Since 1989 RMM manufactures reliable and fair products for almost all industries. The company has grown up in the aerospace industry, subsegments of the automotive industry, optics industry and general mechanical engineering are currently contributing to the success of the company. We process almost all materials right down to fiber composites. Thanks to our regulated QA, each of our customers is guaranteed process reliability with the help of state-of-the-art and precise measuring equipment. The samples according to PPAP and EASA are known to us and are lived in everyday life.

DOMURAT was established on January 8. 2010.by Mariusz Domurat. The company's main goal was to manufacture acid-resistant steel equipment for the food, dairy, and pharmaceutical industries. From the very beginning, our most important goal has been complete customer satisfaction. The result of our activities is high-quality products, as well as a wide range and competitive prices. We believe that the accurate, conscientious, and smooth implementation of our previous projects will contribute to our selection as a partner for your projects. We want your expectations to be fully met, which is why we are open to all forms of cooperation. Our products guarantee the highest quality, as confirmed by the following certificates: PN-EN 1090-1+A1:2012 PN-EN ISO 3834-2:2007 WPQR EN ISO 15614-1:2017 level 2 PED 2014/68/UE The main scope of activity of Domurat Sp. z o.o. is: • TIG welding • Milk reception stations and pasteurization lines • CIP stations • Fermented beverage production lines • Cottage cheese and cheese production lines • Assembly and welding of stainless steel structures (mainly for high-standard technological processes in the pharmaceutical industry) • assembly and welding of acid-resistant steel pipe installations • orbital welding • homogenizing tanks—installations for powder production (pharmaceuticals) • manufacture of austenitic steel tanks—mixers, melters, storage tanks, etc. • assembly and welding of steam and condensate pipelines • installation of systems and equipment for the production of biofuels • systems for the production of chemicals • installation and welding of steam and condensate pipelines with distributors • systems for the production of cosmetics • installation of water treatment plants • biotechnology installations • installation of pumps, tanks, equipment, • installation of bottling lines • modernization and repair of tanks • laser cutting of elements • bending service • machining services, • design and implementation of industrial automation We prefer various forms of cooperation, ranging from independent valuation and execution of work using our own or entrusted materials. At the same time, we offer the hiring of qualified employees and the provision of employee outsourcing services and employee leasing to perform the above-mentioned work.

as Kayabaşı Makine, we operates in our 600 m² facility, producing with CNC lathes and CNC vertical machining centers. We provide subcontract machining services, offering spare parts production to international standards. By prioritizing customer satisfaction above all else, We conduct our production in our quality control laboratory to the highest standards for both national and international brands. We'd be pleased to hear from you to talk about our customized solutions and quality standards, and to explore collaboration opportunities. Please feel free to contact us.

For over 35 years, the Hagen-based company Servo-Dental has been developing and manufacturing world-class dental and dental products. The range of services has been supplemented for more than a decade by the sale of high-quality consumables. Both nationally and internationally, Servo-Dental is known for its flexibility, which also includes individual technical solutions, the highest product quality and excellent technical advice. The maintenance and further development of the Servo-Dental product range will continue to be based on a quality management system that is practiced and permanently adapted to the needs of the users and the legal requirements. In addition to the finest materials, modern equipment such as CAD systems for 2D and 3D simulations as well as CNC-controlled milling and lathes guarantee the best conditions for the highest standards in development and production.

Präzisionsmechanik für Einzelkomponenten: SISTRO entwickelt, produziert und fertigt auftragsbezogen nach ihren Wünschen und Vorstellungen. Für unser engagiertes Team sind gerade komplexe Aufgaben und scheinbar unlösbare Problemstellungen eine besondere Herausforderung. Wir begleiten Sie von der Entwicklung bis zum ersten Prototypen, bedienen das Kleinseriengeschäft und unterstützen Sie bei der ständigen Optimierung Ihrer Produkte. Innovative SystemeVon der Baugruppe zum Systemlieferanten: SISTRO stellt nicht nur Einzelteile zu Baugruppen zusammen. Auch die Entwicklung ausgereifter Komplettsysteme ist Teil unseres Portfolios. Dabei gilt es Techniken der Feinmechanik, Elektrik und Montage perfekt miteinander zu verbinden. Unser Engineering umfasst sämtliche Arbeitsprozesse - von der Entwicklung und Konstruktion über den Prototypenbau bis hin zur Serienüberleitung und Kostenreduktion.

