Kirmell Ltd has been a trusted name in metal fabrication and precision manufacturing in the UK since 1985. With over three decades of industry experience, we are a leading provider of high-quality fabrication, presswork, CNC machining, welding, and laser cutting services. Our commitment to quality, innovation, and customer satisfaction has earned us long-standing partnerships with clients across the automotive, security, postal, and industrial sectors. At Kirmell, we pride ourselves on delivering tailored engineering solutions from complex custom components to high-volume production work. Our Birmingham-based facility is equipped with advanced machinery and staffed by a skilled team, allowing us to serve clients not only across the UK but also in international markets, including Europe, the Far East, and the Americas.

InduGrind GmbH - Your tool grinding shop from Bochum In the centre of the Ruhr area, we offer you a competent grinding service for your tools and components. With InduGrind, we are breaking new ground to support you in the machining and production of high-quality cutting tools and components. Our focus is on you as our customer, as we take your challenges seriously and our expert team is happy to present customised approaches. The solution approaches start with the discussion of the respective application, continue with the production of a tool or component drawing and end with supportive advice on the use of your tools. In addition to providing expert advice on the use of tools, we are also happy to support you with tool management and maximising sustainability. We would be happy to present our solutions to you in a personal appointment. We offer you a personal pick-up service or, if required, dispatch with various logistics partners. If you have any questions, please contact us directly!

Cramer Schleiftechnik not only grinds, modifies, repairs and coats existing cutting tools, but we also manufacture special tools according to your needs and specifications, which are not yet available on the market. By professionally regrinding, coating or repairing cutting tools, you can significantly extend the useful life of tools and thus save considerable costs. With special tools specifically tailored to your production, it is often possible to combine several work steps. In addition to cost savings, this often results in shorter production times or higher production volumes in the same time compared to several steps with standard tools. With all our services, we clearly focus on your wishes and needs and react flexibly to changes or special requirements. Precision, quality and on-time delivery are a matter of course for us in all services.

Production profile Industrial service providers and manufacturers of capital goods • Development, design, manufacture, assembly and commissioning of components or complete systems according to customer requirements • Individual solutions with exact Manufacturing accuracy • Repairs, maintenance, conversion, implementation, expansion of existing machines and systems • Industrial service • Compressed air technology / service (specialized in KAESER compressors) • item pluspartner • Arms manufacturing license Main profile • Special machines, systems, aggregates and components for the capital goods industry • Filter systems for particle filtration • Container construction • Steel construction • mech. Machining workpieces • Refurbishment and revision of drilling and construction machines • Precision machining in automatic construction down to the zero dimension range • Production of weapon parts and complete weapons • Tool making • Production of analog film production systems Services etc. • technological steel construction • Assembly services for all chemical, pharmaceutical and production engineering apparatus and plant engineering • All types of welded structures • Profile construction • Aluminum profile construction • Industrial services • Maintenance, inspection and servicing of mechanical equipment • Tool repair (grinding, sharpening) • Repair of film and photo technical systems

Sächsische Walzengravur GmbH has been producing high-quality rotary printing and embossing forms since it was founded in 1890. In addition to engravings for gravure, flexographic and screen printing, we also offer steel cores as well as a large number of technical rollers and services through our own cylinder production.

KROZMET S.C. is a Polish company based in Marcinkowo (Purda municipality, Warmian-Masurian Voivodeship), operating since 2009. The company specializes in the design and manufacturing of machines and technological solutions for industry, agriculture, and the recycling sector. Business Profile The company offers comprehensive solutions in three main segments: Krozmet Industry – production of conveyors, specialized machinery, and spare parts for industry. Krozmet Farmer – solutions for agriculture, including machines and equipment supporting production processes. Krozmet Recycling – delivery of modern sorting lines and waste processing equipment. In this segment, the company cooperates with the Dutch firm Bollegraaf Recycling Solutions, offering comprehensive recycling systems.

HOXHA & GIERSCH is an innovative company dedicated to customer satisfaction. The main focus is on quality, adherence to delivery dates and customer satisfaction. The repair of machining tools of any kind is our job and we are very good and experienced in this. Do you need a suitable tool, we will take care of it? No problem. Special tools tailored to your needs? You're welcome! Would you like to speed up your process, make one tool out of two? We will try to implement this! Prototype tools we are there for you.

Fresal is an Italian producer of solid cutting tools. With a wide range of standard tools, suche as solid carbide and HSS end mills and reamers, and solid carbide drills we can find a solution to your different needs. Half of our production is based of special tools, produced to solve your machining problems of any material and process.

