Equipped with advanced CNC machining equipment, the company produces turned parts, milled parts and welded parts both in small series and one-off items. Products: There are manufactured with a diameter up to 800 mm and a length of 1,500 mm and milled parts and welding parts with a length up to 3,200 mm turning parts. About Partners also turned parts can be offered with a diameter up to 1,500 mm. Materials: We process steel, alloy steel, hardened steel, tempered steel, stainless steel, Nimonic, cast iron, cast steel, and nonferrous metals such as copper, brass and aluminum. Scope of services: Complete manufacturing of all parts, including material procurement, welding construction, machining, heat treatment and surface treatment Range of parts: among other things, bearing housing, gear housing, headstock, frame wall, side panel, base plate, cover, bar, console, support, frame, frame, socket, ring, shaft, bolt, flange Quality assurance: Each item will be tested and measured. For this an adequate CNC measuring technology.

Tool and die Manufacturing of stamping drawing parts of all kinds Production of fine cutting and plastic parts. Production of metal / plastic composite parts. Assembly of components. Powder coating

We are a family business that specializes in services for craft and industry focusing on consulting and implementation of steel and metal solutions. The company will be in April 1997 in Gladbeck by Hartwig and Wolfgang Jaszkowiak Lepping as J & L Industrial Services GmbH (metal-processing operation and Locksmith) gegründet.Die company premises (garage with courtyard) comprise approximately 150 square meters; starts with an employee. In April 1998, it is the first expansion of the production area to 500 square meters with a move to Bottroper road. The company has four employees at this time. The conventional machines are now primarily lathe converted to CNC machines. The second extension takes place about a year later by the purchase of an extensive 4500 sqm premises on the Luxembourg road. The production area is now 1,000 square meters, and the company now employs six people. In June 1999, the operation is due to the increased Kundennach- demand and to attract new customers again in both the manufacturing transfer surface and in the number of employees to its current size he- weitert.Heute is a production area of 1800 square meters. The number of employees on 24 August 2004 gestiegen.Im is a change in the company structure; Wolfgang Lepping leaving the company, and by the introduction of Andreas Jaszkowiak is the now renamed Engineering GmbH Jaszkowiak operation to a pure family

The majors activities of the enterprise are cold pressing of parts, equipment manufacturing, mechanical processing of the products (turning, milling, electro-contact welding, turning with automations and technical processing) and galvanic coating (coating with zinc, nickel, chrome, copper, oxidizing and electrochemical polishing).

Your ball specialist .... KGM manufactures and supplies precision balls made of different materials for various fields of application. Besides balls of steel (eg low-alloy, roller bearing, stainless steels) are among those from non-ferrous metals, aluminum, plastics, glass, ceramics and carbide also part of our product range. We also finished flattened balls, balls with holes as well as derivatives of balls or components. Please contact us.

Benefit from our years of experience and a professional approach. Cutting Trepte has specialized in the production of high quality and above all unique products. Convince yourself of our dedicated team and our proven range. Our advantages at a glance High Quality Short-term production Single production Series production

Scherer - Your partner in cutting technology and engineering. Our company is certified according to ISO 9001: 2008 and covers the use of different processing machines and modern technology, the entire spectrum of mechanical engineering from editing. Since our foundation in 1991, our 20-strong, dedicated team provides high quality services in the realization vielzähliger innovations. How can our company respond to customer needs more quickly and flexibly through the use of modern organizational systems.

Universal Laser Systems has been advancing the application of modern CO2 laser technology since 1988. R&D efforts have resulted in numerous patents, with several pending, in our continual pursuit to develop and enhance laser systems that benefit the customer. Our R&D philosophy and execution is based upon designing highly modular platforms that can be easily configured with interchangeable laser power cartridges and field upgradeable system options. This robust system configuration capability, unique to Universal, gives customers the flexibility and investment protection to optimize laser systems as their business evolves. Our solely owned, custom-built, state-of-the-art engineering and manufacturing facilities are located in Scottsdale, Arizona, where we manufacture both lasers and laser systems. Additional operating offices are located in Vienna, Austria and Yokohama, Japan to assist Universal Laser Systems customers and distributors. The Universal Laser Systems Global Factory Authorized Service network is on call around the globe for local system installation, service and maintenance. Our Applications Lab, dedicated to the continual advancement of laser material processing, has developed unique solutions for thousands of customers. Universal’s passion for servicing customers has culminated in the industry’s most comprehensive product line of laser engraving, marking, graphic imaging and cutting systems. As the leading provider of CO2 laser technology solutions, there is a Universal laser system installed in every country in the world with customers ranging from small, family-run operations to highly automated Global 2000 companies. Each customer shares a common thread – our systems help them make money and create additional business opportunities. Whether you are a start-up company or an established business, we have the technology, people and experience necessary to help you develop and maintain a competitive advantage. No other company has a more comprehensive portfolio of R&D, systems, global service and material processing experience in CO2laser equipment than Universal Laser Systems.

