I have been working in the metal sector for around 15 years, where I have mine Completed an apprenticeship and in 2015 the foreman for mechanical engineering & Operational engineering completed. Starting in 2020 with metal decoration, fire pillars, etc. has A lively locksmith business has developed over the last three years. The professionally equipped one is located at the parents' farm workshop, where we are constantly developing and gladly yours Accept orders. “Challenge is motivation! ”

Manufacturing without limits: turning, milling, eroding, grinding, engraving, laser marking, ... benefit from our hughe and various collection of machines on four locations. Your stock stads by us - over 4.000 materials, alu, steel, stainless steel, titanium, tec. plastic, ceramic-glass, ... We twist for you - ask for impossibilities, our sheet metal forming realizes it. The word is colorful - our longterm experience of perfect surface finishes. Quality is no accident - our optimized quality management. Save paper, time and nerves - the best quality in the right place at the right time, all from a single source. We look forward to all questions, not only to inquiries. For more than 30 years Mühlbauer AG has been a proven partner for the provision of high quality precision components. It all started with a small lathe, from that we have developed into a globally operating company, which realizes all wishes concerning precision around the globe. From consulting, construction and prototype construction via manufacturing including surface finishing up to the installation of complex single components or whole machines, we have everything you will need for an optimum result.

Experience, quality and Kontuität for over 40 years: The company has been manufacturing Schweigert 1959 progressive tools, drawing tools and simple tools for various industries. Almost as long as we also supply stamping parts to our customers - produced on presses and punching machines from 3t to 340t maximum pressing force. Of course, we also offer sub-assemblies or welding, whether as spot welding, stud welding or TIG welds. We work for many years after the Qualtätsnormen DIN AN ISO 9000 and are therefore able to provide our customers reliable to use according to his requirements. From small to large Our products range from the smallest parts for the electronics and precision engineering in the milligram range up to part weights of more than two kilograms. Flexible We adapt also the quantity requirements of our customers. In addition to large-scale production, we are also able to produce products cheaply in smaller and smallest numbers. This is made possible by a development partnership with our customers to develop optimal as possible, product-oriented solutions.

Progress Engineering and Progress Sp. z o.o. is a reputable company existing on the market for over 25 years. We have 11400m2 production space. We specialize in the automotive industry, with extensive experience and an advanced quality system. We have PN-EN ISO 3834 certificates and use quality tools such as PPAP, ISHIKAWA diagram, 8D, Pareto Lorenza, FMEA, IMDS database. We offer documentation for the approval of the production process at VDA level 2. Our PN-EN 1090 EXC-2 qualifications include the execution of welded structures. Our machine facilities include robotic welding stations, horizontal and vertical machining centers, turning machining centers, bending machines, press brakes, 2.5D, 3D a laser and powder paint shop. We cooperate with hot-dip galvanizing and galvanizing with DASt 022 certificates, which allows us to provide comprehensive service from design to finished product. Our company is ready for challenges not only in the automotive industry Our machines: 4x CNC (SAJO,MAS,OKUMA) 7x Milling Centers (MAS) 5x Turning Centers (MAS) 2x Laser Fiber 2D 1x Laser LT Combo 2.5D 2x Press Brakes 3x Hydraulic Press 10x Robots Welding (Panasonic) 1x Plastic Plotter Kimla and many more

Manufacture of stamping, drawing, deep drawing and stamping bending parts, assemblies, welded assemblies, plastic covered parts, stampings and plastic tools, special machine

We have been producing springs for three generations. For twenty years we have been dealing with the creation of springs of the most diverse types, processes studied each time on the specific needs of the customer, always united by high performance and certified quality. The rule of excellence guides us in everything: from the reactivity in proposing concrete solutions, even when specific and complex needs arise, to the rigor of our productions, whether they are single pieces or millions of units, to the human quality of collaborations, a fundamental aspect for us both within our company and with partners and suppliers. Because companies are first and foremost people.

