Single part production, presses, forging hammers, repairs of all kinds, on-site processing of large machines

We are a company that deals with modernization, design and installation works, as well as performs relocation works. More than sixteen years we are engaged in the production of metal structures, installation of industrial equipment, modernization and relocation of production facilities in Ukraine and Europe. Our company manufactures any metal products to order according to individual drawings.

Quality since 1879 we deliver blanks or finished components The Albert Pielhau drop forge has existed since 1879 and is still run today as a family business in Halver. As in all areas of our company, our ISO 9001 certified quality management system, our ISO 50001 certified energy management system and our ISO 14001 certified environmental management system form the basis for our actions. Blank or finished assembly — it's all no problem. In addition to processing all common types of steel, our specialty is the processing of stainless steels. Depending on customer requirements, we deliver blanks, machined prefabricated parts or assemble our forged parts into ready-to-use components. When assembling components, we are not limited to parts that were manufactured by us.

For over 30 years we have worked with our experienced and flexible team in all areas of steel and mechanical engineering. Together with our subsidiary SMR, we are certified by TÜV Nord for the manufacture of pressure vessels and parts after AD 2000, as well as welded structures according to EN 729-2, ISO 9001:2000. We also have a welding certification by Germanischer Lloyd Hamburg and the Hamburg Police, we have permission to perform hot and fire works in accordance with § 3 paragraph2, No. 1 LGGVHH in the area of the Hamburg harbor. Extensive large-scale projects to be mastered as reliable and on time by our team 35köpfigen how little detail and special tasks. Through our temporal flexibility and reliability we could term customers in Germany and abroad gain (see "References"!) We are specialists in the custom-made of individual parts or small series, but also have permanent product in our product such as ABC ... Grille, weld bracket, drive shaft Tank construction, operation repair Container Spreaderbau Turned parts Stainless steel brackets, extruder inserts Foundation plates Counter flanges, housings, railings, machining of large parts, base support ... Crane work / repairs, piston manufacture Pressure gauge, mounting rails Notbolzen, NH3-cutter Frame according to drawings, rings, pipes Gears

They come to us with an idea and go with a finished product. Our state of the art equipment enables us to position everything started to realize to the finished welded housing in computer-aided design (CAD). Through cooperation with competent partners, we are able to offer also painted and coated parts. We manufacture the most modern CNC-controlled machines both single and series parts. Our modern programming system allows us to take ready-made customer drawings as DXF or IGES file directly or scan-drawn templates and further process, so that geometrically well-defined contours, such as lettering or graphics may serve as processing templates for laser cutting.

Workshop for the Disabled of Special Education Centre Irchenrieth eV For over 30 years in charge of the special education center for disabled eV people with special needs. At our institution, therefore, also includes its own workshop for the handicapped (WfB). This can compete with the private sector is well - both technical and human resources. We are equipped with advanced computer-controlled machines and employ both in the care of the disabled employees / inside as well as the planning and organization of production exclusively professionals. Great is the bandwidth of our production. We take orders from the fields of metal, plastic, electric and wood, but are prepared for work in fixture and mold construction. The WfB is therefore quite an attractive and efficient business partner. We offer quality and service!

We are a medium sized company and our core business is the production of special machinery parts for the industry, both in mass and individual production. We can look back on more than 50 years of experience and are your reliable partner for the development and procurement to manufacturing to logistics. In addition, we also use a high degree of flexibility in our production processes, so that we can always realize aktuelleste requirements and wishes of our customers in the shortest time. What we can do for you: special machine parts - assemblies - Components - mass production - Custom manufacturing - Procurement - Delivery - Logistics - Machine Tools - Machine Parts - Mechanical Engineering

Who we are Founded in 1904 as a small company, we have developed into a powerful medium-sized companies in the metalworking industry. Business far beyond the borders of Germany, Denmark, Sweden, Austria and continue to talk of the reputation of our company. What we offer We offer a wide range of stove and fireplace accessories and household goods of all kinds We also offer Punching up to a force of 125t, gas metal arc welding, spot welding, powder coating and the production of 2 or 3-dimensional wire bending parts as services in our company. Our goals Satisfied customers, as well as flexibility in our product range are self-evident for us. Accurate delivery date and a consistently high quality of our products are a must in our company. We hope to have piqued your interest and look forward to a good cooperation.

