The company Koenig is a newly established, modern décor companies in the CNC manufacturing. With high quality CNC machine tools and qualified employees, we realize your precision manufacturing at competitive prices! We guarantee flexibility and adherence with high quality. You will find us right in the center of Rathenow, the city of optics, about 60 km west of Berlin

mechanical machining share of. area turning, milling, boring, cylindrical grinding and flat grinding length up to 5000 mm and max. workpiece weight 10 tons.

Since 1925, we have acquired a solid experience that allows us today to master the technique of cutting in small and medium series. The industrial evolution, development factor, requires to be competitive. The policy of our company TURNING CENTRE depends on the motivation and professionalism of the men who compose it. Every day we have the desire to ensure our customers the respect of the desired quality, time requested and expected price. The TURNING CENTRE, is also: > A dynamic investment policy > Constant monitoring of technological developments > Qualified personnel > A training strategy adapted to the technical requirements

We are a young, owner-managed company with headquarter in Wil / ZH. In addition to our engineering department, we manufacture standard and custom made products primarily for fine chemical, pharmaceutical, biotech, food and medical sectors. Our competent employees have many years of experience and know-how in precise and complex production of components and products that guarantees prompt, continuous, open and relevant interaction between customers and our specialists. Our in-house engineering department supports our customers in the areas of functionality, production optimization, selection of materials and surface quality.

HddsMachining has originated from the development of the prototype department of HddSurgery company, with a goal to offer our clients designing services, prototype development solutions and final product manufacturing using high-end software and hardware.

Karman Muhendislik was established in 2016 in Istanbul - Turkey as a manufacturer of spare parts for hydraulic cylinders and other machinery. We serve in 2400 square meters of workshop with various machining types.

For more than 50 years, ALFRED TRONSER GMBH has specialized in the design and manufacture of variable capacitors for professional electronics. Today TRONSER offers the world's largest selection of Trimmer Capacitors high quality. Have this experience, combined with fully equipped research, development and measurement equipment up to 6 GHz, CAD / CAM for the design of components and production machinery, in-house production of parts on CNC machines, own electroplating as well as tool and fixture us the preferred partner made the world's major electronics companies, when it comes to trimmer capacitors. The plant near Stuttgart employs approximately 100 employees and the subsidiary TRONSER, INC.. in the state of New York, USA approximately 20 Since almost all components are produced in our company, the focus can be more and more on the quality control, starting with an incoming control of raw materials, statistical process control during production to complete final inspection of each capacitor produced. The order processing as well as production planning is controlled by the latest computer technology. As a medium-sized family business operated TRONSER customers in more than 45 countries with high-quality trimmer capacitors, reasonable prices, short delivery time and good service.

Your flexible partner for CNC milling As a medium-sized company with highly qualified staff, we supply well-known engineering companies with CNC milled parts made of various materials such as aluminum, steel and stainless steel for years. Especially in the field of aluminum machining creates our technical equipment the best conditions for particularly high economic efficiency. Take advantage of our opportunities

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

The company was founded in 1986 in ASEDO Dombühl We employ 120 highly motivated employees, mainly metal and electrical workers in two shifts. Our key business principles are: Use of resources by qualified and motivated employees for the benefit of our customers, as well as to our company The business concept is based on independent, responsible employees who get involved with fun at work and maintain a partnership, human interaction with each To maintain and expand through their own goal-oriented training and education continuity and quality Their top-quality products to manufacture. To achieve this, we pay attention since time immemorial in all areas on the consistent implementation of this principle. This supports our existing since 1995 certification in Quality Management, since 2001 according to DIN EN ISO 9001-2000

Gutekunst connecting parts GmbH is your specialist for standard parts and custom parts. In almost all materials we manufacture from small to large, from simple to complex. By default, we process all common plastics, steel and nonferrous metals. By an appropriate stockpiling we can respond to our customers' requests in individual cases quickly.

Main activities: production and assembly of machine parts based on drawings. As a main contractor the company is ready to undertake production from pattern making to delivery of finished products. rough machining and finish machining of castings (unalloyed and alloyed steel; GG20-GG30 and GGG40-GGG70, from 5 kg to 5.000 kg) manufacturing and assembling small size steel constructions We are specialised in production of large-size pieces, in small series. Our main products: pump bodies, power frames, crankcases, gearboxes, bearing caps, covers, connecting rods, cross heads, machine beds, components for machine tools and compressors.

h3> Contract Manufacturing /h3> Our employees in the manufacturing operation are exclusively genuine and well-trained professionals, they are thus the high standards of quality, reliability and flexibility grown. In our mechanical workshop both functional models and prototypes as well as items and small to medium production runs are manufactured from drawings, sketches or verbal information quickly, flexibly, precisely, we are set up projects for the following work..: CNC milling CNC turning Cylindrical grinding Surface grinding etc. In addition, our employees perform repairs and inspections of machine tools, and special machines, eg also from our NORM Surface Grinding Machine. Complete manufacturing of special tools, jigs and fixtures and assemblies and assemblies of general mechanical engineering with increased requirements complement the activity area.Of course, we wish still the best NORM Surface Grinding ago. Take advantage of these benefits. Whether express part or complete machine: Try us, we are ready! The main editing options, please see our machines directory.

We deal with machining on numerical machines. The company's main specialty is cnc turning and cnc milling. We work with recipients from all over Europe.

Engineering and Machining precision is specialized in manufacturing and design of mechanical products which based on the use of CNC machine tools (8 Machining Centers, 2 CNC Lathes), as well as precision metal construction (Welding capacity: SMAW, MIG, TIG, ...), (20 welding stations Fronius), (Polishing equipment, sandblasting units, painting units, assembly units). EMP is EN9100 V2016 certified. We have a high skilled and young team able to understand and to meed the higest level of customers expectation upon all standards of manufacturing and construction (ASME, ASTM, GE standards, RR standard....) and we are able to work with all kind of material both imperial & metric. Today EMP have a good reference in flying part with AIRBUS Tier 2 and OEM (Engines) Licencies for Engine tooling & Ground Support Equipment . The main programs reference are: A380, XWB, LEAP 1A, LEAP 1B....... The excellent Geostrategic location of Tunisia allow EMP to get order from all the world and export to any country with a good lead time. The Team is around 200 Peoples most of them high Graduated with international qualifications. EMP have a perfect IT system to manage and control of all processes in real time.The Company headquarter in based in Tunis city (Near the the main Airport), we have a milling site in the same area and the construction activities is based in Sfax within 3 production sites.

to see Wep

.