At five locations in Germany Herzberg am Harz Stuhr near Bremen Norderstedt near Hamburg Reinberg in Saxony Thale in the Harz Mountains, leads the group HEAT heat treatment on a broad range of technologically sophisticated products through. Clients come from the aviation and aerospace industry, the automotive industry and in mechanical engineering. Heat treatment on a large scale and important contributions to the optimization of the performance features delivers the HEAT Group for the automotive industry in the areas of: - Passenger restraint system - Diesel injection systems - Suspensions - Drive Technology

Manufacturer of precision turned parts with hardened and ground surfaces.

The vital link Operating an international network of facilities and serving a wide range of industries including aerospace, defence, automotive, power generation, oil & gas, construction, machine building, medical and transportation, Bodycote is the world’s largest and most respected provider of thermal processing services. These services are a vital part of any manufacturing process and include: - Heat Treatments - Metal Joining - Hot Isostatic Pressing - Metallic, Ceramic, Cermet and Organic Coatings Thermal processing is a vital part of any manufacturing process and includes a variety of techniques and specialist engineering processes which improve the properties of metals and alloys and extend the life of components. Without heat treatment aircraft engines would not last a single flight and car gearboxes might only last a week – if you were lucky. Without hot isostatic pressing the risk of catastrophic breakdown of metal components would be far greater and the carbon footprint of power stations would be dramatically higher. Without coatings, construction fixings would rust away and thousands of everyday objects would quickly lose their shine. Peace of mind for manufacturers for over 30 years We never forget that our customers have invested time, money and resources in all the components we process, which is why quality comes as a standard part of our service, ensuring that all our customers’ components are treated with care throughout. Our facilities hold numerous international, national and customer approvals appropriate to the services they offer and the markets they serve. Bodycote’s quality management systems, validated by major engineering OEM’s, have been developed to meet the requirements of both ISO 9001 and environmental standard ISO 14001. Additionally, market-related standards such as AS 9100 for aerospace and TS 16949 for automotive have also been incorporated. Bodycote has also gained the prestigious Nadcap accreditation at a large number of locations throughout Europe and the USA, as well as approvals from major aerospace companies and their supply chains. Additionally, our transport services are linked with process and production controls to deliver optimum logistics solutions for supply chain customers. Our customers can be confident their demands can be met, however stringent, with assured quality, cost-effectiveness and on-time completion every time.

Engineering and Machining precision is specialized in manufacturing and design of mechanical products which based on the use of CNC machine tools (8 Machining Centers, 2 CNC Lathes), as well as precision metal construction (Welding capacity: SMAW, MIG, TIG, ...), (20 welding stations Fronius), (Polishing equipment, sandblasting units, painting units, assembly units). EMP is EN9100 V2016 certified. We have a high skilled and young team able to understand and to meed the higest level of customers expectation upon all standards of manufacturing and construction (ASME, ASTM, GE standards, RR standard....) and we are able to work with all kind of material both imperial & metric. Today EMP have a good reference in flying part with AIRBUS Tier 2 and OEM (Engines) Licencies for Engine tooling & Ground Support Equipment . The main programs reference are: A380, XWB, LEAP 1A, LEAP 1B....... The excellent Geostrategic location of Tunisia allow EMP to get order from all the world and export to any country with a good lead time. The Team is around 200 Peoples most of them high Graduated with international qualifications. EMP have a perfect IT system to manage and control of all processes in real time.The Company headquarter in based in Tunis city (Near the the main Airport), we have a milling site in the same area and the construction activities is based in Sfax within 3 production sites.

Ranieri is an Italian company certified ISO9001:2015, a sub supplier specialized in the production of industrial rollers: conveyor rollers, rubber rollers and cylinders. Our partners operate in different sectors such as the paper industry, earth moving machines, agriculture, wood and other industrial machines which need rollers upon technical drawing that reach diameter Ø520mm and length 3.150mm.

