WHEN WE CUT FROM GOOD! Water jet cutting industry meets In principle, rectangles, circles, ellipses, curved paths (eg, holes, flanges, cutouts, perforated sheets, letters, pipe cuttings, etc.) are produced each geometry of flat and slightly curved surfaces so. The maximum cutting accuracy of our method is: Accuracies: + / - 0.1 mm Water is forced under a pressure of about 4000 bar through a nozzle of 0.2 mm. The water admixed abrasive ensures a "grinding out" the kerf of 1 mm or less. This Mikrozerspanungsprozess hardest materials to be cut. A CNC controlled water jet cutting machine enables cutting of any form of flat plates. Water jet cutting meets craftsmanship With the water jet, almost all materials from aluminum, stainless steel, porcelain tile, ceramic tile, granite, copper, brass, titanium, steel, stone, and non-ferrous metal, glass, ceramic, plastic and composite materials to natural materials such as wood, cork, and Edit rubber without problems. The water jet can simultaneously edit multiple layers of materials. - No deformation due to delay in heating - No burn-off at the cut edges - No hardening in the kerf by temperature - No tempering colors on steel - Clean cut edges with aluminum, brass, copper, etc. - The finest contours with extremely thin bars (tool width 0.8 mm) - Very true to size, so no rework required - Economical even for single parts and small series

About Water Jet The Waterjet Group has over 25 years experience in the field of water jet cutting technology. Water Jet Sweden AB is the leading manufacturer of waterjet cutting machines. By working closely with the equipment manufacturer, Waterjet SWEDEN AB, we are constantly on the cutting edge of technology. Our powerful, innovative contract-cutting company was founded in May 1999, is headquartered in Neustadt on the Wine Route, just off the A 65 We have successfully taken on the task to act as a competent and supra-regional service provider for industrial and craft. We work with our qualified personnel in the 2-3 shift operation and offer our customers: good price-performance ratio strict adherence to deadlines Quality awareness what makes us a certified supplier to the aviation and aerospace industry. We work on: Stainless steel, aluminum, high alloy steels, titanium, Hastelloy, copper, bronze, special materials, etc., up to 200 mm thickness. Films, gaskets, rubbers, foams, composite materials, carbon fiber, textiles, in parallel with up to 6 cutting heads. Through our modern CAD, programming and CNC systems and our efficient machinery, we are capable of economic production to ensure the item to the series part. We have a well-stocked warehouse. We are happy to demonstrate to you our performance in our wage cutting center.

h3> Precision metal - Made in Germany /h3> Diversity, competence and safety in the manufacture of parts, fittings, assemblies and machines. h5> Performance & Service /h5> As a manufacturer of valves and assemblies from individual manufacturing of course belongs to the final assembly, the complete supply of spare parts to our service. Apply in our modern production we u.ä addition to all common VA materials, special materials like Hastelloy, titanium, nickel, Monel, tantalum, Zinkonium Suppliers, wage and contract manufacturing to processing centers of the highest quality. From individual parts to series production. Turning, milling, drilling, grinding and surface processing according to customer specifications.

Our key competences are gearing, CNC turning and milling of steel-, aluminium- and copper alloys, as well as numerous cast alloys, drop forging, welding up to the manufacturing of special drives, couplings and machine components. We deliver as well single components and modules according to the drawing of the customer, as well as drive- and machine-elements ready for installation. We manufacture in ISO 16949 / ISO 9001 certified factories customer related for many industries such as: • Machine – and plant engineering • Drive technology/ gear manufacturing • Vehicle construction/automotive • Agricultural machinery/hydraulics • Production of steel, cement, petrochemicals and energy

We are your competent partner in the area of machining. In modern CNC turning centers we produce parts made of steel, tool steel, stainless steel, brass, aluminum and POM. We supply well-known manufacturers in the automotive, aerospace, furniture, medicine, optics and modeling industry. We manufacture high precision turned parts and grinding parts and document it as desired with initial sample and in the series with process control charts. We specialize in centerless grinding. When hardened parts we achieve surface finish accuracies of Rz 0.6. We are certified according to DIN EN ISO 9001/2008 Their products comes complete with us from one source, including all surface treatments. A self-development is our stop for collet chuck 173 E. This stop is for collets 173E to adjust a length x. The stopper is made of VA. Enormous change Rüstkostenersparnis by rapid and adjust the stop. Very accurate machining length possible.

Manufacturing and trading of turned parts and other goods which were manufactured by machining. It will work on all steels, non-ferrous metals as well as plastics. Stainless steels are standard. Long and short turned parts up to diam. 50 mm from the rod. Smaller parts can be barrel finished with us. Blacking up to 1000 mm length parts in wage labor.