Over time, our company has developed from a craft business to a modern industrial company. Starting with shiny turning and milling tools made from natural diamonds to to cutting and grinding tools made of polycrystalline diamond (PCD) and cubic boron nitride (CBN). In order to meet the high demands of industry, our machines and measurement equipment are state of the art and are subject to continuous development. Our high-precision tools are used in the automotive and aircraft industries, in the electrical and optical industries and in mechanical engineering.

The production and the repair of cutting tools of all kinds, as well as the trafficking in and the round and flat grinding of materials of all kinds

Presentation of the company We are a company with a long tradition, which produces diamond (PKD) tools, hard tools, various purpose drills, cutters, knives and dedicated holders for various standard and non-standard tiles. We also produce various tools made of CBN material, which are used for turning and milling very hard materials. Company vision With precision, precision, speed and knowledge, we overcome the set goals, which are expansion, new collaborations and, above all, satisfaction of both old and new customers.

FERMAKS Industrial Robotic Automation and Machinery Industry Trade Limited Company is excited to share over 20 years of knowledge and experience with you, our valued customers. Since its founding, our company has an expert team specializing in conveyor and handling systems and project manufacturing. Our company offers industrial robotic automation systems, conveyor and handling systems, customer-specific machinery manufacturing, service, and spare parts manufacturing. Despite being a medium-sized enterprise, the importance it places on quality and its determination to overcome challenges has quickly earned it a reputation in the industrial robotic automation systems and machinery industry, and it has never abandoned these principles. The company's unwavering principles have always been quality, service, on-time delivery, and competitive pricing. Operating on the principle that honesty and quality are the guarantee of success and continuity in production, FERMAKS thanks you for your close interest and support. We look forward to serving you today and in the future.

Tooling workshop (24 years experience) in manufacturing of cutting/punching toolings, spare parts of toolings, manufacturing of single and small batch of parts by milling/turing/grinding, engineering and manufacturing of hydraulic cilinders single/ small quantity

Your competent partner for polygons and complex components Our focus areas are the development of processing methods and machines as well as contract processing with our large modern machine park. We are a reliable partner to our customers and offer them application-specific and production-optimized solutions for their technical tasks. Since the company was founded, we have been working on the development of the ICTT non-circular turning technology, which today represents our unique selling point in the market. Our vision is to make a contribution to the conservation of resources by using optimal polygon connections. The ICTT process for polygon production is unique in the world The ICTT non-circular machining process for shafts and hubs was developed by Iprotec GmbH over many years and made ready for series production. This enables the highly economical production of almost any polygonal contours. Particular emphasis was placed on the fact that the process can be easily integrated into different machine concepts and that the process is transparent and easy to use for the user. Appropriate software tools support developers, work planners, machine operators and measurement technicians in using this unique machining technology.

Aficor is a Portuguese based company for the manufacturing of turning and milling pieces as well as woodworking and metal working cutting tools. We are an honest, credible and qualified company to answer with efficiency, speed and competitivity to the market needs. We work with partnership for our customers interests. Looking towards the future, we plan today with our expertise from the past.

Production of special tools from solid carbide, HSS, PCD or CBN Drill Milling cutter Inserts etc. ..

The TAWESCO is leading producer of tools, metals stampings, weldments mainly for the automotive industry but also trucks, agriculture and forestry machinery, mostly heavy weldments including surface treatment and welding fixtures. Key figures: • All in one solution under one roof (DESIGN – TOOLING – STAMPING – WELDING) • Turnover about 78 mil. EUR in 2019 • 950 employees • Production area about 50 000 sqm in Koprivnice near Ostrava city • Tradition since 1850 as TATRA Trucks production • Quality management: EN ISO 9001:2015, IATF 16949:2016, VDA 6.4., ISO 14001:2015, ISO 3834-2 • CAD-CAM Capaility: AutoCad, Catia V5, Autodesk Inventor, IDEAS, AutoForm Tawesco competitive advantage: "All under one roof ": stamping + welding + tooling + design Stamping: • Metal and aluminium stampings for automotive industry up to 50 kg • Mechanical, eccentric, progressive and transfer presses up to 2000 kg • Press breaks up to 8 m Welding: • Weldments for automotive - spot and laser welding • Heavy weldments for trucks, agriculture, forestry and municipal machines • Robot, automatic, semi-automatic and manual welding • 2D/3D laser cutting Tooling and design: • Welding and machining jigs up to 15 m • Tools for forming, bending and perforation of steel sheets up to 50 T • Milling centres, drilling and grinding machines • Try-out hydraulic presses 1250 T and 2500 T Quality management: EN ISO 9001, IATF 16949, VDA 6.4., ISO 14001, ISO 3834-2. References: 1. John Deere, Kemper, CLAAS, KION- Linde Material Handling, Fenwick 2. TATRA Trucks, IVECO 3. SKODA Auto, Audi, VW, Bentley, Daimler 4. GESTAMP, SNOP, TIBERINA