Single part production, presses, forging hammers, repairs of all kinds, on-site processing of large machines

Supplier of metallic and non metallic turned and milled parts as well as preassembled an final assembled assemblies.

The company Herbert Weiss GmbH is a medium-sized family business which has existed since now almost 50 years. Our power is in mass production of turned parts. Our current scope lies in the furniture, electrical, architectural hardware, window and automotive industry. We manufacture exclusively from the coil with rotary machines. This production brings with it that we can not customize any dimension; dimensions, but fit into our range and are for us in the realm of possibility, are thus produced for our customers in high cost-effectiveness. The production takes place in a modern according to the state industrial hall covering an area of over 3,000 m2. This includes, for example, a fully automatic parts and Spänförderer, fully automatic parts-oil removal and chip disposal plant. In our production, 35 skilled workers working in the four-layer system. The current production site in the Ring Road 23 was built in 1995 and expanded to its present size in 1999. In the current production is measured every 30 minutes regularly drawing justice and documented. The documentary takes place by means of the Software and subject to continuous evaluation. For the production and timely delivery, we are always bemht to do everything humanly possible, because we are seeking a long-term business partnership with our customers. We enjoy the trust of many customers, our products worldwide without input control to their customers to provide direct (Ask for our references). We are DIN EN ISO 9001:2008 certified.

Special emphasis of our production forms mass production and production items for the general connection technique, spacer pin of SW4 - for SW13 as well as parts ready to be installed for furniture fittings and electrotechnical devices. Hofsäß use modern high-performance machines with horizontal and vertical operation to produce highest quality parts from coiled wire stock.

The Hessel Metall + Plastic GmbH is a medium-sized company based in Berlin and currently employs 20 people. Our core business includes the complete machining of components and parts. We manufacture small and medium series, but also in pilot production and in the manufacture of individual parts are our strengths. The Hessel Metall + Plastic GmbH is certified according to DIN EN ISO 9001:2000. The production takes place on modern CNC machine tools with which we can produce both series and also items economically and on time. Our company has the following machine types: CNC - drilling and milling centers with up to 5 axes CNC - lathes, CNC - Laser cutting equipment, CNC - Bending machines, 3D - measuring machine, NC - lathes and machines of conventional plastics - and metalworking.

Our range of Zusammenarbit almost a wide range of products and Dinstleistungen to. - Manufacture of components by turning and milling of the item up to series components, - Drilling and deep hole drilling, - Surface grinding, - Welding, - Manufacture of special parts and system components. A complete unwinding Klungkung from the first sketches to series production is possible in a collaboration with the customer. Due to the manufacturing capabilities in-house and through the associated know-how ensures that the Entwiklungsergiebnis can be made to sinnvolen conditions. Whether custom-made or series production, we are your partner for the individuele machining. These allow us to offer a flexible and powerful production. We all component types are processed on modern machines, whether. Turning, milling, drilling or welding But also in special design we are strongly exhibited, for example, rings, shaft bushings role Zylinderrrollen Lubricator chain bucket elevator With qualified staff, we work according to drawings, sketches or samples all common materials used in engineering. Our services at a glance * Turning, milling, drilling (parts with a diameter up to 400 mm and lengths up to 4000mm, Weight 850 KG) * Sawing, cutting * Surface treatment (shaft bushings rings role Zylinderrrollen Lubricator) * Sand blasting, polishing * Manufacturing of complete assemblies

The Linder machining is a manufacturing company with headquarters in Oberlungwitz / Saxony. Since 1993 with the production of finished Machine components and assemblies from all machinable materials employed. Qualified professionals, technical know-how, advanced machinery, Reliability, flexibility and team spirit form the basis of the offer!