MVS supplies mechanical customized components for the followings sectors: - Torches and other components for cutting and welding equipment - Taps and valves for drinking water - Fluid control and measurement (valves) - Fittings for pneumatic - Components for high pressure washing machins

Welcome to the exon GmbH Your partner in the areas of: Laser cutting Plasma cutting Sheet metal working Industrial Coating Baugruppenfertigung Welding Mounting Business Using the latest technology and innovative cutting solutions we provide to our customers high quality and reliable services you can not provide themselves because of their corporate structure. Here, our editing program ranges across all materials, because thanks to the latest laser technology we are able to not only process almost all metals but also materials such as plastic, wood, or quartz able. In metalworking our processing spectrum ranges far beyond mere laser cutting out. Thanks to powerful interconnected companies and partners we are able to offer you a full service in metalworking, which goes beyond the mere Processing for assembly, painting and final assembly. We work according to the motto "miracle we do immediately! For the impossible, we need a few days!"

The Herbert Hänchen GmbH & Co. KG is a modern medium-sized company with years of experience in design and production of special purpose machines. We provide not catalog products, but exactly what you need. Our production structure is designed so that we can realize for you unique pieces and small series. We are happy to take over the development and design for your individual machine element or customize according to your drawing. Production of precision parts: - Bars, shafts, tubes - Guiding elements and sealing systems - Fasteners More product portfolio: - H-CFRP components made of carbon - Hydraulic cylinders - Clamping units - Pressure intensifier - Complete hydraulic drive systems

Who we are We at Scilla Meccanica have been melting, casting, and machining mechanical components made of bronze, brass, and aluminum ever since the early 80s. The comprehensive, yet highly flexible approach we adopted in the light of and in order to best cater to our customers�� needs allows for quick response times, high quality, and unparalleled cost-effectiveness. Our two separate production departments and 70 highly skilled craftsmen and technicians manufacture full and hollow shell-cast parts 24-7 (the hollows being the result of sand core insertion or centrifugal casting), and machine shell as well as continuous-cast components. Besides being UNI EN ISO 9001:2008 certified, we have two separate quality assurance departments specializing in chemical and dimensional checks, respectively. Our foundry Our foundry delivers bronze, brass, and aluminum parts such as: - Bronze bearings and bushings - Strips - Plates, clips, and rails - Cages for bearings - Rings, crowns, and flanges all of which ranging in size from 10 all the way to 2000 mm and intended for applications such as industrial, naval, and construction site machinery, mining equipment, steel plants, and hydraulic monitors and taps. Our nimbly organized, high-capacity production departments enable us to quickly deliver one-of-a-kind pieces as well as large-scale batches. Mechanical processing In order to ensure high-end quality in all processes, we equipped our mechanical processing department with a wide array of tools including CNC machines, machining centers, milling machines, traditional horizontal and vertical lathes, and EDM machines. Our chemistry lab Equipped as it is with quantometers and durometers for destructive and non-destructive tests, our laboratory performs highly accurate in-process as well as post-melting checks to ensure our alloys meet the highest possible standards. Our metrology lab To ensure full compliance with customer specifications, all finished, drawing-based mechanical parts undergo painstaking start-up as well as end-stage inspections. Besides, all taps and hydraulic monitors are also pressure-tested.

MEVACO being a member of the Athens stock exchange is a leading manufacturing firm which implements state-of-the-art technology in the field of metal fabrication and metal construction, conforming to the principle that total customer satisfaction is of highest priority. When it comes to sheet metal fabrication processes, whether carbon steel, stainless steel or aluminum, MEVACO, having experience in the field for over 40 years strives to be the industry leader. Our customers depend on us to produce high quality and high precision custom products. Our staff of highly trained and engineers and technicians are flexible and highly motivated. Our state-of-the-art metal fabrication equipment and sophisticated manufacturing technologies coupled with an abundant industrial floor space enable us to fabricate almost any type and size of metal product, strictly based on the customers quality and quantity requirements. Mevaco not only invests in fabrication technologies and machinery but firmly believes our success stems from the philosophy of personnel investment. Our self-motivated experienced and energetic staff adjusts to almost any degree of difficulty and can yield desired results within a minimum response time. We make the best use of leading edge computerized hardware and software and our staff is constantly trained and up to date with emerging technologies within the field. We can fabricate to almost any order quantity and to any quality level as desired by the customer. We keep our equipment up-to-date and our staff trained and highly-motivated and content, this we believe is what sets Mevaco as a leader in metal fabrication and metal construction.

