Gear manufacturer from Poland – cylindrical, bevel gears, spiral bevel gears, hypoid gears, worm gear drives, gear units, gearboxes, differentials, final drives, synchronizers, synchromesh gearbox parts, custom gear manufacturing, gearing solutions, gear wheels, gear shafts, spline shafts, planetary epicyclic gears and pinions, internal gears, gear couplings, gearbox input shafts, gearbox mainshafts, gearbox output shafts, gearbox gearing, transmission gears, gear parts supplier, wheel reduction gears, gear pumps, non-circular gears, cycloidal drives, ring and pinions, spider gears, synchronizing rings.

The "SPN Swabia precision Fritz Hopf GmbH" is a reliable and innovative partner for the solution of drive problems. More than 90 years ago we started with the production of toothed elements. This resulted in an extensive range of gearboxes, drive systems and drive technology components developed. In two plants at the site Nördlingen on a total of 13,500 m² production area of more than 300 employees manufacture products of the SPN.

Spring-loaded rotary encoder mounting bracket DHAF 8580 You know the application of these measuring units from your DIY store. When you buy a carpet, the metres you have to pay for are measured automatically while unrolling the carpet. The measurement is done by a measuring wheel which moves synchronously on the carpet and shows the number of metres removed from the roll on a small display. In the industrial sector, where high precision is required, this is realised by using high-precision measuring systems. ABP-Antriebstechnik manufactures and supplies the appropriate components. Our new inhouse-produced spring-loaded rotary encoder mounting bracket DHAF completes the product range of rotary encoder accessories of ABP-Antriebstechnik. After successful introduction of the measuring wheels with 500 mm circumference in 2012, only one thing was still missing: an appropriate mounting bracket for rotary encoders in connection with the ABP measuring wheels. The high level of quality of the ABP measuring wheels featuring an aluminium core and 4 different running surface structures has proven its worth and, within a short period of time, has established successfully on the market (see article on “Measuring wheels”). The new rotary encoder mounting bracket (see fig.) is provided with a mounting plate with 6 holes arranged in a 60° grid pattern (pitch diameter of 48 mm). The big advantage of this arrangement lies in the assembly of the rotary encoder. Compared to a 3-hole solution, it is possible to realise an almost ideal direction of the rotary encoder cable. The rotary encoder mounting bracket is fitted with a parallel-moving mounting plate for the rotary encoder and two guide pillars. The mounting plate is provided with 4 special plastic bearings for minimum friction. A significant advantage over angles with one-sided bearing is that the rotary encoder mounting bracket can be mounted regardless of the direction of rotation of the measuring wheel. This is advantageous for reversing systems, since measuring errors can thus be avoided. The required contact pressure is generated by springs. The maximum spring travel is 8 mm with a contact force of approx. 1.5 KG. Technical characteristics at a glance: 6-hole mounting plate in 60° grid pattern Parallel-moving rotary encoder mounting bracket making the unit independent from the direction of rotation of the measuring wheel Carefully matched spring pressure ensuring permanent contact of the measuring wheel Max. spring travel of 8 mm for relieving the encoder bearing 2 mounting slots in the base plate allowed ideal positioning

Capi Group: PARTNER OF EXCELLENCE FOR MECHANICAL COMPONENTS We are a manufacturing company specialized in the production of epicycloidal ring gears and hobbed parts. Our knowledge and turnover have both grown quickly in the last years, mainly because our corporate philosophy puts innovation and continuous improvement in first place.

The productive µ Hermann Grossmann laid the foundations for precision manufacturing in Dresden in 1863 by founding a machine factory. In 1959, the name MIKROMAT was created from the merger of two plants. Since the beginning, it has been about precision manufacturing for milling and drilling large parts and high-precision screw and thread grinding. In addition to our precision, drilling and milling machines, we produce a range of different screw and thread grinding machines up to a grinding length of 2000 mm. Internal thread grinding is realized by installing a special internal grinding device. In addition to test processing with our grinding machines, our grinding center also carries out customer orders with the highest precision for internal and external contours. Let yourself be convinced!

