Since 1985, the family-run company Zepf GmbH manufactures for the turned parts industry and other industries. In the meantime, work 12 employees with the latest technology in the company in Frittlingen. Always with the goal in mind, the demanding requirements of the partners in terms of quality and reliability not only strictly observed, but to exceed them. Invest in your product and give you turned parts in experienced hands. Our focus is on high-precision ground parts or workpieces with deep hole drilling.

Service provider in the field of grinding and hard turning with automation Specially free capacity in centerless plunge grinding on Ghiringhelli machines

OMGM is a group of companies founded in 1972 near Bologna: the company specializes primarily in machining (turning and milling) but also in machine assembly.

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

Your expert for complicated components and very critical applications • Beutter is a supplier of fine mechanical components with a high production depth in small batch series. • Beutter was founded in 1909, and is located in Baden-Württemberg, very close to the A81 motorway, 60km south of Stuttgart. • We have about 125 employees. Of our production staff, over 90 % are skilled workers. • We have the capability to perform, in-house, all machining processes (turning, milling, grinding, honing), while for special processes and surface and heat treatment processes we use competent third-party suppliers. • For us, the ideal is small- to medium-sized production runs with a lot size of between 20 and 1,000 pieces. • Beutter is particularly capable within the manufacturing of components with close production tolerances. • We process all machinable materials, and are particularly experienced in processing high-alloyed steels (stainless steel, V2A, V4A, 1.4441, 17-4PH), titanium and special materials (inconel, hasteloy, Ni-base alloy, chromium molybdenum steel, tantalum, platinum-iridium, PEEK). • Our main fields of activity are: Medical technology, aeronautics, hydraulics, military engineering, mechanical engineering and measuring equipment technology. • Our quality management system is certified according to DIN EN ISO 9001:2008, DIN EN 13485 (medical products) and DIN EN ISO 9100 (aeronautics). • We can process your data via our CAD system “SolidWorks“.

We are an innovative company has been established specialised in the sector of precision parts for machine construction. Customer orientation, quality, respectful labour relations. We are specialised in turning, milling, and grinding processes of mechanical parts.

Private company, with young team, offering wide range of services providing construction and assembly works of steel products including final surface treatments based on Customer drawings.

Please allow me to introduce our company. We are a Slovak company whose major production program is orientated to manufacturing of special and precise parts for machines, different kind of fixtures, stamping tools, dies/progressive tools and transfer tools. We are a member of Rejlek Plastics Group in Vienna, Austria. We offer you capacities and experience in design and production. Our production is for the customers who are different tools and machine producers, special machine builders working in the automotive industry, electrotechnical and furniture industry and in automatization of industrial manufacturing. If you are interested in cooperation with our company, do not hesitate to call us. Yours sincerelly Viena International Slovakia

metal cutting technology, Steel, stainless-, brass turning, milling, grinding, inductive hardening, assembling

With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment. Our mission We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products. We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.

Complex turned and milled parts, perfect service Using the latest CNC machines, impressive vertical integration and various further processing steps, we produce almost all workpieces ready for dispatch on site. In this way, you get products up to the complete assembly from a single source. We are also happy to purchase the necessary parts for you.

Johann B. Waas GmbH has been a production company for metal and plastic components and assemblies for the automotive, medical technology and general mechanical engineering industries since 1967. Specializing in complex turned and turned-milled parts, we manufacture on state-of-the-art CNC machines in small and medium series according to the current standards of our industry and the automotive industry as a Tier 3 supplier.