Progress Engineering and Progress Sp. z o.o. is a reputable company existing on the market for over 25 years. We have 11400m2 production space. We specialize in the automotive industry, with extensive experience and an advanced quality system. We have PN-EN ISO 3834 certificates and use quality tools such as PPAP, ISHIKAWA diagram, 8D, Pareto Lorenza, FMEA, IMDS database. We offer documentation for the approval of the production process at VDA level 2. Our PN-EN 1090 EXC-2 qualifications include the execution of welded structures. Our machine facilities include robotic welding stations, horizontal and vertical machining centers, turning machining centers, bending machines, press brakes, 2.5D, 3D a laser and powder paint shop. We cooperate with hot-dip galvanizing and galvanizing with DASt 022 certificates, which allows us to provide comprehensive service from design to finished product. Our company is ready for challenges not only in the automotive industry Our machines: 4x CNC (SAJO,MAS,OKUMA) 7x Milling Centers (MAS) 5x Turning Centers (MAS) 2x Laser Fiber 2D 1x Laser LT Combo 2.5D 2x Press Brakes 3x Hydraulic Press 10x Robots Welding (Panasonic) 1x Plastic Plotter Kimla and many more

We produce high-precision turned parts from Ø 3 to Ø 40 mm from brass, steel and stainless steel. Parts can be delivered with heat and electroplating treatments. Medium and high volume.

The production programme of the company is oriented towards cutting machining of metals. Our products are used: - in the car industry (welded assemblies and sub-assemblies), - food industry (parts of packing machines and lines), - construction industry, - precision engineering (production of base plates and components for moulds and tools) All our business relations are built on a long-term basis and on: - quality of production - flexibility - interesting prices - fulfilment of delivery terms - highly skilled workers - one-piece or series production using NC and CNC machines - Our company looks forward to your kind visit and to a mutually beneficial cooperation.

A synonym for manufacturing custom-made plastics for industrial use By using specific modern technologies for almost 40 years, we built synergies with our clients, and at the same time we gain important experience. Therefore, we put into effect the obtained consent with the necessary sensitivity and concentrated creativity. This way, we remain your competent partner, and we will advice you competently and objectively. We work on thermoplastic materials out of which we manufature individual, complex or simple pieces of plastics for industrial use, from special orders to mass production. In our workshop, the following production processes are executed with modern machines and a lot of know-how: two- and three-dimensional distorsion without cutting (removing edges and bending), gluing, welding, printing and hot printing, As well as plastic-cutting producing processes like sawing,CNC-milling with up to 5 axes, CNC-turning with up to 6 axes and NC-polish-milling We work on thermoplastic materials like: - PM MA- PA- PI - POM - POM-C - PC - PTFE - PVDF - PCTFE - PETP - PAI- PEEK - PES - PVC hard - PP - PE - PPO

Our plant in Staig-Steinberg was built in 1995 and covers a total area of 2500 square meters Manufacturing and administration are located on the site Our production hall is a production facility, warehouse and delivery center in one and is directly connected to the administration building. The modern equipment of the production hall, short distances and efficient warehousing are partly responsible for the short processing times at Alraun Maschinenbau

CNC milling, turning, cutting, bending, rounding, punching, sawing, welding, drilling, cutting ... no problem Stainless steel, aluminum, plastics, .... we process everything We have all the machines for metal and sheet metal working. You can get everything from us, from small stainless steel sheet cuts to complete machines including construction.

