The company Herbert Paul manufactures special machines, devices, mechanical devices and precision parts designed specifically for your requirements. So far we have mainly special machines, devices and precision parts for the following areas: Motor-vehicle technology Aeronautical engineering Automation Technology Handling technology Medical uvw made.

Manufacturer of Radio Frequency and Ultrasonic- Generators and equipment like Sonotrodes,Boosters and Transducers.Metall sheet deportment for forming,cutting and welding especially stainless steel and Aluminium for small sereis. Only punching and cutting without Laser.

The floor GmbH is a medium-sized company with over 50 years of tradition. It was founded in 1953 by master craftsman William Stehle, whose son Helmut floor has continued it. Meanwhile, Karl-Heinz trick (on the left) joined the company and took over the management. Marco Stehle (right), the grandson of the founder, took over the quality management. They are together since 2002, the company, which has developed very well in recent years, shareholders. So good that they decided in 2006 to relocate the emerging operation of Haslach to the nearby fishing creek. At the new location, the company has moved into a modern corporate building that provides enough space for upcoming enhancements reserves. Here is a further extension is created with pure production area, so that a production area of over 2000 square meters is available. We are appreciated as a reliable A-suppliers in the automotive industry. As to ISO TS 16949:2002 certified company, we meet the highest standards in quality management.

Since 1952 WSK "PZL- Kalisz" S.A. has been representing Polish aircraft industry and manufacturing aircraft piston ASz-62IR and AI- 14R engines. They are designed to power the following airplanes: An-2 and M-18 “Dromader" (ASz-62IR) and respectively PZL-101 “Gawron” and PZL-104 “Wilga” (AI-14R). These engine types have been worldwide recognized for their quality and awarded numerous quality certificates issued in the USA, Canada, Brazil, People’s Republic of China. They have been produced in thousands and have proved failure free thus clearly evidencing their highest reliability and performance quality. WSK “PZL-Kalisz” S.A. also overhauls and performs repairs of ASz-62IR and AI-14R engines. In addition, the Company manufactures and repairs assemblies and parts of TWD-10B engine for An-28 aircraft. WSK “PZL-Kalisz” is a joint-stock company (own capital is 85 mln PLN and paid-up capital is 45,86 mln PLN) operating on the basis of the Commercial Company Code. Principal shareholders of the Company are as follows: - Industrial Development Agency 75,45% - Company employees 11,59% - SEMA Sp z o.o. 6,25% - the City of Kalisz 1.35% - Energy Plant "Energa S.A." 1,20% - Other shareholders 4,16% WSK “PZL-Kalisz” is a capital group composed of the mother company and its 2 fully-controlled subsidiaries: - ZOT “NARZĘDZIOWNIA WSK” Ltd. - PPUH „MECHANIK” Ltd. WSK „PZL-Kalisz” S.A. is the company of the essential importance for the Polish economy and is considered as part of the Polish Defence Industry Potential. As a result of the Company's restructuring process WSK "PZL- Kalisz" S.A. has extended its business into wide range of manufacturing programs and servicing activities including production of high pressure engine parts, oil pumps, gears, aircraft screw gears, turbochargers, push rods, pump housings and first of all crankshafts for high pressure engines. All these components require high precision machining in performing special requirements of its customers. WSK "PZL-Kalisz" S.A. maintains business relationship with well-renowed companies such as: General Electric Transportation Systems, Allison Transmission, Turbomeca, Sulzer Textil Switzerland, Pratt & Whitney Kalisz, and many others. Part of the Company production is designated for military aviation. The Company aim and priority is focused on meeting the Customer’s requirements that can be with WSK "PZL-Kalisz" capacities. WSK “PZL-Kalisz” S.A. acquired modern machinery operated by highly qualified and experienced technical staff. The Company continuously seeks new Customers and Suppliers especially in the manufacturing of precise and aviation components requiring high precision processing. Interested partners are always welcome. In 1999 the Company was awarded ISO 9001-2000 Certificate. In 2000 the Company was granted PART-145 Certificate. The following year – 2001, the Company attained PART-21G Certificate. In 2002 the Company was awarded AQAP-2110 Certificate. In 2004 WSK “PZL-Kalisz” S.A. was granted a license by The Polish Ministry of Internal Affairs and Administration for manufacturing and trading products and equipment for military and police force application as well as transfer of technologies. In 2009 the Company was awarded AS 9100 Certificate.