Engineering, parts production, production of Kuplungen for cars and trucks, production for technical documentation, 3D drawings, 3D modelieren, CNC manufacturing

Manufacturing company Botos LTD was founded in late 1996 as a small Family business with 3 employees and over 20 years of success we have developed into a manufacturing company with 20 highly qualified employees of 3 programmers and 16 operators. Botos LTD specialize in small and medium series of milling parts 3 axe and 5 axe, mold making, mechanical parts, casting molds and all kind of different requests for prototyping that we got and finish for our customers for low cost and HI efficiency. OUR CAPABILETES: Milling Horizontal-Vertical 1000x600x600mm 5 axe 3D Milling and Forming 700x400x350mm Spindle-8000rpm 5 axe 3D Milling and Forming 500x350x350mm Spindle-12000rpm Lathes Diameter 600x1000mm length of part Plazma cutting 2000x3500mm-200mm deep cut Press 400x400x600mm max 200t BOTOS LTD strives with our customers to a long term partnership and long lasting business. Our company has a permanent staff with 20 years of machine manufacturing experience and hi end expertise which we gain over the years of manufacturing to different customers domestic and foreigner from EU countries. We export always on time to all of our European partners with no delays and no excuse. To secure your business with us we can sing a mutual contact on terms and condition of our service and delivery terms. We always strive to secure customers confidence and insurance in our production with sing legit contract. QUALITY, REALIABILITY, FLEXIBILITY AND LOWCOST are strict lines of our success for our high satisfied customers.

ZHUP KaMECH is a company operating in the machining market for 25 years. Our services such as production on automatic turning machines, CNC milling, or CNC turning apply to a variety of metals and plastics. The crew consists of qualified constructors, technologists and toolmakers with many years of experience. We have a wide range of machinery at our disposal, which we are systematically modernizing. As part of the applied technologies, we use certified materials of proven manufacturers. We are a supplier of reputable domestic and foreign companies. The cooperation results in a comprehensive production experience.

We are actually a metal construction company and this is where we focus. We run a small sawmill that cuts the raw material. Through the sawmill, we also have contacts with chippers here in the region, for example CNC turning and milling. We also maintain good contacts with a laser company that can cut steel and stainless steel. In the steel sector we also have contacts with flame cutting. If you have found something in this network, simply register.

We are FORMFREY We spray until you glow with happiness. We are professionals when it comes to surface treatment: Material-friendly cleaning (sandblasting, dry ice blasting, chemical stripping) coating with industrial paints or powder coating Highly polished surface We spray on or off everything for you - from sandblasting, industrial painting to powder coating. We offer you a comprehensive service to make you shine with happiness again.

Started in 2022 as a small engineering service provider, RiSo also manufactures special machines in the field of suction technology with hydraulics, pneumatics and control technology. Thanks to our partner network, we are not only able to offer special machines and welded constructions, but also large quantities of precision steel tubes as well as stamped, bent, laser and milled parts. Pre-assembly, component assembly, extended workbench - anything is possible!

The company Sander Maschinenbau GmbH & Co. KG since 1848 operates very successfully in the metalworking industry and has expanded its range continuously. We offer extensive possibilities of conventional machining and assembly CNC machining to problem solving in special machines and tooling. Our options range in CNC milling up to dimensions of 12000 mm x 3300 mm x 1500 mm and a mass of 64 t. When CNC turning with driven tools, we offer a working range up to 500 mm x 1000 mm, and on turning we can to diameter 820 mm x 4000 mm machine workpieces. We can manufacture welded constructions up to 10 tons unit weight. Our welding certificate according to DIN 18800-7:2002-09, class C is constantly renewed. Through the use of Tebis 3-D and 2.5-D CAD / CAM software, we are able to customize your order very quickly and accurately from your-supplied CAD data. We provide our highly qualified staff, modern equipment and our vast experience available and support you, according to your wishes, in the development of practical and cost-optimized structures. Today we have a team of 30 employees, including two apprentices for precision mechanics / mechanical engineering. Contract Manufacturing * Guide vane of a gas turbine * Housing with non-planar subdivision * Complete machining of a compressor housing * Machining of turbine housing * Welded construction with inclined surfaces * Segments for thrust bearings with ball-Ø280mm * Turbine half shell * Machine housing * Spherical Plain Bearings * Tools for sheet metal processing * Axle beam Special machine * Machining and partial assembly of a wind machine. * Form-cleaning machine * Bucket for elimination of fines in the gravel and sand processing. * Traverse crane with 65 t capacity. * Interior and exterior formwork for precast concrete transformer station. * Conveyor belt for the Rohkiesgewinnung, * Stack machine * Transportable container in stainless steel with agitator. * Annex to the surface coating of concrete blocks in the run. * Automatic color filter system for spraying of concrete products in the run. * Machine for producing glossy paper bags. Key words: large-volume items, large items, large parts production, large parts manufacturing

TAMIDEC is a company of screw-machining with more than 30 years experiences. Our manufacturing capacity are from 0.9 to 65 mm Manufacturing on every types of materials as: stainless steel, bronze, brass, ceramic, plastic, hard steels, titanium, aluminum, alloy high temperature, superalloys, cast iron, composites, inconel, magnesium, etc. Specialist manufacturing of precious metals. Assembly by any processes of welding ( laser - tig mig - resistance - brazing). Of course, we could engrave en mark all your pieces by laser ISO 90011 - ISO 13485

JPREIS was founded 20 years ago. It is present in the areas of industrial maintenance, metalworks and metal construction. We invest in the quality of our work, seeking to provide our customers with an excellent service, based on technical knowledge and experience in the different sectors of operation. Over the past few years a significant investment has been made in infrastructure and productive equipment. We invest in the training and specialization of our employees. In 2018 an engineering office was created to offer our customers innovative solutions. This department has specialists from different areas, namely; Welding engineering; Mechanical engineering.

Antras GmbH was founded in 2005 by Manfred Abele. We are a growing, medium-sized, owner-managed company in the Ostalb district with around 50 employees. We offer tailor-made solutions for your individual requirements! Our key competencies are: Plant / mechanical engineering, crane technology and supporting structures, load handling devices and machining technology. Our customers include nationally and internationally renowned companies from the paper industry, general mechanical engineering and the foundry industry.