We are a small company that specializes in small series and very small series as well as single part and prototype production. Our equipment includes a plasma fine blasting system, a water jet abrasive cutting system, drilling, turning and grinding machines as well as welding workstations.

MKW is a leading manufacturer of plastic and metal products and one of the largest powder coating companies in Austria. Furthermore, MKW is one of the leading manufacturers of toilet seats in Europe. OUR CORE COMPETENCES. •metal technology •Plastics technology •Powder coating •Sanitary

Sheet metal work in steel, aluminum and stainless steel as a simple cutting, punching and Kant part or as a complete assembly. Flexible and efficient working to deliver a prerequisite to quality with us on short notice and on schedule. Punching: 3000 x 1500 x 4mm (steel & aluminum) 3000 x 1500 x 3 mm (stainless steel) Edge: 3500mm 1300kN Welding: TIG, GMAW, Stud & Spot Welding Special: Tool cabinets for punching and bending tools from our own production In cooperation with other companies, we also offer laser cutting, powder coating, pickling and passivation of stainless steel and electroplated zinc.

Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

RUPREC Industries is a company specialized in high-precision CNC machining (3 and 5 axes), turning, EDM, certified welding, mechanical assembly, and dimensional control. With a strong focus on quality, precision, and innovation, RUPREC operates in the aerospace, electronics, pharmaceutical, food, and packaging sectors, providing high-performance technical solutions. With a presence in Portugal, Spain, France, Germany, and Switzerland, the company stands out for its responsiveness, flexibility, and commitment to excellence in every project.

We take steel construction to the next level. This is achieved primarily through a well-developed manufacturing structure and our acquired expertise in Germany, Romania, and Moldova. Whether in mechanical engineering, vehicle construction, or special structures – we are your partner for high-quality steel processing, produced directly at our facilities and those of our subsidiaries.

Since 1988, Steel Lavorazioni Meccaniche has been manufacturing medium to large mechanical components through high-precision machining. The multisectoral approach and the long experience on the multiple types of materials make us the market leader. The company is headquartered in Motta di Livenza, in the province of Treviso, where our large fleet of machines allows for high specialization in: ●Milling ●Turning ●Deep drilling ●Water cutting ●Tangential adjustment We are specialized in the production of plates for the production of PET preform molds and we have a solid and heterogeneous customer portfolio. In fact, we produce a wide range of products for multiple sectors including •Aeronautical •Food •Automation •Packaging •Recycling •Nuclear Our machine park consisting of 44 work centers allows us to guarantee certain and competitive processing times, maximum quality and precision even in large components up to 6 meters in length. The meticulous checks in the metrology room ensure the quality of the production processes and ascertain the dimensional correspondence of the pieces produced. In 35 years of experience, we have become a leading company in the sector. We support our customers with know-how and innovative technologies to offer a complete service that ranges from the selection of materials to technical construction support for the choice of the best construction solutions. Thanks to the experience gained in collaboration with WRS Waste Recycling System, our partner company, we can also create pre-assembled mechanical groups with the parts produced in our workshop. Our quality system meets the most advanced standards and guarantees tracked, controlled and replicable process management. Steel Mechanical Processing is also certified according to the strict requirements required by the specifications of the aerospace and nuclear industry.

The mechanical engineering company with production on conventional and CNC-controlled machines With a large network of manufacturing partners and suppliers, we have access to an extremely large number of manufacturing methods, as well as processes, CNC machines and thus always free capacities and secure supply chains for your projects, which range from prototypes to series production and we have ours Support projects on schedule. Such a large spectrum allows both large components, as well as the smallest components, to be manufactured with the highest precision. You benefit from individual offers, short delivery times and competitive prices that we pass on to you. We have experience in processing a wide variety of materials. The materials are procured exclusively from qualified suppliers. A constant examination of the latest production technologies and materials enables us to recognize innovations and implement them for our purposes.

Our experience — your added value With over 30 years of tradition, metalution GmbH stands for a reliable machining technology company. Precision, quality and reliability form the basis of the company's philosophy. We are happy to share our experience and know-how with our customers. The company not only has expertise in mass production of parts, but is also an important partner in single-piece production, for example for well-known tool and mold makers. Our customers also include companies from the mechanical and plant engineering sectors. In order to meet these requirements, we rely on highly qualified and independent employees. This makes metalution GmbH flexible and competitive. This niche focus with the right mix of series and single-piece production for machine, mold, device and plant engineering is the basis of our success. In order to ensure this success in the long term, we are always one step ahead of the competition in our work. We encourage our highly qualified employees to work independently so that they can further develop their skills and inspire with quick, flexible and innovative action. “Experience” = the highest level of know-how and sophisticated technology in collaboration with our customers “Flexibility” = project and process management of the highest quality The metalution GmbH plant Usable area: 4120 m2 Production area: 2586 m2 machines 16 milling machines 4 grinding machines 1 laser marking machine 1 waterjet cutting system

We are a young, dynamic company and manufacture products made of steel and stainless steel, using separate production areas. We meet the requirements of EN1090 -2 in EXC 2 and ISO 3834 3. We produce welded structures on a production area of around 800m².