Welcome to our company page! We are a small family business that deals with many activities. We manufacture steel platforms, welded constructions, roofs, railings, handrails, steel components, stainless steel (predominantly 1.4301) and aluminum alloys. In addition, with our machine park, we are also able to carry out small series as well as single part production in turning and milling work. Recently, we have been accompanied by a flame cutting machine, with the help of which we can also produce thicker plates independently and at short notice. Laser and bending work are no problem for us and our neighboring companies, which means that sheet metal working is also possible. We are also happy to take over 3D CAD work and can thus offer you an all-inclusive package. :) If you have questions about our company or our further activities, do not hesitate and write or call us. Greetings from the company Schmid! "Do it!"

IPPM is a company specialized in the production of plastic injection moulds, founded in 2002. The company has been manufacturing moulds for the automotive, medical, pharmaceutical, electronics, household and packaging industries. With a large accumulated experience in mind, the company offers customers the credibility needed to make moulds for the general industry and in particular for cars, especially optics, consoles, wires, guides, buttons and other elements inherent to the modelling of plastic parts, as well as bi-component parts. IPPM performs Thin Thickness, Unscrewing, 2 and 3 component Moulds, Multi-Cavity, for Rubber, for Semi-solid metal casting and for Plastic Injection in general. We also provide Grinding, Technical Mould Adjustment, Assembly and Tuning, Repair and Maintenance, Parts and Electrodes Machining, Parts Erosion, 3D Modelling, 2D Programming and Drawing.

We are Slovak metal processing factory deal with laser cutting of pipes, profiles and sheets, at the customer's request. We also provide laser cutting services on materials supplied directly from customers or we can use materials from our stock, or we can buy them for you. We are providing also MIG welding and robotic MIG welding. We would be delighted if we could make you an offer based on your inquiry Theese days we also started laser-beam welding with 3kw laser source.

Welcome to Erdel Engineering Your partner for concept development, design and manufacture of mechanical components and assemblies.

Fries Maschinen- und Anlagenbau GmbH is a medium-sized company with over 40 years of experience in metal processing and contract manufacturing. We specialize in sophisticated welded and steel structures in accordance with DIN EN ISO 1090 EXC2, precise CNC machining, industrial painting and the assembly of components and complete systems. As a reliable supplier, we offer tailor-made manufacturing solutions for mechanical engineering, energy, environmental and packaging technology as well as other industrial sectors. Our manufacturing depth enables a high degree of flexibility — from individual parts to series and ready-to-install system components. Our modern machinery, certified quality assurance and a dedicated team guarantee maximum precision and punctuality. We see ourselves as equal partners — with short response times, technical advice and a clear focus on customer requirements. Overview of the range of services: Welded assemblies up to EXC2 in accordance with DIN EN ISO 1090 CNC turning and milling (individual and series production) Painting & surface treatment Complete assembly of components Material processing: steel, stainless steel, aluminum 3D model and drawing processing according to customer specifications We look forward to your request and to working with you as partners!

We are an automatic turning company that has been operating in Northern Italy for more than 70 years. We deal with the mass production (50-50,000 pcs) of turned/milled bar items in all the main metal materials available on the market. We machine automatic steels, alloyed and non-alloyed steels, stainless steels, brass alloys, aluminum alloys, PH steels, Duplex and super Duplex steels, Inconel and Titanium and copper alloys. We have 14 Star CNC Sliding Head lathes up to Ø32 and 8 Nakamura Tome and Biglia fixed heads up to Ø90. We can add heat and surface treatments to our processes.

Gera Makina is a Turkey-based manufacturer specialized in large-scale welded and machined metal parts for the machinery, construction, and energy industries. With over 5,000 m² of production space, we offer CNC milling (up to 10,000 mm), heavy welding, surface treatment, painting, and CMM inspection. Our manufacturing capabilities include 7 bridge-type CNC machines (3+2 axis), welding stations with manipulators, powder coating and wet painting booths, as well as sandblasting and laser welding systems. We also operate a new 2,000 m² advanced sheet metal facility (VISION), equipped with a fully automated LVD PX-1530 turret punch, high-precision LVD Easy-Form press brakes, and a robotic powder coating line. This facility allows for 24/7 high-volume punching, bending, and finishing operations. Gera is certified to ISO 9001:2015, EN ISO 3834-2, and EN 1090 EXC3 standards and provides full measurement reports. We serve global OEMs with high-precision components, custom-built assemblies, and turnkey manufacturing services.