Refrigeration Equipment Factory PZL – Dębica S.A. has been active on the market since 1938. The speciality of the company is industrial refrigeration equipment. The production offer WUCH PZL - Dębica S.A. includes:  compressor sets based on screw compressors as well as single and two-stage piston compressors  units for ice water and chillers  air and liquid coolers  spray-and-evaporative condensers, vertical and horizontal shell-and-tube condensers  tank apparatus: liquid separators, horizontal tanks, inter-stage coolers, economisers, oil separators, dryers  refrigerating valves: cut-off, non-return, control, three-way, safety and pressure gauge ones as well as level gauges, filters and breathers  cooling and refrigeration tunnels for fruit, vegetables and poultry  refrigerating systems, cold stores and complete refrigeration plants  cooling equipment for mining industry In the production offer, there is also:  equipment for LPG gas: compressor units, valves, filters. In addition to manufacture of equipment, the company also provides production services. The full scope of offered services includes: making of steel structures and machine parts, machining, welding and gas cutting, plastic working and heat treatment. The offered equipment is designed for:  food processing, among other things industries of meat, poultry, dairy, brewing, fruit and vegetables  chemical industry  plastics processing  shipbuilding  mining Equipment manufactured by WUCH PZL - Dębica S.A. is working in a number of enterprises in Poland and abroad. The kind of run activities covers: technical counselling, designing, production, assembly of refrigerating systems, guarantee and post-guarantee service, overhauls and modernisation of used refrigerating systems, refrigeration training courses for customers and users of industrial refrigerating equipment. WUCH PZL - Dębica S.A. employs highly specialised technical staff and implements new technologies, thanks to that it guarantees the high quality of manufactured equipment and services. Many years of experience, co-operation with research centres, own design and construction offices as well as extensive technology and production back up facilities make it possible to manufacture products of the highest standard. Since 1998 the company has had the ISO 9001 quality certificate. Since 2005 the System of Quality Management has been certified for the compliance with the EU pressure directive. The equipment delivered on the market meets requirements of European Union directives and is marked with the CE mark.

Wage work in the working techniques MAG, NC turning, CNC milling, boring machine, wire cutting. Construction of tools, in particular tools for punching, notching, bending, forming and composite tools up to a size of about 2000x1000 mm and a weight of up to 5 Mp design and construction of welding and handling devices of all kinds

We are a medium steel manufacturing company with many years of experience in the manufacture and installation of steel and metal fabrications for industrial and social structure.

Mátra Industrial Commercial Ltd. Manufactoring, assembling and reparing of machines, equipments and steel-constructions, special machinery manufacturing. At present, we are producing in our manufacturing and assembling halls, which are 1,400m2 and 720 m2. The Caterpillar productions are carried out in independent manufacturing halls. In December 2005, a new manufacturing hall (1,600 m2 ) was inaugurated and started to product to satisfy our consumer's demands. One of our future aim is to develop our mechanical processing centre. Matra Machine Industrial and Commercial Ltd. was founded in 1992, as a German-Hungarian joint-venture company. Our main activity is to provide the manufacturing and assembling of machines, and equipments and steel-constructions. The products of our company are mainly sold at the western-European and at the German markets, most of them are high-storage systems, and other individual (unit) equipment. The market share of our Company have also been growing significantly on the Hungarian market during the last years. Our products are sold now all over the world, from Brazil to Singapore, from the USA to South-Africa. Portfolio: - Material Transport Equipment, Conveyors - Manufacturing of Machines and Equipment Serving for High-Storage Systems - Manufacturing and Installation of Different Sorts of Equipments for Theatres - Manufacturing of Unique Machines and Equipment - Steel-constructions

DESMA is the leading international supplier of injection molding, molds, automation concepts and services for rubber and silicone industry. With its own activities in Brazil, China, Germany, India, Japan, Mexico, Slovakia and the United States DESMA has a global, professional and powerful network in all major economic and growth regions of the world. The machinery and equipment DESMA are in the world of sealing, vibration, electrical and medical home. Fairness, openness and entrepreneurship are at DESMA in the foreground. The slogan "DESMA - and the business is yours" is program to increase the value of competition benefit of customers. DESMA delighted their customers through value-oriented solutions characterized by reduced life-cycle costs, which thus expresses itself significantly increased cost of the investment and first-class quality. DESMA. Systems, machines, molds and Service for rubber and silicone.

Powder coating, stainless steel processing and metal

The Franz Huber GmbH is a recognized supplier companies with 25 employees, located in the areas of Mechanical Production (range: x 7300, y 1500, z 1800 mm), oxy-fuel cutting and welding constructions has been established in the southwest of Germany. With our new machining center we are able to process work pieces with a length of up to 7.30 meters and weighing up to 10 tons with maximum accuracy. In June 2009, we received a new machining center with rotary table 2500 x 2500 mm (parts up to 25 tons). Our qualified staff that has a sound training (technicians and master craftsmen and welder qualification tests) and our modern machinery to help us quickly and reliably to the needs of our customers to take. We manufacture assemblies, weldments, cut parts and assembly units are stress relieved to customer, sand or glass bead blasted and painted.