Welcome to the world of precision parts We are pleased that we can imagine in this way with you a powerful supplier of CNC turned parts, CNC milling parts, bending parts, the complete CNC sheet metal and especially the mechanical assembly. In the area of our assembly often diverse precision parts, such as aluminum machined parts, plastic machining parts, wire parts, laser cutting of stainless steel and metal stampings used to complete some complex mechanical + electro-mechanical assemblies. This in turn requires an extensive technology park ahead of puts us in a position to open up a very broad range of cutting and non-cutting metal and plastic processing, such as the manufacture of precision aluminum milling parts, brass turned parts, turned parts and laser blanks. This will open up with just a central partner considerable parts and technology spectrum in the field of precision parts. Although we sometimes are merely a supplier of CNC machined parts, CNC turning parts or bending parts, our tasks go beyond the mere delivery of structural parts by far. We are often a development partner for stamping parts, the CNC sheet metal and aluminum milled parts and also possess expertise in materials and technology experience. As a result, we are rather a QUALITY and COST OPTIMIZER. Customer satisfaction is our ultimate goal. Therefore, we are a value-added partner that ensures this requirement through comprehensive services, innovative technologies and reliable communication. This in turn leads to positive effects in the areas of cost reduction, security of supply and increase productivity. We are happy to provide you with reference products such as aluminum milled parts, brass turned parts, plastic machining parts and turned parts from our prior production and develop according to your requirements, for example, complex precision turning parts, stamping bending parts, wire parts or CNC turned parts.

Since 1984, the company socrima specializes in manufacturing custom parts and customer specifications. Socrima provides optimized, reliable and responsive solutions for your machining small and medium series of parts in all materials and in a wide range of dimensions. Socrima can meet your needs: Traditional turning, CNC Lathe CNC milling, CNC turning, CNC Machining Center, CNC punching, CNC bending, Silver solder, Solder, Plating localized "buffer" buffer tinning, silver pad. Socrima supports operations related to machining, surface treatment (plating, tin plating, nickel plating, epoxy paint, etc ..., annealing heat treatment, etc ...). Socrima supports the assembly of subassemblies from machined by us and / or provided by you parts. Since 1984 Socrima works for the electromechanical sector, it manufactures custom parts and customer specification for the transport and distribution of electrical energy average low and high voltage.

We offer you solutions in high precision turning and milling technologies on Techpilot. Our meticulous approach to our clients and our order processing at each stage of cooperation - from analysis of customer needs to the final product - is what makes us stand out from the rest. Our affiliation to Mangata holding and the company's development over the years created the opportunity for modern machinery and equipment, expanding staff competencies and adjustment to marked needs. Our innovated technical facilities and richly equipped measurement laboratory and numerically controlled devices reduce our production cost. We specialize in the production of complex, precision elements with complex design, without any shortcuts. Our quality is confirmed with our numerous certificates and implementation of projects with our Polish and foreign customers. We manufacture, among other things, parts for vacuum pumps, compressors, brake systems, hydraulic pumps, vehicle suspension components, car seat components and servomotors. We are happy to support the medical industry by becoming suppliers to the medical industry.

We are a specialized company in the field of machining technology. Our production area covers all metals and plastics up to special materials such as Hastelloy, Monel or Titan. We see ourselves as a complete supplier to our customers including coatings, special operations and service in the area of special packaging, logistics or just-in-time processing. Our own claim is quality at the highest level, if you don't believe this, you can convince yourself of it on site. My TEAM and I look forward to your inquiries and hope to be a reliable partner for the future.

Fischer-Brodbeck GmbH (FIBRO) was founded in Weinsberg in 1958 and has been part of the LÄPPLE Group since 1974. Today, 610 employees worldwide work in the standard parts division. FIBRO at a glance: - 610 employees - own subsidiaries in France, Poland, the USA, India, Malaysia, Korea and China - Over 70 agencies and service centres worldwide - Quality management system according to DIN ISO 9001 - Environmental management system according to DIN EN ISO 14001

Our company is a 68-year-old company and with its expert team and qualified product selection, we offer our customers and the companies that choose us the opportunity to work together by prioritizing quality. Our company video https://youtu.be/iOXV0C5f_v8?si=kLx2VGLXe1QAvMev

PREFAG has been located in Walzbachtal for more than 65 years. We are a strong partner as a supplier in sectors such as industry, medicine, aviation and automotive. Our qualified expert team actively supports customers and suppliers in the development of new components and assemblies. The complex and miniaturized turned parts up to ø30 mm are our core competence. We have innovative strategies and a high level of vertical integration in the manufacture of short and long turned parts - including further processing, eg heat and surface treatments.