We as schoolboys stamping and forming GmbH + Co.KG working since 1846 as a supplier of metal processing. Finished and supply parts from various materials for industry and trade. Our product range extends from single pieces to medium series. Our manufacturing capabilities include: • CNC manufacturing to ᴓ 600 mm • high volume turned parts up to 24 mm ᴓ • own tool • Die cutting to 110 to • Welding TIG / MAG / Alu • individual trolley systems • Special Fittings We produce all kinds of fittings, stamping parts, stamping parts tool Falling or inlays in several steps. Also done in-house milling and turning as well as tool for the subsequent series production. We are happy to provide advice and practical help and guide you from the development to the finished part.

Construction 2.5D and 3D burn weld glow radiate CNC milling and boring machines to 10to

The Lehmann Mechanik AG, more than 50 years of innovation and precision in serving the customers. Whether CNC milling, CNC 5-sided machining, CNC turning conventional fodder or from rod, or prototypes. Gladly Imagine for you our skills available. Benefit from our years of experience. Translation by Google Translate

Our products can be found in turbine gearboxes, construction machinery, wind turbines, printing machines and in general plant, where one can not do without high quality gears. Depending on the needs of the clients, we manufacture complete transmission components or lead elements of the work by a contract basis. Its focus is on the tooth flank grinding on multiple Teilwälz (up to 1500 mm) and profile grinding machines (up to 700 mm). The manufacture of gears made in tempered finish or with hardened and ground gears. (Geometric dimensioning and calculation performance according to customer specifications). Furthermore, we carry out repair and overhaul of gearboxes of all makes. Individual transmission internal parts are manufactured to the pattern.

ZZ-products can be found both at home and abroad in all areas of machine and plant facilities. High quality objectives thereby play a very important position in the essential principles of our company policies. Our quality system, which conforms with DIN EN ISO 9001:2000, meets international quality requirements. Our product range extends from custom-made high-quality gearwheels to complete, massproduced ZZ-gearboxes.

We have a toothed belt wheels 30 years experience in the Manufacture of gear, chain and. With our young dynamic team and our modern machinery, we always offer you the right solution. Whether small or medium series, single or custom-made from pattern, we specialize to your needs. Their products are made on time and in top quality for you according to your material desires. Gears We produce module gears Mod 0.5 - Module 8 to about Ø 1200 mm, straight and helical teeth, with milled and ground tooth flanks. On request we also manufacture diametral pitch and Cirkular pitch gears, straight and helical toothing. All wheels are manufactured to your specifications, drawings or samples. Sprockets We manufacture sprockets Pcs. But 3 mm to 2 "according to British Standard and ASA up to Ø 1400 mm. We also produce sprockets for all chains, which are commercially available, according to your specifications, samples and drawings. Toothed wheels We toothed belt wheels for all timing belt profiles that are commercially ago. Models with or without flanges, according to your wishes. Roller and conveyor chains We deal in roller and conveyor chains and have standard version, 4 mm - 11/2 "British (B) and America standard (A) in stock, we can but procure every chain and can also produce the matching wheels..

D.S.A. INGRANAGGI S.r.l. was founded in 1988, thanks to years of experience and with the aid of modern machineries is able to offer high quality products and guarantee. The production concerns straight bevel gears and spiral bevel gears constructed through Gleason system, transmission shafts, axle shafts, spur gears. The professionalism allows us to satisfy different demands: from a single piece to mass-productions. The components are made on the basis of a technical drawing or in reference to a sample. D.S.A. INGRANAGGI S.r.l. has more than 50 machines divided into several sections, which produce spiral bevel gears, straight bevel gears, spur gears.