Our company was founded in 1991 and continues to evolve forward. Next to the stairs production, the manufacture of gates and fences, railings and general metal more and more connections develop in the direction of machine and plant engineering. The manufacture of welded assemblies and machine base frames plays an increasingly important role. Extensive machining for large parts are possible on nearby farms cooperation. With subsequent powder coating, we supply finished assemblies to our customers. We currently employ total at both operations a variable workforce 25-30 man! Farmer for both companies - Mr. Alfred Wojan We hope to have piqued your interest and we look forward to inquiry and orders from you. Our Service - Manufacture of welded assemblies and machine base frames after .. Drawings. By the client - Exhibition of stairs, gates and fences - Advice and accurate measurements on site - Extensive machining and hot-dip galvanizing on . Kooperationsbetriebe.möglich - Installation of metal stairs, gate and fence systems in the radius of 50 km - Corrosion protection / coloring - Organization of transport to the customer We mainly manufacture welded assemblies for mechanical engineering and plant construction, steel St 37 area and St 52, processing of profile steel sheets, by the possibility of subsequent powder coating, we are bound to the following dimensions - Oven size 9m x 2,5 m x 3m trouble-free coating possible 8m x 2,3 m x 2,8 m to 2.5 T unit weight

Wittbecker & Birkmann Our company is a modern and dedicated manufacturing facility, which is located in the industrial area Schnathorst and transport links providing easy access. We carry general metalwork with a focus on sheet metal processing in individual productions as well as Großseschliffrien for the industry. Wittbecker & Birkmann was founded in 1991 by Rainer Witt and Klaus Becker Birkmann. The two-man operating a modern medium-sized company has evolved over the years. In 1999, the operation moved into the industrial area Schnathorst. We started with a building area of 1500 m², in the fall of 2004, we have once again grown and now have a production area of 2400 sqm. Production The operation of the process begins with the structure. This is you - provided, or we turn your ideas with cutting-edge 3D software - our customers.Where we are also happy already in the design phase are with our many years of experience. The next step is flat processing: From the green sheet, the blanks are cut out. This is done in the simplest case with scissors. Once outside contours, drilling patterns or transformations to come, with the laser or punch. When Combined machining the respective advantages of stamping and lasing are intelligently linked. If necessary, we can now provide the workpiece with a surface finish or remove any machining marks, burrs and oxide layers. The mechanical machining such as CNC drilling, cutting, grinding and rubbing thread is fitted as required in the production process. The Abkantarbeiten required to be completed with the help of modern CNC-controlled machines. To join, we use the usual welding processes, as well as rivets, bolts, soldering, etc.one. Since we manufacture not only items, but also complete assemblies, you can buy from us your product from a single source. For surface finishing are our competent partners, the coat your parts powder painting, zinc galvanize, galvanize and fire can anodize.

We made the cutting parts on CNC cutting machine (oxygen and plasma). We are able cut steel plates (S235, S275, S355, C45 etc.) of thickness from 1mm to 200mm. We can offer welding steel construction to weight 6000 kg and machining on horizontal boring machine. More information om e-mail rod@kovpal.cz.

We are family company, established at 1998. We have our own base 4000 m2 covered area. We have engineer constructor in house and workers with more then 5 years experience each. We work with foreign companies from 10 years and we have fair and quick communication response. Our main business is producing stand alone metal stoves and fireplaces on wood and you can check them in our web site. We have free capacity and we looking for reliable and long term partners

Ingenieurbau Bismark (IBB) GmbH was founded in 1990 and is headquartered in 39629 Bismark. Ingenieurbau Bismark GmbH currently employs 38 people. The core area of the company is steel and plant engineering. The product profile covers the design, manufacture and assembly of complete steel buildings in system construction as well as special structures. Production takes place in a production hall with an area of 6,000 m². The core of modern production technology is a PCD 1100/1100 DG CNC drilling and sawing machine. This means that steel profiles up to a height of 1,100 mm and a length of 22 m can be processed automatically as far as possible. A computer-controlled NC drilling machine enables the automated production of flame parts from thick sheets up to 60 mm thick. For the production of industrial railings, ibb offers a modern CNC mandrel tube bending system with integrated rolling and ring bending equipment. 11 floor-controlled or radio-controlled bridge cranes enable effective handling of steel structures with a single piece weight of up to 15 t. A modern and powerful continuous blasting system with a throughput width of 1,500 mm and a newly built paint spray house with underfloor extraction with an area fund of 500 m² ensure the high-quality execution of paint coating work and anti-corrosion coatings. Since December 2000, the ibb has been certified in accordance with DIN EN ISO 9001:2000. Ingenieurbau Bismark GmbH has the manufacturer qualification for welding steel structures in accordance with DIN 18800-7:2002-09 for welding processes 111 Manual arc welding (E) 135 MAG welding (t MAG) 783 Ignition stud welding (DS) and has had the WPK certificate in accordance with DIN EN 1090-1 and the steel construction welding certificate DIN EN 1090-2/EXC3 since 2013. Ingenieurbau Bismark GmbH employs highly qualified and experienced architects and specialist engineers and is therefore able to plan complex construction projects and carry out qualified construction management.