As we grow and expand healthy, we are constantly looking for new projects. We procure qualified raw materials, which we process for our customer from automotive with CNC technology in our modern machinery. We punch (punching machines, manual presses), saws (steel and aluminum), by the way we can also offer blasting (also precise blasting), sealing and coating of parts. CNC up to fi 65mm Punching up to 100T We have been certified with IATF 16949 and ISO 14001.

CNC machining centers with technology and automated injections

FERMAKS Industrial Robotic Automation and Machinery Industry Trade Limited Company is excited to share over 20 years of knowledge and experience with you, our valued customers. Since its founding, our company has an expert team specializing in conveyor and handling systems and project manufacturing. Our company offers industrial robotic automation systems, conveyor and handling systems, customer-specific machinery manufacturing, service, and spare parts manufacturing. Despite being a medium-sized enterprise, the importance it places on quality and its determination to overcome challenges has quickly earned it a reputation in the industrial robotic automation systems and machinery industry, and it has never abandoned these principles. The company's unwavering principles have always been quality, service, on-time delivery, and competitive pricing. Operating on the principle that honesty and quality are the guarantee of success and continuity in production, FERMAKS thanks you for your close interest and support. We look forward to serving you today and in the future.

Severin Heusch founded the company in 1850. His invention — the first mechanical clipper — revolutionized the technology used in textile processing at that time. This innovation is the cornerstone of HEUSCH's success story. HEUSCH knives are synonymous with top quality. Quality that still defines standards today.

L.M. Stampi Srl is a leading company specializing in the design and manufacturing of molds for plastic injection molding and die-casting of aluminum and zinc alloys (Zamak). With over 40 years of industry expertise, we are the ideal partner for businesses seeking high-precision and premium-quality solutions. Leveraging cutting-edge technology and exceptional flexibility, we deliver tailor-made solutions designed to meet the demands of even the most challenging projects. Mission & Vision > Our mission is to provide tailored solutions with maximum precision and reliability, leveraging advanced technologies and a deeply collaborative approach. > We strive to be a trusted reference for companies seeking innovation, efficiency, and quality, supporting our partners in achieving their goals. Our Goals: - Long-Term Partnerships: we aim to build lasting relationships with clients who require a supplier capable of growing alongside them and adapting to their evolving production needs. - Advanced Technologies: we continuously invest in new technological solutions to offer high-precision molds and support even the most complex production cycles. - Operational Sustainability: we implement sustainable manufacturing processes to reduce environmental impact and enhance energy efficiency. L.M. Stampi Srl offers a comprehensive range of services: Mold Design | Manufacturing | Maintenance | Repair Injection Molding Plastics | Zamak | Aluminum Finished Products Customization | Packaging | Quality Control & Testing

We ensure local product support at technical and commercial levels for a group of part suppliers in Asia, Europe and the USA.We provide the following components to companies in Europe: - Castings in grey iron, nodular iron, steel, rough & finish-machined - Diecastings in aluminium and zinc alloys - Permanent mould (gravity) castings - Forgings - Stampings We can take care of all of the details involved in getting the components made for you and shipped to a location of your choice. To start, we require a part drawing, an indication of quanties needed and point of delivery. You will receive a quotation rapidly.

Presentation of the company We are a company with a long tradition, which produces diamond (PKD) tools, hard tools, various purpose drills, cutters, knives and dedicated holders for various standard and non-standard tiles. We also produce various tools made of CBN material, which are used for turning and milling very hard materials. Company vision With precision, precision, speed and knowledge, we overcome the set goals, which are expansion, new collaborations and, above all, satisfaction of both old and new customers.

Our company carries out precise and serial processing of cast, forged aluminum and steel parts in accordance with the technical specifications required by the customer. Cast, forged aluminum and steel raw materials are obtained from our reliable domestic or, if necessary, foreign suppliers, with whom we have worked for years, in accordance with the technical specifications provided by our customers. The processing takes place in our company and the products are then delivered to our customers in the packaging required by the customer.