As an efficient partner for your success, HEWI offers broad-based expertise along the whole route to your product, from the initial development through to series production. Your vision: From the design to the series product • Starting with a model or a drawing • Transfer into our 3D system – Siemens NX / CATIA • Design of the product as an economic injection moulding • Rapid prototyping • Material selection and testing, strength calculations • Working through requirements specifications – preparation of performance specifications • Design FMEA Your requirements: Comprehensive project planning • Definition of all specific characteristics, requirements and quality objectives • Preparation of a production plan: Logistics from raw material through to delivery • Advance quality planning, process FMEA, test & inspection planning • Definition of all resources, supplies and auxiliaries required • Purchasing, installation, enabling, training, process validation • Comprehensive project management: Customer requirements, scheduled dates/deadlines, costs Injection moulds • Fill analysis with Mold Flow: analysis of weld lines and stresses • Selection of the ideal mould concept • Thermal analysis of the product: distortion and dimensional stability • Mould design in 2D and 3D • Definition of the required process monitoring: sensors and scanning systems such as HB-Therm Flow or Kistler pressure sensors • Mould production in Germany or with worldwide partners • In-house mouldmaking From the preliminary sample through to series production • Product support from the first-off tool parts until handover to series production: tests, samples, changes, assembly trials, automation • Verification of process capability • Comprehensive testing options due to in-house laboratory and measurement & test room • Revision of the process FMEA: Feedback to the design phase • Clearing and start of series production: Presentation of the initial samples with test reports Company facts & figures • More than 70 injection moulding machines: 22 to up to 1600 to (DEMAG, Ferromatik, Arburg, Engel, Krauss-Maffei) • 550 employees • Our own brand products and manufacturing of different engineering plastic products • Automation: articulated robots, linear equipment, dying equipment, driers, assembly lines and assembly machines • Production methods: standard injection moulding, 2 and 3-component technique, mono sandwich, gas injection technique, moulding in inserts made of steel, plastic or electronic parts, in-mould decoration of films using the „SKIN LINE“ process • Production of high-quality surfaces: painting/enamelling, electroplating and coating with partner companies • Assembly of subassemblies, welding of plastic products, printing and assembling through to the finished sales packaging • Delivery to the customer: Use of different container systems and worldwide delivery Certified quality • Certified by EN ISO 9001:2015 • Environmental management by EN ISO 14001:2015 • Medical devices by EN ISO 13485:2016 • Energy management by EN ISO 50001:2011 HEWI Heinrich Wilke GmbH Bereich Kunststofftechnik Hagenstr. 2 | 34442 Bad Arolsen-Mengeringhausen | Tel.: +49 5691 82-735 | Fax: +49 5691 82-712 | info@hewi.de | www.hewi.com

Our services at a glance:  Intelligent inflatable seals "eCOREseal"  Molded seals  2K molded seals (plastic / elastomer, e.g. molded sealing lips)  Extruded profiles  round cords  Hose rings  cuffs  Special materials with approvals (drinking water, food, pharmaceuticals and hygiene EHEDG)  FFKM, FKM, EPDM SILICONE, NR, SBR, NBR, HNBR  Training for technology and buyers in the field of sealing technology Sealing solutions - a holistic approach Thanks to many years of experience in the field of sealing technology, we offer our customers comprehensive advice in advance, through the physical layout and design of the seal, right up to the first sampling and ultimately series monitoring. By analyzing your purchasing behavior, we can help you slim down your purchasing portfolio. Our customers bundle inquiries and thus also the costs in the area of sealing technology.

We are a company with a tradition since 1900. Around 100 years experience in plastics technology coupled with the most modern manufacturing techniques make Kümpel for the first point of contact for custom-made acrylic glass solutions for demanding industrial customers. As one of the world's first Verabeiter of PLEXIGLAS ®, we have a comprehensive know-how in the field of plastics processing and are among the pioneers. Today we are able to solve complex problems of our international clients individually through the use of different plastics. We use plastic plates; blocks; tubes; rods in clear or colored, such as PMMA; PLEXIGLAS ®, PLEXIGLAS ®-Satin DC, SC; PLEXIGLAS ® LED; PLEXIGLAS ®-Endlighten; PLEXIGLAS ®-Heatstop; PLEXIGLAS ® flier material; PLEXIGLAS ®-Solari material; PLEXIGLAS ® Optical-HC; PLEXIGLAS ® RESIST; MACROLON ®; MACROLON ®-multi UV; MACROLON ®-AR; Lexan, PC tubes, mirror, PETG, PETG DIN 4102-B1; VIVAK; Axept , PVC, soft PVC Astra glass; PA; POM; PTFE; PEEK, HP, HP-2061.5; HWG, EP GC 203, PC film; KASI ®; Whether according to sample or drawing - dude produces finished parts for all applications of the highest quality. When it comes to plastic materials and their processing, such as: - Cutting, drilling, milling, turning, polishing, gluing, molding, printing and laser cutting goes, you are the right place! On our website we provide you with an overview across our services. We are available at any time for an individual consultation.

