With more than 200 engineers, technicians, masters and qualified technical specialists in the team, Dr. Hager the business of MainTech Systems. The high status of the industrial location testifies to a decades-long tradition: The location was founded in 1924 as a production facility for textile viscose yarns of the Vereinigte Glanzstoff-Fabriken AG. In 1938, the production of technical viscose yarns began, which were mainly used as a reinforcing material in the carcass of car tires. In the 1950s, fiber production was expanded to include synthetic yarns such as polyester and polyamide. Since the 70s and 80s of the 20th century, the location has increasingly developed into the most important European production facility for high-quality yarns for technical applications due to the expansion of capacities. For many decades the location in the Bavarian Lower Main was the largest employer in the region. As a result, the ICO is of central importance for the structural and economic development of the entire area to this day. In its almost 90-year history, when the parent company changed its name - from Glanzstoff to Enka, Akzo Nobel, Acordis - the name of the location also changed until 2003, when the neutral name “Industrie Center Obernburg” was chosen. The background to the last change was the split up of the previous business areas of the Acordis Group and their separate sale. The former group branches located in the ICO were converted into legally independent GmbHs. The site operating company of the ICO is "Mainsite GmbH & Co. KG", which offers all the infrastructural services required for a technological production site. In 2010, the technical services of Mainsite GmbH & Co. KG were spun off into the independently operating subsidiary Mainsite Technologies GmbH. Due to its technical competence, this company has developed into an innovative plant construction company as well as a service and maintenance company.

We are a company of cutting industry and manufacture and install ready for use precision parts made of light metals, plastics and stainless steel in small and medium series on CNC machining centers, to 5-axis machining (5-sided machining). Examples of our products include: linear bearing housing, scopes, Hdraulikzylinder, pneumatic cylinders, valve strips, evaporator, base plates, jaw inserts, tandem housing, Quadro case, tripod, camera case, camera cover, base, seal carrier, lens wearers, filling adapters and many more. New in our production range is the machining of workpieces made of magnesium. The production machines used by us (Hermle C30, Hermle C800) naturally meet current technical standards and are designed for the manufacture and assembly of light metal precision parts in small and medium series (Please also refer to our machine data below). For many years, we supply our customers with precision the highest quality products in the areas of: Linear Technology / Automation / Optical Industry / Pneumatic / hydraulic / vacuum technology / Automotive / general mechanical engineering

We are a successful medium-sized company with about 30 employees, weches was founded in 1960 as a family business. Activities we include in Sondermachinenbau, contract manufacturing, mold manufacturing, steel, welding, sheet metal forming, CNC laser cutting, CNC flame cutting, CNC turning and CNC milling. The high degree of vertical allows our customers to be manufactured economically and quickly from the industry, the craft industry, agriculture, construction, as well as come from the private sector, their products and developments. Special machine / steel construction Our strength is the manufacture of plant components, special constructions and machines. We produce unique pieces, prototypes, assemblies, small series according to customer or assist in the development of new products. Welding MAG, TIG and MMA Manufacturer Qualifications DIN 18800-7 class B CNC flame vaginal • CNC laser cutting up to t = 15 mm • CNC flame sheaths to t = 100 mm • CNC plasma cutting (under water cutting)

The SPL Precision Manufacturing Ltd. manufactures high-precision parts for industry. Special emphasis is on the production of components for main spindles of machine tools. When turning, milling, drilling and grinding of shafts (with HSK, SK or short taper), housings, cooling sleeves and end shields are modern CNC machines, such as the "C30U" Hermle AG for the 5-axis milling and the "KEL- VIVA "from Kellenberger for the external and internal cylindrical grinding to use.

Our company was founded in 2011 as an R&D branch of LLC “Nasostechkomplect”. Together with main company, we have 15 years of experience in design and production of high quality flexible and gear couplings with diameter up to 410 mm for Ukraine and Russia market. Some of our flexible couplings are successfully working on Zaporizhia and Kursk nuclear power plants. Moving further, from 2014 year we have made a strategy to enter to European market with our products and services, giving possibility to our customers to take an advantage of our reliability, high quality and reasonable prices. Now we wide our activity to automatization of various proceses in mechanical manucaturing and food industries. Our team can make complex projets of automated production line with various level of automatization, iincluding loading/unloading, conveyors, mixing boxes, packeging. We advantageously combine mechanics and electonics in our products. Now we can also offer machinig of metal an plastic parts by - Turning; - Hard turning; - Milling; - 4.5x milling; - Assembling of apparatus by welding, bending etc.

Company founded in 2011. 4 CNC Lathe machining up to 20mm diameter. Equipped with high frequency milling up to 60'000 rpm. High pressure pumps 150 bars. Specialised in complicated parts and exotic materials.

We are a produktions company with complex solutions covering CAD design, machining, assembly, electric works and programming for special machines. We are continuously developing our factory with the newest technologies to offer our customers the best possible quality, with a correct price and precise delivery dates. We are ready to support our customers with an experienced enginneer team and CNC technicans. Our monthly capacity is about 1000 hours in CAD and 2500 hours for machining and metalwork.

Make AG - quality that arrives. For over 60 years, we have confirmed ourselves as a provider of Swiss precision mechanics. We manufacture quality products to measure and according to standard, with different materials and coatings. Thanks to our own developments, the latest technology and great technical experience, our products meet the highest customer and quality standards.