A brief introduction We employ metal machinists, a shortage occupation in metal industry nowadays, who produce small series of special parts on traditional machines. In this sector CNC machines are so widely used that there is a shortage of traditional machines and excess demand exists for them. With this in mind, we will purchase several traditional machines during our current developments to increase our capacity in this field. We, of course, have CNC machines as well and develop our machine pool regularly. Based on the orders received, we are able to draw up a production program for 1 month in advance and allocate our resources. Our customers basically include producers which manufacture special purpose machines for their customers (e.g. manufacturers in printing industry, shipyards, industrial scale manufacturers, food producers, automotive industry, manufacturers of medical equipment), and we produce components needed for these machines. BAT tobacco factory is included among our customers, and we manufacture wear/consumable parts required for their daily production. We produce components and subassemblies for medical equipment manufactured by Siemens and GE factories. Besides, we supply units for robotic production lines of AUDI and VW factories. The company had its first premises at the residence of the founders in Pécs. Production took place in a small workshop. At the beginning temporary workers were working in addition to a single permanent worker. The first orders we received involved simple processing of materials. In addition to manufacturing new products, we undertook and still undertake to carry out repair works. We undertook all works therefore outgrew the small workshop we used at the beginning, and in 2007 at Pécs-Hird we acquired our first production hall suitable for carrying out industrial activities with a floor space of approximately 250 m2. Here we were able to carry out production on a larger scale and serve more customers. Owing to our continuous progress and current developments, now the floor area of the production hall exceeds 1000 m2. Concerning work organization, our activities include manufacture and assembly of special-purpose products, machines and machine units. Therefore our machines and equipment are universal and able to satisfy all demands.

Your partner in mechanical subcontracting We offer a subcontracting service for mechanical components and assembled machines, in which, starting from the customer's project, we study its industrialization, we identify the most suitable production process, we rely on the most suitable suppliers for each individual production phase.

L.M. Stampi Srl is a leading company specializing in the design and manufacturing of molds for plastic injection molding and die-casting of aluminum and zinc alloys (Zamak). With over 40 years of industry expertise, we are the ideal partner for businesses seeking high-precision and premium-quality solutions. Leveraging cutting-edge technology and exceptional flexibility, we deliver tailor-made solutions designed to meet the demands of even the most challenging projects. Mission & Vision > Our mission is to provide tailored solutions with maximum precision and reliability, leveraging advanced technologies and a deeply collaborative approach. > We strive to be a trusted reference for companies seeking innovation, efficiency, and quality, supporting our partners in achieving their goals. Our Goals: - Long-Term Partnerships: we aim to build lasting relationships with clients who require a supplier capable of growing alongside them and adapting to their evolving production needs. - Advanced Technologies: we continuously invest in new technological solutions to offer high-precision molds and support even the most complex production cycles. - Operational Sustainability: we implement sustainable manufacturing processes to reduce environmental impact and enhance energy efficiency. L.M. Stampi Srl offers a comprehensive range of services: Mold Design | Manufacturing | Maintenance | Repair Injection Molding Plastics | Zamak | Aluminum Finished Products Customization | Packaging | Quality Control & Testing

BIGNUCOLO S.r.l. produces precision mechanical components and small buildings groups for many different industrial sectors such as automotive, hydraulic, textile pneumatics and naval. Valves, general mechanics, industrial vehicles components and electric household appliances are also manufactured. The company processes stainless steel, alloy steel and special alloys, aluminium, brass plastic materials; surface and heat treatments are also carried out. Bignucolo S.r.l uses machines and instruments that can guarantee high quality standards during the production processes. The firm is certified according to UNI EN ISO 9001:2008. Research, development of new productive technologies, steady attention to market requirements always aiming at the complete satisfaction of our customers. Constantly trained high skilled staff who believes in the concept of producing “quality” and state-of-the art technology are our strength points.

My company was founded in 2021, our main activity is CNC turning and milling, but we also do laser cutting and 3D printing.

Landolt-cutting technology produces precision components to customer or customer drawings. From the drawing, with experience since 1932 and universal production possibilities! Our top technology in the manufacturing process comprises: Conventional turning on lathes Ø2, 0 to 25mm with a maximum length of 150 mm, conventional turn on turret lathes up to Ø 30mm, turning on CNC lathes (9 axes) up to Ø 25 mm and a maximum length of 330mm, gears: Straight-bevel and worm gears hobbing module to 1.5 and 2 respectively, 5, centerless grinding, honing, galvanic treatments, heat treatments, etc. The quality of our products is guaranteed by a complete, production-integrated quality management according to DIN EN ISO 9001/2000.

• Precise turning parts from Ø 1 to Ø 42 with max. length of 500 mm • Gear tooth forming from m 0,1 to m 2,0 with max. Ø 100 mm • TÜV Certified Quality management according to DIN ISO 9001:2000