For over 10 years design, manufacture and assemble structures, pipelines, manhole covers, stairs, etc. made of stainless steel and steel, mainly for water and sanitation activities. The stainless steel lining of potable water tanks complements the portfolio. The production range of stainless steel is carried out in a separate hall for a clear separation to ensure with ferritic steels. All products made of stainless steel will get a mechanical, chemical or electrochemical surface treatment. On request of the customer also receives bead blasted surfaces. Pipes made of stainless steels are basically "formed" and pickled in a pickling bath and passivated. Customer focus, punctuality, steady quality improvement, introduction of new products / services in our offer as well as the conservation of natural resources of our environment determine what we do. We know that qualified and motivated employees the most important resource for the successful fulfillment of our tasks. Our top business principles are customer focus and quality. All our products and services are based on these values in the design, implementation and warranty. With all our clients, customers, consultants and partners, we strive for a trusting, fairness and integrity cooperation. We are confident that our custom alignment is an important foundation to build confidence. Compliance with existing laws and regulations in the provision of our services is one of the foundations of our identity. We document to develop workplace Our employee orientation unremitting endeavor, efficiency and effectiveness. Healthy and motivated employees are a prerequisite for our competitiveness. Training and continuing education have a high priority. This is a way by which we secure the jobs of our employees. It is our belief that the provision of high quality products and / or services in the fields of steel, metal and plant quality objectives and apply quality management methods and - are measures essential.This we manifest our factory production in accordance with DIN EN ISO 3834-2.

Bade und Rinscheid is a specialist for metal processing of aluminium, steel, stainless and high-strength steel and other standard materials (Cu, Ms) Toolmaking, stamping production including surface treatment and global just-in-time delivery for your provision of Sheet metal technology for automotive control systems Heatsinks EMV shielding High tensile stainless spring steel parts Housing components and assemblies for standard- and special plugs Precision bending and deep-drawn parts for assemblies for rubber-metal or plastic-metal combining techniques Reinforcements as an inner part for vibration damper/absorber e.g. Sleeves and drawn parts for chassis frame components Axle spring plates for pivoted bogie of railway vehicles Stamped and bended parts and assemblies Brackets for automotive sensors and functional assemblies Handholds and edge protection for wooden boxes according to DIN and TLA 004 Special fittings BADE UND RINSCHEID processes coil and strip steel from 0,2 up to 8 mm thickness. Especially for the use of aluminium – but not only – the machinery and equipment have optimized functionalities. Automated stamping machines, hydraulic and eccentric presses with forces up to 3.150 MPa process coils up to a width of 600 mm. Small tolerances, high demands with regard to planeness e.g. and other sophisticated specifications are covered and as far as possible already checked during production in line. Our industrial cleaning devices – built in accordance to environmental demands make use of fluids that are CHC free. The possibilities are given for the use of degreasing processes according to VDA 19 or DIN ISO 16232 e.g.. The considerable and responsible run of processes leads to products with high quality standards. Our lean organisation assures short lead times in production and a serious focus on customer demands.

For over 25 years the name Güntner is metal technology for competence and quality and is among the leading companies in this sector in the broad catchment area of Lauingen. Doing so, our business has gone from a sole proprietorship to a medium-sized one operating in this industry. The credit to all our loyal customers, we can use the latest technology and in-depth know-how at any time. Even in the future Güntner metal technology outsell - always in the service of his satisfied customers. Services Laser cutting * On our laser cutting machine we produce for you simple and complex sheet metal parts according to your data. . * Short-term production of sample, small series and orders * From our in stock inventory, we manufacture your special parts of the following materials: steel ST37, ST52 (QSTE380), stainless steel V2A (1.4301), V4A (1.4571), aluminum (ALMG3) - Other materials on request * Sheet sizes: 1000x2000 mm, 1250x2500 mm, 1500x3000 mm and fixed formats that can be obtained quickly * Maximum sheet thickness: Steel - 25 mm, stainless steel - 20 mm;, aluminum - 12 mm * Data exchange files possible on the basis of DXF, DWG and SAT Kant technology * CNC press brake * Maximum pressing force 220 t * Maximum edge length 3050 mm * 3D programming system Machining * CNC turning, turning * CNC milling * Drilling, thread cutting Welding Surface treatment *

The company KUNZMANN is partner of mechanical engineering, packaging industry, the pharmaceutical industry and the automotive industry. We manufacture machine enclosures, sound enclosures, protection and welding devices for machines, fence systems, special constructions and sheet metal parts from steel, stainless steel and aluminum. Our strength lies in the problem solution. We advise, design on 6 3 D CAD jobs, develop, produce, powders and install. And last but not least, we mainly associate contemporary design with high-end technical concept. We have an automatic high bay warehouse with 725 rack positions á 4x2m (5,800 m²) for optimal material flow and storage with direct access to lasers, press brakes and welding to the places of manufacture. Delivery program: Machine covers, sheet metal processing, noise control cabin, sound-proof lining, machinery enclosure, laser cutting, laser cutting, laser parts, sheet metal cladding, sheet metal enclosure, sheet metal processing, guard, powder coating, powder, sheet metal protective covering, cladding, enclosure, sheet metal construction, metal trays, steel trays, steel cladding, steel enclosures, sheet metal racks, steel racks, prototypes, Blechverkapselungen, housing, equipment racks, cabinets, cabins, coverings, sheet metal cabins Industries: Engineering, mechanical engineering, apparatus engineering, automation technology, packaging industry, pharmaceutical industry Surface coating: Powder coating Materials: Processes

