As a regional company, we, HEK Präzisionstechnik GmbH, offer small, medium and large series components in the following technical areas: • Milling: components up to 990 mm long, 700 mm wide and up to 350 mm high • Turning: Machining components up to Ø450 mm and 500 mm in length • Small module assembly • Any surface treatment, such as components with polishing • Measurement reports included (Keyence IM 8030T) What makes us a potential supplier is our delivery reliability, the quality of our products, many years of experience and, above all, the requirement for ourselves to achieve the highest possible level of customer satisfaction. On request, we have the option of storing long-range products in our company to ensure timely deliveries. Flexibility is very important to us. We would be delighted to work with you and to count you as one of our satisfied customers in the future. Have we sparked your interest? Then feel free to get in touch with us.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Innovation in sheet metal production Martech GmbH specializes in sheet metal parts and complex welded structures in chrome steel, aluminum and steel with certified welders according to SN EN 287-1 / 9606-2 / DIN 3834 with its own welding engineer Our own engineering has the most modern 3D CAD systems to efficiently process customer needs, our services range up to the strength calculations of the components. Small parts of a few millimeters and material thicknesses of 0.2 - 30mm up to large constructions of max. 6.3 tons - lot sizes from 1 to thousands Thanks to our modern machine park (automated combination machine TruMatic 7000, latest flat laser technology Trumpf FIBER 5040 6kW 4 x 2 m automatically connected to the sheet metal storage and a Bystronic water jet system 3 x 1.5 m) and our sheet metal storage with up to 1,200 tons of sheet metal (stainless steel, aluminum and Steel in all qualities) we guarantee the shortest delivery times. Many long-standing customers from all areas of industry, pharmaceuticals, medical, defense, aviation, food technology, machine and vehicle construction are convinced of our services, high quality and competitive prices. Processing options: - Flat laser 4x2m - Combined processing 3x1.5m - laser welding - bend up to 4m and 320 to - Profile milling machine up to 3.5m - 3D CAD systems - Press-in fixture HAEGER Laser engraving machine - water jet system - pre-assembly - assembly production - prototype construction - series production - Surface treatments with partner companies

Special machine for Wagner: Everything does not exist! We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally! Mechanics, hydraulics, electronics - we have the professionals at work We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again. Produced entirely in Germany We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!

Welcome to MV Blechbearbeitung ! In the north of germany we are Your reliable partner for laser cutting ( sheets an tubes ), punching and bending, Milling and Welding up to ready-to-use constructions. The welding workshop with its high levelled qualifications will meet Your requirements - certified acc. ISO 1090 EXC 3 for steel, stainless steel as well as aluminium. MAG, WIG manual welding, laser welding upto 5 mm, robotic welding up to 500 kg piece weight at highest quality level.

Production of simple to complex CNC short and long turning parts, and chuck parts up to diameter 300 mm with modern equipment (since 2008, for example. Multifunction turning center OKUMA MAC TURN!), V2A and V4A are our strength but also cutting steel, aluminum and brass .. . Batch size 10-100000 pcs Milling on machining center to parts of size 500x500x500 at low prices from 10 to 10,000 pcs. Lot size MUZ designed according to customer's requirement machinery, special purpose machines and implements its implementation to the final product or system as a complete package. Due to the family-related Locksmith, we are also able to customize welded structures quickly and kostengünsig. The bodyshop directly in the annex building permits without long transport routes to paint the machine components. Our strength is flexibility and performance! At this point you will get an overview of the company MUZ mechanical engineering and machining: Design, planning and manufacturing of lathe parts, short lathe and CNC lathe and CNC milling parts are our core competencies.We are able to manufacture both prototypes as well as large production runs reliably and on time. We build your machine, system, or like to only your module completely incl.all units, electrics, hydraulics and pneumatics. Through our incredibly powerful machinery we are able to also realize your machines, special purpose machines, systems or assemblies quickly. Come to us if you are around a professional partner ... Require milling parts, CNC machined parts, Aludrehteile, aluminum turned parts, turned parts, short turned parts, CNC turning parts, dental machining parts, stainless steel turned parts, deburring, glass fittings, glass canopies, plastic machining parts, Grinding parts, point holder, lathe parts, glass fittings, glass point fittings, stainless steel end caps and machining. Our knowledgeable staff look forward to your wishes and ideas. Do you need high-quality services, a sustainable service, expert advice and an easy and cost-effective processing? Come and join us, your MUZ engineering and machining, YOUR STRONG PARTNER.