Steel is our lifeblood - that's us LSV Lech-Stahl Veredelung GmbH was formed from two traditional bright steel companies in 2012. Lech-Stahl Veredelung in Oberndorf am Lech and Stahlveredelung Landsberg (SVL) have merged to form LSV Lech-Stahl Veredelung GmbH based in Landsberg am Lech. To implement new technologies, another location was built in the immediate vicinity of the parent company Lech-Stahlwerke in Meitingen in 2019. LSV Lech-Stahl Veredelung GmbH is a 100 percent subsidiary of the only steelworks in Bavaria, Lech-Stahlwerke GmbH in Meitingen. Both companies are part of the Max Aicher Foundation group. Our parent company is one of our largest suppliers of raw materials and supplies us with steel made from 100 percent recycled scrap. Due to this corporate structure, it is possible for us to fall back on the entire value chain and the associated expertise. The approximately 300 employees at the three LSV locations are committed people who are passionate about it. Decades of experience in the production of bright steel and the refinement of steel as well as the pursuit of the highest quality make it possible to realize the wishes of our customers and to establish close customer loyalty. Passion also means reliability paired with qualification. Therefore, in addition to the technically sophisticated production facilities, our employees are the basis for our success. LSV location Landsberg am Lech headquarters At the location in picturesque Landsberg am Lech, over 50,000 tons of bright steel are produced annually in a wide variety of refinement and processing stages. The focus is on the production of high-precision and ground toothed rack blanks as well as inductive single bar tempering. In addition, there are all classic bright steel processes at the highest level. LSV location Oberndorf am Lech The tranquil Oberndorf am Lech in the Donau-Ries region is the location of a completely modernized and expanded company with a capacity of over 80.000 tons per year. A high-tech bright steel production also forms the basis for the further refinement of the products. Short piece production and tempering systems at the highest technical level enable deeper added value in the production chain. The youngest LSV location in Meitingen Our third production site in Meitingen has been in operation since 2019. In addition to an outdoor warehouse and central warehouse of the parent company Lech-Stahlwerke, we produce steel in different processing and processing stages on almost 10,000 square meters in two aisles. In addition to the most modern production lines, the youngest LSV location has a motivated and flexible team that draws on the many years of experience of the other two locations.

h2> Success- now and in the future /h2> Through continuous development over the past 75 years, Charles Scharrenbroich GmbH & Co. KG has grown into a high-tech oriented company. Since then, this name stands for the production of high-precision and precision cut parts and components for axles, steering, transmission and aggregates of various kinds of high quality. Our customers include well-known European manufacturer and supplier of automobiles, vehicles, transmissions and engines.

Manufacturer of series turned parts from all cut materials according to your specifications. In addition to being a reliable supplier, our major passion is the development of optimum solutions.

Since its inception in 1999 we have specialized in the manufacture of parts and series in the area of turning and milling, and are active throughout Europe. Regular investment in new technologies and manufacturing capabilities ensure optimal quality and customer satisfaction. Good Quality begins with a high-quality production equipment, efficient processes and a clear structure. Continuous development is the foundation of our success. We employ 35 employees in administration, construction and manufacturing. Join our 4 trainees for precision mechanics and in administration. The cooperation with TME is open, direct and uncomplicated. Our clients include companies in the areas of: Engineering, tooling, laser technology, and aerospace and automotive industries. Service overview Production / manufacture of components We manufacture parts, spare parts and small series to mass production according to your drawings or a pattern. Our machining capabilities include CNC-controlled milling, drilling, turning, wire EDM, surface grinding and conventional crafts and sheet metal processing. We can use our processing centers, parts machining, up to the size: L = about 2100, W= about 1000 B =, H = about 600 and up to a weight of 6500 lbs. Construction Design of tools, fixtures and equipment. 3D modeling for prototyping. Support for design tasks and advice on cost-effective and production-oriented manufacturing of your parts during development. CAD / CAM Acquisition and processing of all popular file formats such as : STEP, SAT, IGES, DWG and DXF programming with our CAM system. Welding / Heat treatment The welding of steel and heat treatment (hardening, tempering and annealing) are also of parts of the scope of our processing. Surface treatment Surface treatments, we can perform at our partner companies. Assembly Assembly of parts, components, tools and equipment. Reports On request, we create initial sample inspection reports and test protocols. Delivery We deliver your products on time with shipping or parcel service. We are a professional partner, trust TME!

