companies - focussing on maintenance, rebuilding and manufacturing of outstanding solutions. After having merged with the Eastern German tobacco specialist Systemtechnik his son, Frank Jacobi, has taken over the management of the well established manufacturer of customized equipment. Storage, dosage and transportation of tobacco bins, cardboard boxes and cutfiller represent Jacobi's core skills. Their individually designed solutions link Primary and Secondary machinery at high quality standard. As the expert in the industry Jacobi is successfully meeting the exclusive requirements of global acting companies in the tobacco industry.

We manufacture short turned parts ausschließl. made of brass and long turned parts made of steel and brass. Short turning parts D 3-32 mm, length 1-40 mm Long turned parts D 3-32 mm Length 1-100 mm also: Polygon poking, Mehrkantdrehehn, cut thread - strählen, - milling Knurling, slotting Barrel finishing, nickel plating

More than 15 years ago the owner Gabriele Togneri decided to give up his job as Production Manager in a big company to create his own company in Lucca to produce mechanical components. Our name is a promise: we offer to our clients the best Italian excellence in mechanical precision, in order to respond to different requests from all the major industrial sectors and to guarantee high quality and productive standards. Innovation, evolution, quality and upgrading are the four keywords that guided the evolution of Meccanica Precisa up to today, placing the company in the highly competitive market and guaranteeing Italian excellence.

ARGE Automation and Machinery was established in 2007 in BURSA, the capital of Turkish automotive industry. ARGE specialized in the design and manufacturing of special purpose machines, production and assembly lines and robotic systems. ARGE serves mostly for Automotive (%80) and White Goods (%20) industries. ARGE has also started new studies for Defence and Food industries. ARGE incorporates all design, machining, automation and programming processes. ARGE operates in its own facilities which have 2.500 square meters rectangle indoor area. ARGE currently employs 20 highly qualified and experienced staff (8 white collars, 12 blue collars)

On 01 May 1980, the company Peter Wennrich was founded in boiler village. The operation of the Department of metalworking, tooling and machining has been operational since 01.11.2009: second generation. In this context, a limited liability company was established, while the original single company of Peter Wennrich is still existent. You can learn in a detailed company history More about our family. Our extensive range of services includes metalworking, CAD design work, tooling and much more. Customized to your job specification, we use several methods of metalworking a: - Machining, - Bending, - Welding - Or eroding. Our trained staff - cutting and industrial mechanics, welders and tool makers - manufacture and construct high-quality components, construction equipment, spare parts or devices. Not only in the Dresden area, also throughout Germany, Austria and Italy, the siblings Wennrich GmbH can offer all our customers for custom tailored products.

Let us introduce ourselves The company’s headquarter is located in Speyer am Rhein. The origins of VETEC Ventiltechnik GmbH can be traced back to the original founding of the company in 1901. Adding a separate valve section in 1964 was the starting point for product development, whose solutions have been successfully monitored to date by our customers’ manufacturing processes. After renaming the company VETEC Ventiltechnik GmbH in 1985, this know-how continues to guide and develop the company. We have been a subsidiary of the SAMSON group - one of the leading companies for measuring and control technology - since 1988. SAMSON AG in Frankfurt am Main is the group’s parent company. By collaborating with this strong partner, we have a presence in engineering and sales offices all over the world.

Samson Régulation SA is the French subsidiary of the SAMSON group. Its 250 employees celebrated its fiftieth anniversary in December 2012. The site of Vaulx-en-Velin (69) hosts the headquarters of the subsidiary as well as the manufacturing plant. We manufacture part of the standard range SAMSON (valves globes, butterfly valves, regulators self-propelled) for the needs of our French customers. In addition, Samson Régulation develops and manufactures its own range of products and is recognized worldwide within the SAMSON group as a competence center range of food and pharmaceutical products Example of products developed and manufactured in France: - Spherical segment valve type 3310 - High pressure valve type 3252 - Hygienic control valve type 3347 - Aseptic valve type 3249 - Regulator 2371-1 and Diverter 2371-0 Commercial presence in France and French-speaking Africa is ensured by 9 branches: Lille, Cernay, Normandy, Nantes, Rueil, Rhone-Alpes, Bordeaux-Mérignac and Marseille-La Penne and Export. Large stock of complete equipment and spare parts, assembly workshop, setting, commissioning, after-sales service are our guarantees for a complete customer service.