Containers and tanks in all materials, shapes and sizes e.g.: GFK (glass fibre reinforced plastics), PE-HD, PP, PVC, PVDF and as composite material like PVDF/GFK or PP/GFK carried out as round, rectangular, oval or triangle containers / tanks, also with insulation and / or cooling and heating mechanisms for special assemblies. Milling and turning parts made of all plastics (precise CNC-machining of PP, PE, PVC, PVDF, PTFE, etc.)

The Stahlwasserbau Beeskow GmbH is a regional leader in the fields of steel hydraulic, materials handling, industrial and commercial service. We offer our customers complete solutions from a single source - engineering, production, installation, maintenance, service and repair. Here are excellent quality and flexibility to the company's strengths. Achieving total customer satisfaction, but we work with our more than 80 employees every day. In 2015 we won the Innovation Award of the State of Brandenburg and have been awarded in 2016 as a finalist at the Grand Prix of the middle class, which we are very proud.

C.M.B. SRL is a company specialised in the industrial assembly of mechanical, electromechanical and electrotechnical components, the pre-assembly of units and the assembly of automatic and semi-automatic machines. Our job is to support companies to produce: we propose ourselves as your production partner and we can follow the entire production process, from design to the finished product. In over 40 years of activity, we have structured and organised ourselves to develop and implement this activity for every industrial sector. Our experience and energy have always been oriented in this direction because we want to produce technology, technical excellence and innovative products. We are specialised in the production and machining of carpentry, industrial assembly of mechanical, electromechanical and electrotechnical components, pre-assembly of units and assembly of automatic and semi-automatic machines. We also have in-house machining and repair departments, a robot island, a collaborative welding robot and an industrial painting area. We are complementary and synergetic for all electronics, automation and software houses.

For Tresoldi & Casiraghi, producing quality is more than a mission; it has always been a true passion. Since 1962, the year the company was founded, this passion has been reflected in the production of carpentry, which over time has won recognition on the Italian and international markets. A way of working that marked the transition from the craft dimension to the industrial and technological dimension in order to ensure competitiveness and offer only the best at always competitive prices. Progress has been made not only in terms of the number but also in terms of the security of internal processes and respect for the external environment. A success that is thanks to the daily commitment of a group of people who are able to look at the challenges of the future with the same enthusiasm as on the first day. The company employs personnel who specialize in welding, bending, stamping and assembly. The welding work is carried out by qualified personnel who have the following qualifications: WIG — MIG — MAG — ELECTRODE. We are also able to issue mechanical test certificates and non-destructive test certificates.

We are a specialized manufacturing company with a focus on precise individual parts in the field of tool, machine and fixture construction, manufactured on modern 3 and 5-axis milling machines, CNC turning centers and by wire and sink EDM. In addition, we offer surface and cylindrical grinding, component assembly including functional testing and the organization of proven third-party services such as hardening or burnishing — all from a single source. Our production is based on digital processes: Whether samples or series parts based on CAD data — we take over your data sets and process them directly via our CAM software. Thanks to automated loading systems from BMO, we guarantee economical and reliable production — even with complex requirements.