We offer our clients a high impact force in the turning and milling part manufacturing. Benefit from Modern art machine technology and innovative manufacturing processes. Good reasons for production at stamue 1 Quality - Made in Germany. We at stamue set to 100% to quality: quality in the education and training of our employees, in the selection of materials and raw materials and in the production and manufacture of our products. 2 Future Germany - we secure jobs. The location of Germany has a future for us. We want to provide a professional future for the coming generations. Therefore, we continuously forming young people in our company to become skilled workers and thus ensure our skilled workers of tomorrow. 3 Quick ways - quick ways - the cheapest way. Due to our location in the heart of the Rhine-Main area, with direct links to the motorway A3 and A5 and a 5-minute distance to the Frankfurt airport, our location is unbeatable.Especially with "just-in-time jobs," and for the lowest transport costs a great advantage. 4 Progress through tradition. Steel and engineering has tradition in our company. Since 1962 we manufacture at stamue everything imaginable from metal. Through our development from classical metalworking shop to a modern company of CNC-controlled processing techniques, we have a wide range of knowledge and manufacturing capabilities. 5 We take our customers seriously. For us, customer satisfaction comes first. We can listen very well and give great care to understand our customers. After all, they are the ones for whom we make a daily effort. 6 At us you can rely on. With us still the spoken word applies. Punctuality is our top priority - we meet with our customer, which will also be held. 7 We work with a lot of idealism and joy. We have high expectations of ourselves and our work.Money is not everything in life. Interest and joy in our daily work is important to us. We appreciate loyal and satisfied customers - people who are instrumental in our success. 8 We are worth our money. Price dumping and unsustainable promise you will not find with us. We always produce cost-conscious and economically viable. Ultimately granted the joy of good product longer than the most favorable price! 9 We think with. Your wishes and ideas we see as a challenge. The best to implement deserve our full attention. We grow with our tasks and are always willing to try new things and to learn everyday. 10 We look forward to you. In order to win you as future customers of stamue Manufacturing Technology GmbH, we lie especially in the stuff. Take us at our word and put us to the test! We look forward to your order.

As a manufacturer of machine tools, production lines and automation technology for metal forming, powder metallurgy and building materials, LASCO partners clients in a spectrum of industries world-wide.

In the "middle" of Europe, we manufacture for 30 years machine parts. Since 2001, we develop and build machines Drahtvorziehmaschinen, straighteners, reels, Warmvorziehmaschinen and Drahtanspitzmaschinen with a focus on the Kaltumformindustrie. In the machine parts manufacturing rolls for the paper industry and hygiene industry, copper parts for the converter and transformer, as well as, among others Lanzenarmierungen waves produced. From the wire coil to the forming machine We are wide awake to the problems of our customers and offer customized solutions from a single part up to the individual machine. A guiding principle of the major industrial potter Josiah Wedgwood (1730-1795) gives us the desired dynamics: "I saw that the field was wide and the soil fertile enough to promise anyone who would take it upon themselves to edit them conscientiously, rich reward."

We are a metal-processing plant in Altach in Vorarlberg. Quality and punctuality are our maxims and guarantee high customer satisfaction. Many years of experience in metal processing are the basis of our know-how. With these advantages, we create customer value - we have the solution for your requirements and needs. Services: Quality Management We as a contract manufacturer in the field of high precision introduce our selves maximum Qualtitätsansprüche. Outbound controls and ongoing monitoring of the in production parts are of course for us. Milling: Our range of services in this area includes a 5-page complete machining up to a length of 8000mm. Our preferences are evident in the production of individual parts and small series, but we can also draw on decades of experience in the production of prototypes. Rotate: We offer 5-side complete machining of turned and milled parts up to Ø700 * 1500mm with swivel milling head. In the production of turned parts, we specialize in small and micro-series. Other services Grind Surface grinding: 1500 * 500mm Cylindrical grinding: ø200 * 1000mm Honing ø10 to ø200 Welding MAG welding, all welding jobs are done by certified and qualified welders - machining of large parts CAD / CAM programming is self-evident - we are happy to offer a production-optimized support for construction The polishing of plastic flow channels is also one of our services. Large part machining: Due to our excellent technical capabilities, we are able to mill large parts up to 8000mm. Moreover, it is possible for us to edit large parts of 5 pages in one setting. We act as a complete supplier, ie we assume from welding to machining all work - an optimized manufacturing process and individually tailored solutions are guaranteed.It is possible to respond to customer-specific requirements, required curing or annealing process, even for large parts are outsourced.