Our core competence is the complete production of complex parts in high quality for the machine and tool. This leads us rather to class instead of mass of: With lot sizes from 1 to 100 with high vertical integration, we are in our element. Whether pilot production, 5-er-lot size or prototypes - when it comes to quality, accuracy and problem solving, you should seek our services. We specialize in the complete production of individual parts and small series for general machines, jigs and fixtures. Our 30 employees work in a two-shift operation, so we can guarantee a high level of flexibility. Who want to make it must create. All the better if you do it gladly. Just as we: With 30 employees in two-shift operation. Certified to DIN EN ISO 9002. And still looking for improvements in AV, manufacturing and customer service. Perhaps it is due to our company's history.Actually there is the CNC production GmbH for over 30 years. As long as she was the CNC workshop of the TBT deep drilling. Your job: pilot series and small series and prototypes for special machine. When the TBT change of ownership, the department should be dissolved. The former production manager Franz builder acquired the majority stake and took over the management. Since then, the company has grown 50% Bonus, 25% revenue increase, five new employees - the numbers speak for themselves. From the former Department a successful company was. The recipe for success? A rehearsed, down to earth team, an uncompromising attitude to quality and the right mix of experience and youth.

For more than 50 years, ALFRED TRONSER GMBH has specialized in the design and manufacture of variable capacitors for professional electronics. Today TRONSER offers the world's largest selection of Trimmer Capacitors high quality. Have this experience, combined with fully equipped research, development and measurement equipment up to 6 GHz, CAD / CAM for the design of components and production machinery, in-house production of parts on CNC machines, own electroplating as well as tool and fixture us the preferred partner made the world's major electronics companies, when it comes to trimmer capacitors. The plant near Stuttgart employs approximately 100 employees and the subsidiary TRONSER, INC.. in the state of New York, USA approximately 20 Since almost all components are produced in our company, the focus can be more and more on the quality control, starting with an incoming control of raw materials, statistical process control during production to complete final inspection of each capacitor produced. The order processing as well as production planning is controlled by the latest computer technology. As a medium-sized family business operated TRONSER customers in more than 45 countries with high-quality trimmer capacitors, reasonable prices, short delivery time and good service.

We have been working for automotive and machinery industry since 1998. We mostly produce hubs, flywheels, clutch spare parts for automotive companies, and different type of parts for machinery industry. We have adequate machinery, quality contol equipment and educated staff to machine a wide range of parts. We believe that we have a competitive prices in casting (grey, aluminium,steel...) and sheet metal products. Our company is located in Izmir, Turkey, and it is just 15 min. away to Seaport and 30 min. to Airport. We are offering: - Turning - Automatic turning - Full-range turning (including milling) - Swiss turning - Turning - Milling - Form milling - HSC milling

With modern CNC machines from leading manufacturers, combined with effective coordinated production steps, we realize complete processing from the raw to the finished piece of equipment. We meet in CNC turning, milling and grinding work the highest standards of precision and production quality. PUNCTUALITY HIGHEST QUALITY QUALIFIED EMPLOYEES ADVANCED TECHNOLOGY And to achieve maximum productivity - this challenge we have set ourselves. Whether item or 1000 pieces - whether pure contract manufacturing or complete assembly - just ask us.

Precision that arrives Himself to the production and continuous control of precision parts we a lot of attention. Finally, we want only proper Deliver the components to make this an impeccable operation guarantee. Because quality made by Koestler's quality, can be trusted at all times. Promised Tool and mold for wide variety of applications We manufacture extrusion blow molding for: * The item production in the automotive industry * Components and Modules of Cell Phones * And other wide range of applications And parts production, small-and Mass production 3-axis, aluminum, steel / Cast steel and hard machining

Description see: www.schmidt-feinmaschinenbau.de

We are your competent partner in the field of metal cutting. Our special focus is on milling technology. The cheapest way we produce what in the lot size range of about 10-10000 piece. With very extensive experience in machining, clamping technology and assembly, we ask ourselves to you as a supplier for machined components and assemblies manufactured before. We can advise you and are pleased to provide you with our performance capabilities. Power spectrum ● Production of machined components produced from all popular as well as exotic materials on CNC machines. Milling in the standard: up to 600mm in length and 400mm width (it can but larger components up to 800mm x 600mm to be processed) Shooting: up to diameter 300mm and length up to 1000mm ● Assembly and production of complete assemblies Our strength lies not only in the production of individual components in series, but also in the manufacturing of complete assemblies including surface treatment and assembly. ● We get everything out of your parts - if they let us Besides the pure manufacture of your products, we also offer assistance in the design and complete engineering, for example when it comes to wanting to present to produce components of your portfolio more cost effective. Often there are several reasons that can make a cheaper component, without the be sacrificing accuracy and functionality needs. ● We make your components durable Highly stressed components hold only if all parameters are correct.To this end, choosing the right material is crucial. We are happy to advise you. ● surface finish, such as hardcoat, anodized and PVD coatings Also in terms of wear protection by coatings we have an extensive knowledge and working with well-known companies together Potential Coatings: - Hardcoat coatings on aluminum alloys - PVD and CVD coatings in multiple layers - Anodizing technically and visually in different colors - Galvanic and chemical surfaces technically and visually