Idea as a supplier of major components for mechanical engineering and plant engineering Since 1961 Werner rice Maschinenbau GmbH produces high-quality, challenging work pieces and components for mechanical engineering and plant construction. Our range of services covers the following areas: - Production Technical support eg for new designs - Complete material procurement - Steel construction / welding work - Heat treatments - Machining CNC Machining - Surface finishes The existing modern CNC - machines is geared towards the machining of large components, large milling parts, boring machine, etc. with very high accuracy requirements. In many cases demanding production workpieces such as machine bed, Traverse, longitudinal beams, cross members, sleds, substructures, boom, tower, gearbox, transmission, etc., were made by us For more information, please refer to the attached documents. We hope your interest in our company we have awakened. For further questions please contact Mr. Rabiega or Mr. Rice are at your disposal.

Since 1992 our company has been dealing with the cold bending of hollow sections. All started in the first half of the ‘90s when we intended to produce bent-metal furniture. After having mastered the bending technology of ordinary tubes made of constructional materials, we proceeded to a more demanding technology of the bending of thin-walled tubes having the bending radii under 2D of the tube diameter. Using special tools, such as ball mandrels and smoothing devices, we are able to achieve high quality of a bending both from the visual point of view and in maintaining a minimum tube diameter deformation. We obtain similar results not only with materials made of construction steel, but also with materials made of anti-corrosive steels and aluminium alloys. We also get good results with the bending of square and rectangular sections. The main part of our production program consists in products manufactured in cooperation. These are components of shop equipment, protective frames of cross-country cars, series of various bent holders, frames, reinforcements of agricultural machines and injection piping. Other supplementary technologies are grinding of tubes under chrome, tube and section twisting, horizontal forging, MIG and TIG welding. At present we have been looking for partners to be able to use the full capacity of our bending machines.

We are a metal company with 45 employees. We manufacture and install gates, doors and facades made of materials as steel, aluminum and stainless steel. Our Prdouktiosnprogramm: Steel doors and gates with optional double glazed opening, ventilation blinds, side panels and top panels Fire and smoke protection doors rotary RS, T30, T90 with optional side panels and top panels. As a multi-function door with a request to fire, smoke and intrusion protection (up wk4). Soundproofing 1-leaf to 45dB, 2-leaf to 42dB, sheet thickness 1.5 mm. Door (T90) with request to increased air tightness tested to 1200 Pa. Door panels for existing frames and options for installing a new frame without dismantling the old frame. Tubular frame doors and glazing RS, T30, T90 aluminum, steel or stainless steel Fire and smoke protection sliding gates RS, T30, T90, T90 telescope Top flap T90 for horizontal installation with opening aid Steel sliding gates for industrial, commercial and hospital sector (OP-doors) optionally with electric.Drive light cutout, radiation protection etc. Folding sliding (thermally separated or not separated) for your production halls, 3-7-bladed Ventilation blinds for closing / opening or fixed, with fly or bird screen CNC sheet metal hole, burled panels, flashings, including coating CNC milling, drilling, flow drilling (for threads in thin-walled tubular sections), cut threads until XYZ 6500 x 240 x 240 mm, machining of aluminum, steel and stainless steel (please send drawings)

Our specialty is the making of table, assembly and base plates and welded constructions of all kinds Finished Furthermore, we supply and install high quality Spare parts for WOLF wood sorting trains and tower cranes. As a highly skilled traditional handicraft business in Supply sector of the engineering industry, we guarantee highest precision, flexibility and reliability in all production areas: Special machine CNC milling up to x = 3500 y = 1200 z = 1500 Flame cutting up to 1500 x 3000 x 120 mm; Sand blasting - even very large objects Lang Planing Paint Repair and replacement parts for WOLF wood sorting trains Rental of mobile cranes 2 x 40 tons. 1 x 50 tons.

