Production of prototype to large series parts as well as construction, planning and implementation of special machines and devices of all kinds. We are also, with great personal enthusiasm, active in many areas of motorsport, from supporting regional motorcycle manufacturers to Formula 1.

The company Jakob Schäfer was in Kaiserslautern, Mühlstr in 1926. 9 of machinist - champion Jacob Schaefer founded. Mr. Jacob Schaefer worked in the tool room Pfaff , where he took his master's certificate in 1919. First founded Mr. Shepherd has entered the bicycle mechanic Guild, and worked as a guild master. It then bicycles and motorcycles were sold and repaired. Before the second World War II was furnished a cylinder grinding and turning shop. 1944 destroyed a bomb attack the entire operation including residential house and a shop. After the war, Mr. Schaefer from the ruins of an emergency shelter built with a small workshop. Companies - with the currency reform, the structure of today's "Shepherd" began. House and workshop were created again. In parallel with the vehicle sales and the turning shop was built, so that in 1950 the first jacks, the Federal Railroad Central Office, could be sold in Speyer at the time. The two operating branches vehicle and turned parts production had increased to 1955 so that the existing business premises were no longer sufficient. Therefore, in 1955 the purchase of a hitherto community-owned 10,000 square meters of grounds with a building of 300 square meters floor area and 200 sqm floor. The turning shop was moved to Weilerbach and managed separately from the vehicle sale as KG. As a complementary acted Mr. Jacob Schaefer, limited partners were Mr. and Mrs. Hedy Werner Hilbrath Hilbrath. Since 01.01.2001 is also Jutta scouring manager and responsible for business administration and the personnel office. As of 01.01.1982 the sole proprietorship was changed into a limited liability company. Managing partner was initially Dipl.-Ing. Werner Hilbrath. Since 01.01.1995 Mr. Mechanical engineer Rüdiger scouring held this position. Shareholders are Elke Palm, born Hilbrath and Mrs. Jutta Scheuer, bornHilbrath. In 1990 the office building was enlarged by 100 square meters. After the construction of an additional hall in 1998 the operation are around 2,500 square meters of covered factory area available. Currently, the annual turnover of 4.5 million euros at an average of 45 employees. The GL is based on German quality and the production does not outsource to neighboring countries. The rest of the year, the company under the slogan "Quality ensures the future"

Mesa Parts is a leading development and production partner for high-quality precision turned parts and turned part-based assemblies for internationally active technology companies. The technology company Mesa Parts, with locations in Lenzkirch (D), Nachod (CZ) and Lerma (MX), produces and develops customer-specific turned parts and assemblies to meet the highest demands. In doing so, we focus on holistic solutions, sustainability, flexibility and continuous improvement. Our core competencies go far beyond those of a typical turned parts manufacturer. Mesa Parts combines production and engineering expertise, develops stable process chains, offers customer-focused project management and international presence.

The company Heinz Zenker GmbbH specializes in sheet metal processing and manufacturing of individual parts, prototypes, small series to mass production from coil everything. Since we also have a own tool design and manufacture all our tools themselves, it helps us naturally to queries of any kind to respond quickly and deliver. We have a full plate range, press brakes, CNC milling machines, CNC machining centers, laser (stainless steel up to 12mm, steel up to 15mm), a 3D laser also part of the scope, various presses, punching nipple machines, EDM machines, CNC lathes, and of course beyond the normal mechanical machines. In addition, our particular strengths include a highly qualified team sweat. We weld steel, stainless steel, manganese, copper, aluminum. In addition, we are contract coating for diamond-like carbon hard coatings (type: aC: H: X) and we would like to introduce as a supplier to your company. The program includes: wear-resistant coating, corrosion protection coating, overlays, numerous design layers and modified layers with combined properties (multi-layer coating), all based on diamond-like carbon films (type: aC: H: X). As an example of the multi-layer layer to be mentioned is our latest development, this has been modified specifically for applications in injection molding. It combines high temperature resistance with consistent wear protection and maximum corrosion resistance (as chemically inert) with a unique anti-stick effect and very low friction coefficient. All this at a very attractive appearance. Possible locations we recommend: ejector, extruders, torpedoes, sprue channels, cavities, etc. ..

CNC turned parts and milled parts for mechanical engineering for mechanical engineering

Since 1996 we work for you with a pioneering spirit, because we give with our achievements not satisfied, but to look for continuous improvement. Did you know us at that time as a machining company of machine parts made of steel, so we finished today in the HSC only parts made of aluminum, plastics and composite materials such as fiberglass, CFRP, packaging materials, composites, foam, mineral and timber materials, etc. to X6000mm Y2000mm Z250mm .