Company description Looking the whole manufacturing from a single source? Put on the right partner, because it gives you the necessary freedom for your core business. Send us your drawing. We procure materials, rework the parts, ensure the coating and monitor the entire production process until you can use the pre-finished workpiece on time available. Mcon GmbH (Austria) has specialized as a supplier of high-quality production parts. With years of experience in mechanical engineering, we were able to establish ourselves very well in the domestic and European market. Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors. With this basis, we like to solve your challenges! OUR SKILLS We put our focus on products that we have been perfecting. In order to offer our customers perfect products, we focus on the following areas of expertise: • Frästeile • Turned parts • weldments Especially in the mechanical engineering, plant engineering, transmission engineering, railway and traffic systems, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured products and the fast service. Frästeile: Quantities: Small, medium and large series Dimension: Max. 500 x 1200 mm Material: Steel, stainless steel, nonferrous metals, plastics surface treatment Curing, painting, nitration, anodizing, coating, Brin Irish. Turned parts: Quantities: Small, medium and large series Dimension: Conventional machining: max. D = 220mm Material: Steel, stainless steel, nonferrous metals, plastics Surface treatment: possible in cooperation with long-standing and reliable partners Welding: Quantities: Small series Weight: Max. 3000 kg Material: Steel, stainless steel Welding Types: After method E111, TIG / 141, MIG / 131, MAG135 / 136 Welders have valid certificates according to EN 287/1 Surface treatment: possible in cooperation with long-time partners. Surface treatment: anodizing Chromium Blacking paint galvanize Wärmebechandlung: gas nitriding vacuum hardening are also possible on request quality responsibility "The customer comes back, not the product" So simple and clear aptly is our internal motto. Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by careful and constant growth of the company and by absolute customer satisfaction. Challenge us with your requests!

Mack AUTOMATION GmbH has been an owner-managed, medium-sized company in the electrical industry for over 40 years, known for innovation, top quality and punctuality. With highly qualified employees, we implement individual customer requirements in industrial automation technology, from design to production, assembly, and commissioning to service.

The ETS Stainless GmbH was founded in 1984 in Stuttgart as ETS Edelstahltechnik Stuttgart. We are a medium-sized company with 4 divisions - Stainless Steel Sheet Metal Working - Metal - Grating Manufacturing - Hot-dip galvanizing and currently employ approximately 60 employees. Our headquarters is located approximately 50 km south of Berlin.

We are a company located in Koszalin, Poland. We operate on Polish market as well as in Western European countries. We offer a wide range of services in the field of metal processing: welding, metal sheet cutting, bending, machining, painting. We provide comprehensive service at all stages of implementation. You can count on consulting in the field of technology and construction, as well as the exact implementation of even the most difficult projects (including details with a high degree of complexity and accuracy). We are ready to cooperate with You.

Polytech-lab is a center that inherits the tradition of three generations of designers and manufacturers. Our vocation is to provide the theoretical and practical tools for the conception, engineering, implementation and testing of projects ranging from precision mechanics, component technology, industrial design, to architecture and visual arts. The experience gained in the field of traditional construction techniques is combined with a continuous process of research and experimentation aimed at innovative digital design and manufacturing technologies, while an ever-expanding network of partners allows for the organic management of the complex of different phases necessary for the materialization of the project. Indeed, the laboratory provides a network of knowledge embedded in the most important manufacturing realities of the market, matured over decades of fruitful and systematic collaboration. An overall vision of the methodological and pragmatic landscape in the field of drawing and design, together with a layered knowledge of traditional and digital fabrication techniques, passing through a genuine creative flair in the formulation of strategies and the realization of the equipment necessary for the industrialization of the project, are the factors that make Polytech-lab the ideal place to develop and realize your ideas.

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products. In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

Large-scale and mass production — Bending, forming and dividing wires — Bending, punching and forming sheet metal strips — Assembly and assembly of various parts made of different materials

SD Partners Ltd. was founded in 2006 by Dipl. Eng. Hristo Dradalov who has more than 25 years of experience in the field of mechanical engineering. Our scope of work is versatile, offering a vast range of services, suited for the needs of our clients. The company is a manufacturer of machined parts and electro-mechanical assemblies. ​ We are a quick developing company with customers from whole Europe. We are aspiring for growth and success, therefore we are constantly investing in new machines, technologies and staff training to keep up with the continual thechnological evolution and customer demand.