The Machine Shop Rieger has been a family of brothers Ingo and Hans-Joachim Rieger for more than 10 years. The two directors bring their many years of experience in manufacturing valves, mechanical and high-pressure equipment with an unwavering commitment. Your further qualification for master craftsmen and mechanical engineer, as well as the continuous training in the field of quality assurance rounds out her profile. Translation by Google Translate

WAFIOS is laying on top of the wire and tube processing technology. Looking at the industrial wire processing, we are one of the pioneers and constantly improving our developments. Our clients benefit from a unique range of over 250 types of machines provide for the processing of wire and pipe is always the right solution. With our modern machinery (over 100 machines), we have specialized in the production of the responsive production of individual parts and small series. We have mastered not only the Fetigungsprozesse from raw material receipt to delivery of quality tested workpieces, components and machinery, special you are a competent partner in the execution of orders from the first contact. Quality, punctuality, precision, large power spectrum and everything is always in order of customer satisfaction. Challenge us!

c.tec is a young and dynamic family business based in Oberboihingen (near Stuttgart, Esslingen, Göppingen, Reutlingen) in Baden-Würrtemberg. We are happy to manufacture your subcontracts in the field of turning and milling. We manufacture for you small, medium and larger quantities. We process steels, stainless steels, aluminum, other non-ferrous metals as well as most plastics. We can produce in the milling area 3-, 4-, and 5-axis. It is turned on out on stable indexing machines from both the pole and singles in Ø5mm - 250mm. I look forward to your challenge to us. Best regards Anne Czerwenka

COMPANY PROFILE HELLMERICH is the market-leading specialist in multi-spindle heads, precision components and precision parts for the machine tool sector. International and highly reputable machinery companies in the volume industry have been drawing on HELLMERICH’s skills for decades. HELLMERICH’s core competencies, engineering, design and the production of high-quality multi-spindle heads, are the result of 30 years of experience. Durability, reliability, maintainability and environmental compatibility are constantly enhanced in the process to ensure the greatest benefits for customers. The high level of in-house production results in projects being implemented promptly and on an individual basis. Since it was set up in 1979, HELLMERICH has continually met the increasing requirements of its customers with comprehensive quality management.

We are a manufacturer of pneumatic cylinders and adjust our production for the manufacturing of customized Beuteilen available. turning: to ø300 and length of 1,000 mm milling: X: 1,000 mm; Y: 500mm; Z: 350mm (In the range of L / B / H of 120/90/90 we can with our automation system large series abwicklen) Besides aluminum, we also process stainless steel, steel, brass, bronze and plastics.

Manufacture of turning-milling and grinding parts according to customer specifications. -Präzisionsdrehen -4 axis and 5 axis milling Outer round / outer round and inner loops. -Langdrehen -Wellenfertigung - 3D industrial print with carbon / kevlar and fiberglass

We, Median Zerspanungstechnik GmbH, see ourselves as a competent and innovative partner towards the client, who, in addition to the construction itself, also delivers the finished and tested product. Thanks to our own high-precision 5-axis simultaneous milling center, we can implement developed solutions within a very short time. Due to this highest possible proximity to production, we are always right on the pulse of the product and always have an overview of the progress of the project. We always endeavor to cover all wishes and requirements that the customer places on us. That is why we also use the latest technologies. In addition, for projects that overlap with other areas of engineering services, we use the opportunity to draw on a pool of freelance engineers. This means that we can always ensure that they receive competent advice and that the product you need meets or exceeds your requirements and expectations. With this state-of-the-art positioning of our company in competition, we combine competence, innovation, quality and proximity to production under one roof. This is highly valued by our customers - for over 15 years.

For over 40 years, the long-Josef Bauer GmbH manufacturer of single parts, small series, special purpose machines, tools and equipment. On more than 1,300 m² of production area and our modern and extensive machinery we can realize almost all projects from the fine mechanics, tool and machine for you. The following work we carry out for you: - CNC milling and 5-axis (1.270 x 660 mm) - CNC turning (Ø 220 x 850 mm) - EDM and wire EDM (550 x 350 mm) - Grinding (1,000 x 600 mm) - Special machinery - Tool and mold making - Fixture - Plastic injection molding - Stamping - Installation works The following services we can also do for you: - Hardening / nitriding / Glow etc. - Anodising / Hard coating - Powder coating / painting - Laser cutting - Welding - Electroplating - Etc.