Short portrait of Fa. Judge Richter Founded in 2002. Range of services includes CNC milling and turning. We also have the latest CAD / CAM technologies, to perform processing up to 3D freeform surfaces. Our customers are active in the most varied fields. Medical engineering tool construction, mechanical engineering, research and Development as well as in rail vehicle construction. CAD / CAM Import of CAD data (STEP, IGS, DXF, DWG, SAT, VDA) Production of individual pieces and series production sample production profile processing

SCHÖMA - In the team we develop traction! Founded in 1930, SCHÖMA - Christoph Schöttler Maschinenfabrik GmbH - is a manufacturer of rail vehicles and specializes in the development and production of customized, individual transport solutions. Especially in tunneling, SCHÖMA locomotives are used in almost every well-known underground construction project worldwide. Shunting and factory locomotives for in-plant transport in the raw material-producing industry as well as service and maintenance vehicles and special locomotives for use in amusement parks are also included in the scope of delivery of SCHÖMA. On the basis of an economical modular system, SCHÖMA offers its customers a large variety of equipment and variants. Our designers develop individual technical solutions for a wide variety of rail transport problems. With the delivery of a locomotive the job is not done for us. Our fitters take over the commissioning of the locomotives and the briefing on site For decades we guarantee a secure worldwide spare parts supply. In addition to the technical individual transport solutions, we offer corresponding economically customized solutions that relate not only to the individual payment and delivery conditions but also financing and rental of locomotives. For tunnel construction projects, we will take back the locomotives after completion of the projects on attractive terms on request. Quality comes from qualified employees who judge and act on their own responsibility. Our work processes are organized transparently, responsibilities clearly regulated. The quality management system has been successfully certified according to the regulations of DIN EN ISO 9001: 2008. Our company is certified according to DIN EN 15085-2 for the welding of rail vehicles and vehicle parts. SCHÖMA product range Our strength lies in the development and production of locomotives and rail vehicles in customer-specific design, even for the smallest quantities up to lot size one. Underground and tunnel locomotives For tunnel gradients up to approx. 7%, we have developed a special drive system that ensures the necessary traction even under poor track conditions. Factory and work locomotives For such applications we develop shunting locomotives up to approx. 80 t weight and 700 kW engine power in all worldwide standard gauges. Our references cover steel and building material companies as well as the chemical industry. Special rail vehicles For special transport requirements, we offer locomotives, which are usually required in small quantities for special purposes. These are tourist railways and amusement parks as well as working and light rail locomotives, which are mainly needed for narrow gauge rail networks.

Medium-sized enterprises Specialized in professional sheet metal working - Laser sheet blanks - Blechabkantantungen - Mechanical machining

Meccanica Oriente Srl is a precision mechanical workshop that has been operating in the sector for over 50 years. The main activity consists in the construction of mechanical parts related to industrial plants and machinery. The company specializes in mechanical processing for third parties, special equipment and automation systems for industries. The strengths are the use of advanced machinery and the long experience of a highly qualified staff.

Franke Industries is the leading expert in the production of hot gas components for the energy and aviation industries. Sustainable partnerships with market leaders enable us to maintain our capacity to supply components for the latest turbines and engines. Franke Industries is a member of the Artemis Group. It is based in Aarburg, Switzerland, and Ampfing, Germany, and currently employs around 140 people with net sales of CHF 32 million in 2019.

Whether we saw or mill - our solutions are always precisely tailored to the customer's requirements. For AMCO it is a challenge and a passion at the same time to produce custom-made work at the highest level deliver. Whether standard formats or custom-made products, individual pieces or series production - we sawing and milling always with the greatest precision. The basis for efficient manufacturing is the trend-setting technology of our ultra-modern machine park. Our CAD / CAM-supported production works according to your construction data in DXF or 3D format. In addition, we mill aluminum precision plates for you in any desired thickness according to your specifications from rolled and cast material.

Individual, small series and custom-made stainless steel turned parts We have modern machinery at our disposal for individual, small series and special production of stainless steel turned parts in diameter ranges from 5 to 1400 mm. CNC lathes 2x turning diameter 550 mm x 1500 mm turning length 1x turning diameter 650 mm x 1500 mm turning length 1x turning diameter 830 mm x 1500 mm turning length 1x turning diameter 1450 mm x 1700 mm turning length CNC vertical machining centers 1x 1100mm x 650mm x 600mm 1x 1600mm x 850mm x 700mm Conventional lathes 1x turning diameter 670 mm 1x turning diameter 1000 mm Benefit from our high quality standard through modern machinery. Adherence to deadlines and speed are a matter of course for us. Do you have any questions? We are always at your disposal for further information.

The Hohenroth workshop for disabled people (WfbM) manufactures precision parts made of plastic, ferrous and non-ferrous metal for the automotive and electrical industries, mechanical engineering and medical technology. We have a versatile and modern machine park that leaves nothing to be desired by our customers. We are certified according to the ISO 9001 industry standard. Our high quality standard is ensured by CNC machines, suitable measuring equipment, measuring computers and qualified specialists.

As a service provider, Ausperger Präzisionstechnik specializes in the production of individual and series parts according to customer requirements. medical technology tooling semiconductor industry aerospace Maschinebau Prototype manufacturing science and research automotive development

New Standard is a trusted Ukrainian metal processing company specializing in high-precision CNC machining, offering a full turnkey service—from design to production of complex parts. With advanced milling, turning, and grinding machines, we ensure consistent quality and precision. We serve industries like automotive, aerospace, medical devices, electronics, defense, energy, construction, consumer goods and robotics, delivering tailored solutions with reliable supply chains despite regional challenges. With hundreds of completed orders, we guarantee quality, precision, and dependable partnerships. Visit us at new-standart.com.ua.

CME is a referenced highly specialized mechanical engineering in turning and milling CNC performed at the customer's design. Quickly, accurate, organized the CME is a reliable partner for small and medium range and also for the production of single components. We perform acts assembly jigs and welding, construction of automation in customer design and small welds. We work all kinds of steel, the various variants of aluminum, plastics, and still bronze, copper and brass.