As a company, we have over 30 years of experience in production by machining, heat treatment, thermo-chemical treatment as well as welding operations. We manufacture for the largest brands in the agricultural and construction machinery industry on the market. Aware of the importance of quality in production, we have developed the quality control process from audit and supplier qualification to a well-equipped laboratory that allows us to verify the structure of the material before entering the production process as well as to monitor the quality of production in progress on an ongoing basis. We manufacture single parts delivered to our clients ’assembly lines as well as provide the assembly service of units from parts manufactured in our plant. Our large portfolio of over 3,000 different products is being made in the 18,000 m 2 production hall. Precizo has an extensive machine park, which consists of the most modern numerically controlled machines, including Automatic Lathes, Milling Centres and conventional machine tools.

P&M tools construction is a young company that was founded in 2018 by two mechanical engineers with many year od experience. The company was founded to offer the market new conceptual solutions, as well as to contribute to the development of the auto and machine industry. In addition, we deal with tool making, modeling and programing. We offer welding of complex assemblies as well as laser cutting of materials.

Hitega Präzisionsmechanik GmbH is an owner-operated, medium-sized company specialised in precision technology. For more than 20 years and with over 100 staff members, we have been realising the technical concepts of our customers from the automotive industry, clean technology, semi-conductor industry, aerospace industry, medical technology, as well as the optical industry and the devicebuilding industry, innovatively, precisely ad efficiently in our plants in Gangkofen, Southern Germany, and Penang, Malaysia. Hitega is the specialist within the field of precision technology. As our customers’ partner, we take on the complete building of special machines and, as an OEM-Serviceprovider, we manufacture high precision modules and put together modular systems with electronic, pneumatic and optical periphery. In doing so we master the complete process, ranging from engineering to manufacturing and assembly processes to the quality-ensuring operational test, as well as procurement and logistics. Our actions are determined by the challenge to always offer a convincing benefit to our customers. Our fields of expertise: conception manufacturing assembly testing & inspection and distribution of high precision modules, modular systems and special machines with electronic, pneumatic and optical periphery We master: Engineering and project management Single and series-production of high precision modules and modular systems Assembly of mechanical modular systems with electronic, pneumatic and optical periphery, Production and assembly of prototypes Surface refining, laser welding and laser inscription of modules and modular systems Testing and checking of high precision modules and plug&play modular systems according to the customer’s specification Specialised procurement management Logistics

We are a young company with activate in metal industry such as: metal parts cut , welding parts, powder coating parts . we try to offer to our clients suitable solution for their demands according with cost/production. Our motto is - One Stop solution - why? because in our shop we can produce from the fase of design to the end - cutting,ansemmbly, welding , painting .

My name is Maria Sreic, and I represent small Serbian family firm MAG CREATIVE doo, a company specialized in metal processing and fabrication, based in Vrnjacka Banja -city in Serbia. We are reaching out to explore the possibility of establishing a sub supplier partnership. With years of experience in precision metalworking, welding, and custom fabrication, we have supported companies across various industries by providing high-quality components and solutions tailored to their specific needs. We believe that our technical capabilities, production flexibility, and competitive pricing could be of value to your operations. We would welcome the opportunity to introduce our services in more detail and discuss how we could support your projects as a reliable subcontractor. In our 5000 m2 production place, we have CNC , NC machines ( drilling machines , milling machines, borverk machines, cutting shears,plasma cutting,laser cutting, bending press, grinding,etc.. ) and 30 welding machines. Beside of all during the past 8 years our firm producing sub-constructions and complete assembled containers for the different use in industry. I must mention that more then 80% of our production is going for the foreign market, so we have a very good export position and more then 25 years of wok experience. . You can see more info about us on our web site: www.mag-creative.rs We look forward to the possibility of working together. Warm regards

CMI M + W is a specialist in repair and maintenance of industrial plants and plant components. From troubleshooting to long-term plant and component optimization, we provide our customers in the steel and rolling mill industry integrated solutions. Furthermore, we manufacture for special customers high-quality machine components as single pieces or small series. We have set ourselves the optimization of the availability of manufacturing equipment or components to the target. For the CMI M + W, human capacity and specific service and workshop services well equipped with modern technical equipment. The ability for mobile machining with you suburb with its iPod portable CMI M + W Precision Machining machines combined with the expertise of our teams in the field of special machine and workshop resources in the background ensures the CMI M + W customers a fast re-start of production.To ensure your requirements CMI M + W uses manufacturing capabilities and experience of over 50 years, machine and tool in the heavy, steel plant and rolling mill industry. The integration into the global CMI Groupe, the modular handling of specific CMI M + W equipment and the ability to adapt to the diverse needs guarantees our customers the efficient implementation of effective measures. Translation by Google Translate

Our company was founded in 1992 as a vehicle and metal construction company. From the outset, manufacturing components was part of our core business. At both civilian and military levels, solutions for every application were designed in-house and produced in all materials. From prototype construction to medium-sized series, everything can be realized at our location.

Our company has over 50 workers in manufacturing and assembly. We offer complex services from design to final assembly all over the world. We can offer you steel construction, sheet metal construction, mechanical engineering, pipelines, conveyor systems and much more in the highest quality and at a good price. Feel free to ask us, because we will be happy to offer you any request free of charge.