Manufacture of precision machined parts and milling parts from all machinable materials. CNC turning (up to D 90 mm rod) CNC turning (up to 250 mm in the feed) CNC long turning CNC multi-spindle turning (32 axes) CNC Machining Centers (5-Axis) Batch sizes up to 1000 pieces .... Piece including all subsequent operations up to the assembly In the field of machining there are many different ways of working. One is the CNC machining. Through this method, the milled parts get even complicated 3D contours. The CNC machining is done with machines with up to 8 axes. CNC turned parts can be made of different materials. For machining titanium, copper, brass, plastic, aluminum, stainless steel and other materials are suitable. Rotating parts in general can assume unusual shapes. In particular, the CNC milled parts often see pretty spectacular. Through its 3D contours CNC turned parts have a special effect.The machining is extremely versatile. Machining technology is used in various fields. Lathe parts, especially CNC lathe parts, are very expensive to manufacture. To produce a CNC lathe part, one special machines and more time than the normal CNC turned parts needed. The machining and especially the CNC machining requires a good education in the field. The partially very complex turned parts and just the CNC lathe parts require a tremendous expertise. A single CNC lathe part caused enormous amount of time. For these special turned parts, a particularly accurate work is absolutely necessary. For the purposes of machining are all chip forming materials. Depending on the material, the cutting is performed with different speeds. Are the turned parts made of wood, the cutting is done with high cutting speed and without cooling lubricants.Turned parts made of plastics, however, are processed at medium cutting speed. When machining water or alcohol are used for cooling. A special product from the metal cutting machines is the rotating part. Such automatic turned parts can be made from almost all machinable materials. Just like the CNC long turning parts of the screw-cutting without technical knowledge can not be produced. All machined parts require special machinery for the production. Rotating parts are to be finished by hand hardly. Are the turned parts made of wood or plastic, the machining is possibly still done manually, but with harder materials the use of expensive machining is necessary. To establish automatic turned parts, can not be dispensed with the machines. Automatic turned parts are usually ordered in enormous quantities and from extremely strong materials. Also for CNC turned parts is similar. This machining is simply too specific. CNC turned parts requiring extreme precision. Turned parts of this type are mainly used in machine and plant engineering. These industries would not do without CNC turned parts, turned parts, and the entire range of machining technology. Milling Services, CNC turned parts, turned parts, and just such special products as a CNC lathe part are absolute precision products. As simple as the concept sounds cutting, this process but it is not. Cutting sounds like simple separation that hide behind it but also things like complex CNC turned parts or automatic turned parts, no one thinks at first. Without these highly intricate parts, especially without the screw-cutting work would be impossible in some areas.

Our mission is to provide first-class services in the field of CNC machining. Thanks to our passion for technological progress and continuous improvement of production processes, we are able to meet even the most demanding requirements of our customers. Our customers demand not only high quality and precision, but also flexibility and the ability to quickly respond to changes in production requirements. We are proud to be able to offer comprehensive services from technology design through production to final quality control. Our customers particularly appreciate our professionalism, technological equipment and ability to meet even the strictest deadlines. We have a production capacity of 400 hours per week, which enables us to efficiently respond to the demands of our clients. Our 960 m² production facilities are equipped with the latest machines and technologies that ensure high precision and product quality. Our customers include : Siemens s.r.o., Flowserve s.r.o. John Crane Škoda Transportation a.s. DPOV a.s. Excalibur army spol. s.r.o. Company Technology : Metalworking - CNC turning , CNC milling , CNC measuring , conventional turning and milling. Cutting work on CNC plotter. 3D printing. Production of hydraulic hoses - industrial hoses, air hoses, rubber and flooring + accessories. MIG/MAG and TIG welding. Locksmith works. We also provide : - Heat treatment of metals (hardening, annealing..) - Casting (cast iron, steel, aluminium) - Forgings, forgings... - Surface treatment (comaxite, zinc, etc..) - Grinding Translated with www.DeepL.com/Translator (free version)