Samson Régulation SA is the French subsidiary of the SAMSON group. Its 250 employees celebrated its fiftieth anniversary in December 2012. The site of Vaulx-en-Velin (69) hosts the headquarters of the subsidiary as well as the manufacturing plant. We manufacture part of the standard range SAMSON (valves globes, butterfly valves, regulators self-propelled) for the needs of our French customers. In addition, Samson Régulation develops and manufactures its own range of products and is recognized worldwide within the SAMSON group as a competence center range of food and pharmaceutical products Example of products developed and manufactured in France: - Spherical segment valve type 3310 - High pressure valve type 3252 - Hygienic control valve type 3347 - Aseptic valve type 3249 - Regulator 2371-1 and Diverter 2371-0 Commercial presence in France and French-speaking Africa is ensured by 9 branches: Lille, Cernay, Normandy, Nantes, Rueil, Rhone-Alpes, Bordeaux-Mérignac and Marseille-La Penne and Export. Large stock of complete equipment and spare parts, assembly workshop, setting, commissioning, after-sales service are our guarantees for a complete customer service.

Let us introduce ourselves The company’s headquarter is located in Speyer am Rhein. The origins of VETEC Ventiltechnik GmbH can be traced back to the original founding of the company in 1901. Adding a separate valve section in 1964 was the starting point for product development, whose solutions have been successfully monitored to date by our customers’ manufacturing processes. After renaming the company VETEC Ventiltechnik GmbH in 1985, this know-how continues to guide and develop the company. We have been a subsidiary of the SAMSON group - one of the leading companies for measuring and control technology - since 1988. SAMSON AG in Frankfurt am Main is the group’s parent company. By collaborating with this strong partner, we have a presence in engineering and sales offices all over the world.

Whether it is special machine construction or industrial plant, Item or series, we work according to the motto "Everything from one source". The customer does not need to worry about where he gets what, with us leaves the order as desired lacquered and ready assembled the house. This saves money, time and ultimately the customer money. Should it happen that we are unable to produce something in the company or a work step is unprofitable, we are happy to organize a third-party production. Our goals: Best quality, low cost, satisfied customer!

T.E.M.A. is a leading Italian company, specialized in producing precision mechanical parts. Our firm produces small mechanical parts from metal bars, up to 38 mm in diameter, making skilled use of Swiss-type CNC automatic lathes. All production in TEMA is managed and controlled by the most precise and advanced computerized measuring systems. We deploy the most advanced machinery available to enable us to fulfill every requirement, from the simplest to the most complex. Every part produced is released, complete with the measurements taken throughout the whole production process, based on the client’s specifications. Certification of materials, thermal treatments and surface treatments are also included. our firm has obtained the UNI EN ISO 9001: 2008 and UNI EN ISO 13485: 2012 certifications (medical standards). We are also leaders in the production of complex parts, with a broad range of materials, including any steel alloy, stainless steel, titanium, Ergal. Industries which appreciate the excellent quality of TEMA’s production range include: orthopedics, dental, biomedical, automobile, arms, food and drink, oil and gas, jewelry.

Diversity, delivery reliability, quality and at an attractive price. Are you looking for a reliable supplier who can react quickly and flexibly to your wishes? And you know exactly what is important? Then we are here for you. From development and construction to the finished component, from the custom-made to the series - with us you get coordination and know-how from a single source. Because we at ANKA have many years of industry experience and have a broad network of selected metalworking companies in Turkey.

We are a young, owner-managed company with headquarter in Wil / ZH. In addition to our engineering department, we manufacture standard and custom made products primarily for fine chemical, pharmaceutical, biotech, food and medical sectors. Our competent employees have many years of experience and know-how in precise and complex production of components and products that guarantees prompt, continuous, open and relevant interaction between customers and our specialists. Our in-house engineering department supports our customers in the areas of functionality, production optimization, selection of materials and surface quality.

HddsMachining has originated from the development of the prototype department of HddSurgery company, with a goal to offer our clients designing services, prototype development solutions and final product manufacturing using high-end software and hardware.

The company masters the most demanding welding technologies. We are a family business founded in 2017. Our key business objectives are excellence in the projects we work on and hiring highly skilled people to achieve excellence. Services: production and welding of metal products, Assembling various metal constructions maintenance work on the facilities, electrical installations.

“Dniprovsky special tools plant” LLC the largest company in the CIS specializing in the production of metal cutting tools (tool holders for turning and grooving, tool blocks, blades, mill bodies, drill bodies and atc) and accessories for enterprises in the metallurgical and pipe industries. For many years, our factory has provided factories in Ukraine, Russia, Belarus, Poland and Germany with standard and special metal cutting tools of European quality. The average staff count of the company is 150 people.