We look back on over 100 years of company history. Since 1911, we have grown together with you — to meet the individual requirements and needs of our customers. As early as 1950, DALEX completely converted its manufacturing program to resistance welding technology. In the 1970s, our offering was expanded into a full service: In addition to a wide range of products, technical know-how was offered for all welding tasks. DALEX impresses with consulting services, in-house development and machine design. An in-house T-Center enables testing, experimental welding, the demonstration of welding processes and welding patterns. It enables us to create improvised welding tools for the welding task and based on the component geometry and to analyse weld connections metallographically with micrographs. Service and training services complete the offer. Our goal — to inspire you in the long term through an active, solid, reliable and partnership-based business relationship — is still our corporate philosophy for the future. DALEX has trade & sales agencies worldwide. We are there for you in close proximity to our customers and provide advice in your local language. At the Wissen site alone, 140 highly qualified, mostly long-standing employees shape DALEX through their dedication, expertise and experience. In cooperation with proven, efficient suppliers and service providers, we offer product quality “Made in Germany”.

We have over 18 years of high production and materials expertise in sheet metal & tube processing. We put in innovative technology combined with the expertise of our staff of 40. We continually invest in modern production tool in the development of our employees. Modern machinery and 3D CAD-CAM systems are for us for years, of course, as well as our IT system that meets the current standard. In the processing of high-quality materials such as stainless steel and titanium, we continuously develop new manufacturing processes. Due to the technology and product portfolio, our customers see us as a full service provider and problem solver for sophisticated and custom products.

Family entrepreneur with 30 years of experience in stamping and pressing

Started in 1994 as a tool shop, the company Künzel is now available for high quality Processing of sheet metal, milling and turning parts, as well as the individual production of devices and soldering frames. We are expanding our manufacturing technology constantly to meet the increasing demands of the market to do justice.

Your partner in Stainless steel, steel and sheet metal processing, Cutting, edging, crushing profiles, and laser blanks

Prolift operates in an own manufacturing facility with production area of 1800 m² and surrounding storage area of 3000 m² located in Plovdiv, Bulgaria. We have fulfilled the requirements of ISO 9001:2008 certification from TÜV Nord for our Quality Management System and we are a long-standing member of the German-Bulgarian Chamber of Industry and Commerce (AHK). The steady investment in state-of-the-art technology and the expertise of our team enable us to offer our customers individual approach and accordingly tailored solutions in combination with attractive pricing. A substantial part of our machine park includes: Laser Cutting Machine Trumph L4030 + Liftmaster CNC Punching Machine Baykal BPM 1225 x 30 CNC Press Brake Baykal APHS 4110 x 240t CNC Hydraulic Shear Baykal HNC4100 x 10 MIG/MAG Welding Machines

Dear visitor, we are a young dynamic team based in Izmir/ Turkey. We are an engineering company with a focus on vacuum technology and special machine construction. Further, we have professional experience in automatic shelving systems. Through our local manufacturing partners, we can support you constructively and in production. We look forward to receiving your inquiries.

We offer quality CNC parts and solutions.

GKR STEEL s.r.o. is a Czech company founded in 1998, which specialises in made-to-order production of steel constructions, technological units and precise metalworking. The company has its seat in Roudnice nad Labem close to the D8 highway which guarantees good transport accessibility not only within the country itself but also within Europe. It is 50 kilometres away from Václav Havel Airport in Prague, 20 kilometres away from the freight port on the river Elbe which is further connected with rail freight transport. Czech border with Germany is 70 kilometres away. All production takes place in our own production facilities having the area of 8000 m². Thanks to our technological equipment we are able to offer the complete production process from the material procurement, its splitting, working, machining, pressing, welding, surface finish and the final assembly. We keep modernising our production tools and increase the production capacity. 80% of our production is exported. Our production capacity is approximately 250 to 350 tons of steel per month depending on the difficulty o f the construction.