Please allow me to introduce our company. We are a Slovak company whose major production program is orientated to manufacturing of special and precise parts for machines, different kind of fixtures, stamping tools, dies/progressive tools and transfer tools. We are a member of Rejlek Plastics Group in Vienna, Austria. We offer you capacities and experience in design and production. Our production is for the customers who are different tools and machine producers, special machine builders working in the automotive industry, electrotechnical and furniture industry and in automatization of industrial manufacturing. If you are interested in cooperation with our company, do not hesitate to call us. Yours sincerelly Viena International Slovakia

LEIKO SA, founded in 1962, is an innovative SME that manufactures your individual parts and small series with a lot of power and passion for perfection. The fascination lies in the diversity of our work and the quest for the highest quality — down to the smallest detail. If you're looking for a complete solution for your design, you've come to the right place. We specialize in the production of complex precise components, instruments, assemblies as well as in general tool and device manufacturing. In addition to extensive technical experience, you benefit from the absolutely discreet handling of the manufacturing principles and information provided to us. Thanks to our highly qualified and flexible employees, we are also able to fulfill express orders on time. We are proud to offer excellent customer service, convinced of the importance of a successful business relationship in our specialized industrial segment.

metal cutting technology, Steel, stainless-, brass turning, milling, grinding, inductive hardening, assembling

Reseda d.o.o. is an innovative and modern company with a vision, rich experience, tradition and clear goals, which are related primarily to quality products and services, and the related satisfaction of our customers and partners, which are crucial for our activity and development. With our headquarters in Nova vas near Markovci, we strive to work for the benefit of the local and wider environment, so that we can be focused on the best results, and we are distinguished by many years of experience and numerous references. Our main activities include CNC metal machining, production and highly complex assembly of metal products, construction, 3D modelling and planning of production processes in the metal industry. We provide our clients fast response times, experience and high flexibility, to find the most appropriate solution for them. Our business partners and customers come from worldwide companies that are leaders in their fields and operate on a global scale. We provide our clients fast response times, experience and high flexibility, to find the most appropriate solution for them. Our business partners and customers come from worldwide companies that are leaders in their fields and operate on a global scale. We offer them fast response times, experience and high flexibility to find the most suitable solution for them.

With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment. Our mission We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products. We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.

Rope clamps for chair lifts and cable cars, T-bar lifts Components for cable car construction, drive technology Camshafts, rocker arms, finger followers Shift forks Clutch baskets Precision parts for mechanical engineering Steel and aluminum snap hooks Belt buckles Drop forged parts machined Peening machine

Welcome to the world of precision parts We are pleased that we can imagine in this way with you a powerful supplier of CNC turned parts, CNC milling parts, bending parts, the complete CNC sheet metal and especially the mechanical assembly. In the area of our assembly often diverse precision parts, such as aluminum machined parts, plastic machining parts, wire parts, laser cutting of stainless steel and metal stampings used to complete some complex mechanical + electro-mechanical assemblies. This in turn requires an extensive technology park ahead of puts us in a position to open up a very broad range of cutting and non-cutting metal and plastic processing, such as the manufacture of precision aluminum milling parts, brass turned parts, turned parts and laser blanks. This will open up with just a central partner considerable parts and technology spectrum in the field of precision parts. Although we sometimes are merely a supplier of CNC machined parts, CNC turning parts or bending parts, our tasks go beyond the mere delivery of structural parts by far. We are often a development partner for stamping parts, the CNC sheet metal and aluminum milled parts and also possess expertise in materials and technology experience. As a result, we are rather a QUALITY and COST OPTIMIZER. Customer satisfaction is our ultimate goal. Therefore, we are a value-added partner that ensures this requirement through comprehensive services, innovative technologies and reliable communication. This in turn leads to positive effects in the areas of cost reduction, security of supply and increase productivity. We are happy to provide you with reference products such as aluminum milled parts, brass turned parts, plastic machining parts and turned parts from our prior production and develop according to your requirements, for example, complex precision turning parts, stamping bending parts, wire parts or CNC turned parts.