The Plastics Technology GmbH Dresden is producing machine parts and assemblies according to your drawing specifications from ALL commercial plastics such as POM PA6 PE1000 PEEK PAI Makrolon acrylic and fiberglass reinforced plastics. Also, a production of hoods, doors, protectors made of Makrolon / acrylic is possible with us. Our cutting service allows you a quick availability of their specified dimensions for blanks of semi-finished plastics. We also offer thermal processing, gluing, welding, surface treatment of plastic parts, including teeth and sealing technology. Our Customers can be found in the fields of packaging machinery, medical technology, various transport companies, cleanroom technology.

EIKOS srl is a manufacturer of technical plastic parts and specializes in injection molding, overmolding and 3D printing. In general, we process all common technopolymers that are available on the market: PS - ABS - PP - PE HD - PET - PA 6 - 66 - 68 - POM - PC - PBT - PVDF - PPS - PU -Teflon. The company was founded in 1995 and is based in Turate, a suburb of Milan. Turate is a strategic location due to its proximity to the Swiss border and all Milanese airports. Together with our customers, we develop components for a wide variety of applications and requirements: electrical industry, machine and plant construction, chemical industry. https://www.youtube.com/watch?v=jR1EVlDcHCw

EWOQE was founded in January 2021, starting with a single machine. By 2024, the company had developed into a team of four highly qualified employees from the region and now operates around 90 machines. We now provide our customers with a wide range of additive manufacturing techniques to meet their diverse needs. - FDM / FFF [* commercially available filaments from Spectrum and extrudr] - SLS [PA12] - SLA [all * commercially available resins from Formlabs] - MJF [PA12] We source our materials and raw materials exclusively from renowned companies to ensure continuous quality. EWOQE collaborates with various companies in the field of industrial manufacturing. Our work in the field of large format printing deserves special mention, as we have been able to support renowned players from the fields of art, culture and politics as well as public institutions from the initial idea to the completion of the project.

BC ITALIANA is a company with over 50 years of experience in both product engineering and plastic injection moulding of complex components. Currently the moulding department (4,800 square meters out of a total of 6,100 available) consists of 30 machines with 50 to 1,000 tons clamping force: this great difference of tonnage allows the moulding of micro components up to large or medium-sized parts. Furthermore, some plastic parts are produced by nitrogen moulding technique. This process can avoid functional, structural and aesthetic problems that sometimes arise with traditional moulding methods. BC ITALIANA manufactures, according to the highest quality standards, a wide range of products belonging to many industries: from automotive to rail, from medical to musical instruments. The main competitive advantages of BC ITALIANA are the long-time experience in engineering and moulding of complex plastic components, both from technical and aesthetic point of view. So, when it comes to dealing with customised and complex plastic parts BC ITALIANA performs at its best. Co-design, problem solving and extremely cared injection moulding are BC ITALIANA special services for all its clients.

Werner Breitschädel GmbH has been active in the field of machine and tool construction since 1950. For our satisfied customers we manufacture precise tools and mechanical engineering and plastic parts. To carry out our orders, we have a team of highly qualified employees who are always up to date with the latest technology thanks to regular further training.

Experience in the field of special parts manufacturing, we are able to produce, to analyze the cost-effective production processes for their applica-tions from small series to mass production. Bending technology, Mechanical processing, Forging and hot pressing, Welding, Die cutting, Surface finishing, Tooling, Heat treatment, Assembly

Expyou srl is specialized in the design of molds in the molding of plastic injection and blow molding items. We have an efficient mold construction department, we use aluminum and steel to meet the needs of the customer In addition to the Italian reality, we have a very competitive foreign production site for both molding and assembly. Our strengths are the punctuality and the quality of the supply,

About us With our industry expertise, we can help you successfully and promptly implement your production project for mechanical components, assemblies, and housings for small to medium-sized series. For more than 20 years, we have been experts in die casting, injection molding, and other mechanical processes. Our focus is on cross-process thinking. In Germany, Europe and Asia (in-house certified production) we manufacture your mechanical components, assemblies or housings. Our manufacturing services include: Engineering: Technology consulting (wide range of materials and manufacturing processes); CAD evaluation, construction & development Prototyping (close to series production; 1,-3,000 pieces) for die casting, injection molding, precision casting, sand casting, PA casting, vacuum casting, CNC milling, SLS & SLY Series production for batch sizes of up to 25,000 units Metal: aluminum die casting, zinc die casting, deep drawing, gravity die casting, sand casting Plastics: injection molding, thermoforming, extrusion Our Services: Project-related surface finish Coordination of the entire production project Advice along the value chain Assembly service, measurement reports International logistics service