Our company, TMG Maschinenbau GmbH was founded in 1987 and produces today with about 40 professionals individual engineering systems of the highest quality. Design, manufacture, assemble and after-sales service. We are able to offer an all round service from a single source. Reliable, to provide consistent and high quality products was and is our greatest concern. Through our experience and our knowledge about the use of laser cutting technology and CNC machining, we are able to deliver high quality at competitive prices. Here, we have always a special concern to ensure maximum flexibility. Both different high numbers as well as smaller quantities can be produced quickly and reliably. Our powerful head and bending machines also bring solutions from a single source and complete our contract manufacturing program. Translation by Google Translate

We are DIN EN ISO 9001: 2008 and DIN EN 15085-2 CL4! Our company, the Herzsprung turned parts or AFT Manufacturing Technology and Trading GmbH, manufactures of all common and commercially available materials on CNC lathes and machining centers precision parts for: Engineering / Sonderanlagenbau Automotive / motorcycle technology Plants and wind power technology Medical Electrical refrigeration technology Stainless steel fittings u. Special for the food industry Machining of cast blanks (aluminum, steel u. Cast iron) Facade and Fasteners (Special dowels for facade assembly) Our highly qualified employees put our know-how to the most modern machines in our products. We manufacture according to customer drawings and / or samples. We also offer a wide variety of finishes of surfaces and premium payment method. Our offer is complemented by wage saws, Module assembly and packaging. You are looking for a service provider who accepts competent and high quality production of your components? With us you are at the right address. Our ultimate goal is to help you always to pass only the best products. Our strict quality management makes this possible. We are DIN EN ISO 9001: 2008 and DIN EN 15085-2 CL4! Translation by Google Translate

Composite Point Shop - Your Point For Composites The Composite Point team is passionate about providing you with the right material at the best price at the right time. The product is as individual as your requirements Do you have a special request or an unusual idea? We will help you with the implementation. Regardless of whether you only need carbon plates and tubes cut to size, or whether you need special dimensions and unusual shapes, we will take care of your request. Using our CNC milling and waterjet cutting systems, or Waterjet for short, we shape CFRP plates and pipes up to maximum dimensions of 3000 x 2000 mm.

Milling and turning operations 80% Export to Austria and Germany

steel construction Contract manufacturing & CNC sheet metal processing

Founded in 2008, it supplies plastic and / or metal parts for prototypes and / or small series made with rapid prototyping technologies: SLS, SLA, FDM, PolyJet Multimaterial, MJF, Vacuum Casting, Injection Molding & Molds, CNC.

We are your strong partner when it comes to hydraulics, pneumatics and project planning! From planning and design to production and assembly of hydraulic and pneumatic systems and components: with us, you have a competent specialist at your side! For pipes and hoses, you've come to the right place. long-standing PARKER dealer We produce low-pressure, medium-pressure and high-pressure hose lines for you in our workshop. A large number of different fittings and fittings are available from stock, so that you can immediately take your assembled hose line with you. Benefit from our fast hose repair service with the Parker Tracking System™ (PTS). This enables us to ensure that all hose lines are permanently unmistakable and produce identical replacement lines within a very short period of time, so that the hoses no longer have to be removed before replacement. Your benefits are longer machine operating times and improved predictability of revisions, modifications or in the event of repairs. You will also never miss the due dates and intervals for replacement periods and intervals again (every 6 years for hose lines!) Our factory also manufactures pipes (special pipeline construction), as well as valve blocks and cylinders according to your specifications/drawings. Thanks to our broad manufacturing base, we can also produce spare parts for older machines and systems that are no longer available on the spare parts market. Regardless of whether it's a small quantity or a series: WE MAKE IT POSSIBLE!

At Dr. TRETTER Machine Elements we see ourselves as specialists and finders of solutions in regard to linear technology and smart shaft-hub connections. As manufacturer, importer and technology partner we offer you a vast portfolio.

Our customers value us as a reliable and versatile partner. We are also happy to take on major challenges and support your project or production part with a great deal of know-how, as well as a high level of quality and cost awareness. We provide you with precisely machined components in turned, milled or cut to size. On request, we carry out preliminary work such as chamfering, planing or deliver semi-finished products in the form of round bars, plates or tubes. In addition to ready-to-install machined components, which we produce for you using all common manufacturing processes, we offer a wide range of semi-finished plastic products. If required, we deliver plates, rods and tubes* either ready to manufacture or with the desired pre-processing such as sawing, planing (up to 4 sides simultaneously), profiling, chamfering, etc. Thanks to our decades of experience, we are the right partner for almost every task in the plastics sector.

As a reliable partner, we offer you laser welding (2D/3D/ manual laser welding), laser cutting and sheet forming of various materials and sheet thicknesses from a single source. Our range of services is supplemented by conventional welding and various surface treatment options.

We say: Technology, quality and innovation - all together! And, above all, the enthusiasm with which our employees manufacture all products so that we can meet your high demands for turned and milled parts and assemblies. The success story of METUSAN TURNING GmbH began in Vienna in 1906. The Dvorak family company builds on a wealth of experience - after all, we have been Austria's largest producer in the field of non-ferrous metal processing for many years. Perfect industrialization knowledge combined with modern production technologies lead to the highest precision. Translated with DeepL.com (free version)

We are a metal processing company and produce turned and milled parts for a wide range of industries For many years, we have been manufacturing small and medium-sized series turned, milled and machined parts from machinable non-ferrous metals and steels. We produce bar turned parts with high standards in a process-reliable, fully automated and therefore cost-effective way for you. Regardless of whether you need a pure turned part or complex parts: We have the right machine equipment and also the appropriate know-how. Our parts are used • in plumbing and building technology • in measurement and control technology • in pump construction • in mechanical and apparatus engineering • in electrical engineering • in heating and air-conditioning technology • in gas and water technology • in vehicle construction

We are engaged in CNC processing on modern 5-axis CNC machining centers We are one of the top companies in the region We are a stable Czech company founded in 2010 in the immediate vicinity of Olomouc. Our goal is to be a reliable partner in CNC processing.