The MTM Matthias Tuchscherer Maschinenbau GmbH is an owner-managed company and a competent partner in the field of mechanical processing of pre-finished metal components and the assembly of modules. Equipped with advanced CNC milling and CNC turning centers and CNC measurement technique, the company produces prismatic parts, lathe parts, tip turned parts in a batch, small batch production and medium batch production. Products Axes, blocks, straps, covers, flanges, housings, brackets, levers, brackets, manifolds, hub, plates, pulleys, connectors, welded parts, beams, profiles Material Be processed components made of steel, stainless steel, cast iron, ductile iron, malleable iron, cast aluminum, copper, cast iron, cast brass, red brass Manufacturing process Our machinery enables the complete machining of demanding machined parts and turned parts. CNC milling (multi-sided machining, 5-sided machining) CNC turning (lathe parts, tip turned parts) Surface grinding Heat treatment, surface treatment Our services are complemented by an extensive selection of heat treatment process (annealing, tempering, inserting, hardening or case hardening, nitriding, nitro-carburizing, plasma) and surface coating (painting, bronzing, galvanic zinc plating, yellow chromating, Blauchromatieren)

Since it was founded in 1993, Agro Line has established significant domestic and international relationships in the production of carbon steel. We are supplying in our 20,000m2 production field, with 230 employees more than ten internationally renowned Western European strategic partners like: Ammann, Behringer, elumatec, Willibald, Goldhofer. We are able to provide the complete process of production according to the customer’s requirements and documentation especially machined parts up to six metres in size.

We are your reliable partner for the following areas: Tool mold Plastic injection Punching and bending technology We manufacture according to DIN EN ISO 9001-2000 and offer our customers: Expert advice Product Design Tool design Surface finishing Hot and pad printing Assembly

Business Since 1912 high-quality and technically supply parts and systems for various industries are produced in STEINBACH. From product and process development to series production is STEINBACH the customer in the role of the problem solver and innovative experience to the side. This customer-focused business strategy, high-tech innovation and good qualification and motivation of our employees are the foundation for successful business development. Production spectrum - Industry Due to the high performance potential of manufacturing and product diversity STEINBACH has taken in the supply chain a firm place. Internationally oriented companies are in the automotive, electrical, mechanical, printing and banking industry and military technology to their regular customers. Corporate policy Customer / market orientation Our services include on customer value and customer satisfaction oriented high-precision punching and laser parts and related assemblies as well as technical solutions. We deliver flawless products of high quality from date and quantity requirements. Employee orientation We want performance-oriented, innovative and team oriented employees. For self-responsible performance of their work tasks we give them an appropriate competencies and encourage the cooperation and communication. Organization, process orientation, improvement We believe our management system transparent, lean and powerful. Quality is the result of controlled processes and is planned, created and saved by each STEINBACH staff. We are constantly improving our processes, procedures and products according to customer requirements and increase the share of value added. Suppliers orientation These are actively involved, evaluated and developed in the planning and problem-solving processes. Technologies * Stamping, drawing, forming on eccentric from strip, plate, coil (max.400 to) * Fine cutting (max. 400 tons) * Laser Cutting * Bending CNC * Milling * Drilling, reaming, tapping, broaching, honing * Rivets (various methods) * Welding (TIG, MIG, MAG, point, pulse, 6-axis robots) * Brazing in inert gas continuous furnace * Cleaning methods (hydrocarbon / alcohol modified) Manufacture and distribution of products such as high precision, fine blanking, stamping and bending parts with mechanical finishing and connecting and joining technology, and the Betrebsmittelenwicklung and construction for the Automobiliendustrie, equipment / plant and other