Netmade is a dynamic Business Network of 5 Italian SMEs from the industrial district of Reggio Emilia (Italy), that decided to join together, share values, skills, expertise and enter the market as single entity, in order to offer a 360° view on the Rubber & Plastics world. Netmade has set as its goal to follow Customers' projects providing them a complete service as sole supplier in many different fields: R&D, product engineering, mould construction, plastic injection moulding, thermoforming, blow moulding, rubber processing, post-production workings and finishings. We are offering: 61 Injection moulding machines, from 8 to 650 tons, for the following technologies: - Injection moulding (60) - Injection moulding around inserts (61) - Doubleshot moulding (1) - Transfer moulding (1) - Micro injection moulding (1) 6 Blow moulding machines, from 40 to 120 tons, for the following technologies: - Extrusion blow moulding 34 Compression machines, from 5 to 300 tons, for the following technologies: - Compression moulding 2 Injection compression moulding machines, 100 tons, for the following technologies: - Injection compression moulding 24 Rubber injection moulding machines, from 60 to 300 tons, for the following technologies: - Rubber injection moulding 8 Thermoforming machines, from 800*1200mm to 2500*3500mm, for the following technologies: - Thermoforming 1 3D Printer, for the following technologies: - 3D Printing 4 Ultrasonic welding machines 4 Lathes 6 CNCs 5 Sinking EDMs 1 Wire EDM 6 CNC milling machines 1 EPS foaming machine 7 CNC cutting robots 1 Cutting machine 1 Hot bending machine 2 Hot plate presses

We (Atabeta Makina) are a company specialized in inventing and delivering solutions for various engineering problems and manufacture different products all under one roof. We have CNC machines (CNC milling & CNC turning) drilling, tapping, welding etc machines in our machine park. As well as machining & welding jobs we work as Contract & Custom manufacturer, we also work surgical orthopaedic implants sector. Apart from that we service all kinds of plastic & sheet moldings. You can visit our website www.atabetamakina.com for more information. and we would like to support you according to your parts inqueries.

Roth plastic + form GmbH has been active in the field of injection molding technology for more than 50 years. At our locations in Balingen (Germany) and Veröce (Hungary) we produce sophisticated injection molded parts for the automotive, appliance and electrical industries with a total of 80 employees.

ZEIKOS GmbH is a service provider in the field of industrial 3D printing from individual parts to series production. We work with PA, silicones and transparent plastic. Our advantage is that we can solve problems for our customers because we are both a design office with a small mechanical workshop and we have a network of manufacturing partners. We specialize in producing your printed parts with series finishes. From medical surfaces to surfaces for outdoor use. In addition, we can support you with the construction or simply with the data transfer for 3D models.

Italstock Srl's main skills consist in mould and product development support and manufacturing of technical and customized drawing parts in elastomeric materials. Our commitments flow into automotive, heating, hydraulic, pneumatic, household appliances and industrial fields, where we have been improving our know how since the eighties. The company has been active in this sector since the early 80s and is based in a highly industrialized area, characterized by significant tradition and experience in the production of industrial seals and in the rubber processing industry. The activity is supported by a distinctive entrepreneurial skill associated with competence, passion for one's work and continuous predisposition for improvement.

SOMEIL is specialized in zamak 5 (z410 / zinc alloy) high-pressure diecasting and electroplating treatment (nickel or chrome finishing) in-house. We have human and material resources to assist you from the Mold design/manufactoring to delivery of the final product. We are certified by ISO 9001 since year 2000. Currently, our Quality Management System is certified to ISO 9001:2015. Contact us for more information.

THE COMPANY Poliamid Plastics is a dynamically developing, Polish, family-run company operating since 1989 on the market of plastics. In the initial period of operating, the company only produced simple elements for the mining industry, and industrial fittings. Today, Poliamid Plastics is the company that offers several thousand of products. We specialize mainly in producing accessories for preinsulated pipes as well as plastic protections for many industries. We also carry out special projects for our customers, ranging from design to serial production. WHAT DO WE OFFER? The highest quality components, produced by our company are applied in various sectors of industry in the whole world: – plastic protections: caps and plugs for many sectors of the industry, – products for preinsulated pipes: centerrings, pipecaps and accessories, – special products: components made according to individual customers needs.