Our company was founded in 1994 and grew into a universal partner for the fastening technology - zoom and equipment and the automotive supply industry - and stamping industry, mechanical engineering, plastics industry and medicine. In our activities, we pursue three main directions: Production and sales of tools for forging and for the pharmaceutical - and plastics industry Sales of fastening technology of titanium and other special alloys for the automotive and aviation Equipment works for fastening industry, engineering for special solutions in the metal working industry PRODUCTS Modern machinery combined with years of experience, has established WSD with quality, service, dedication and reliability at a leading mold manufacturing company in Europe. Starting in tool for cold and hot forming tool further spectra were opened. Our precision tools found among others now their use in industrialized areas of plastics processing, fine blanking technology, special machine construction as well as the pharmaceutical and medical technology. The Trade of fasteners, screws and fittings complements our service portfolio.

Production profile Industrial service providers and manufacturers of capital goods • Development, design, manufacture, assembly and commissioning of components or complete systems according to customer requirements • Individual solutions with exact Manufacturing accuracy • Repairs, maintenance, conversion, implementation, expansion of existing machines and systems • Industrial service • Compressed air technology / service (specialized in KAESER compressors) • item pluspartner • Arms manufacturing license Main profile • Special machines, systems, aggregates and components for the capital goods industry • Filter systems for particle filtration • Container construction • Steel construction • mech. Machining workpieces • Refurbishment and revision of drilling and construction machines • Precision machining in automatic construction down to the zero dimension range • Production of weapon parts and complete weapons • Tool making • Production of analog film production systems Services etc. • technological steel construction • Assembly services for all chemical, pharmaceutical and production engineering apparatus and plant engineering • All types of welded structures • Profile construction • Aluminum profile construction • Industrial services • Maintenance, inspection and servicing of mechanical equipment • Tool repair (grinding, sharpening) • Repair of film and photo technical systems

HoFe Werkzeugtechnik is your reliable supplier for special and standard parts of the highest quality and precision. Whether cutting, guide or spring elements as well as gas pressure springs and special special parts according to drawings are included in our delivery program and we can deliver them in the best quality at low cost. Much experience With more than 20 years of industry experience and decades of experience, we convince our strong global partner. Many possibilities We support you with punching, bending and forming tools, as well as with special machine and fixture construction of all kinds with technical know-how. Lots of trust We implement your product - you lower your costs and save time with our short-term deliveries. Almost too easy to be true? See for yourself! From toolmaking to special machine construction - we are more than just a supplier. We are your close and strategic partner with whom you can reduce your costs and save time.

Under use of pioneering technologies, we are over 20 years one of the leading providers of innovative and standardized system solutions in automation. Our products and services contribute to the increasing demands of faster production processes to meet and increase the quality of the final products. Our customers appreciate our expertise and commitment of highly qualified staff. With new products we shape the market. Our Services: - CAD Design - Electrical Engineering - CNC parts manufacturing (turning, milling and wire EDM) - Assembly technology and Baugrupenfertigung - Tool and mold making Our Products: - Semi-automated manual workstations - Robotergreifsysteme - General. Test Bench - Welding devices - General. Jigs and fixtures Our industry solutions: - Automation of machine tools - Test benches for sanitary fittings - Medical

Today, shorter development times and process chains are decisive success factors. As a strong partner, we can provide you with all-round solutions for product development and production. - We shape your requirements and requests in teamwork. - Everything under one roof design and development - prototyping - resources construction (tools and dies, jigs and fittings, etc.) - series production

The PHOENIX tooling GmbH is high vacuum technology as a service-providing tool and mold as well as manufacturers of precision parts, assemblies, special machines and Equipment supplier to the national auto industry, medicine and household appliances, machine and plant construction, as well as steadily growing, and the solar and solar industry.

Welcome to Dino welding technology! Exceptional performance and quality are always the result of a thorough planning. Our work does not begin in production, but always starts with the first customer conversation. Customers are cooperating successfully for years with us know exactly appreciate it. On a production area of 3,000 square meters to advanced equipment and highly qualified professionals to meet in order to achieve the best possible quality in common. We consider it to assist in all areas as an important task our customers. This thinking and action has made us a reliable partner of many major companies.

In 2006, Oskar Rüegg Bulgaria Ltd. was founded in Stara Zagora as an extended workbench of Oskar Rüegg AG for the manual and tool-assisted assembly of components. In the first years, the company was managed by the owning family itself in order to ensure the sustainable further development of ORBG. In each of the years after its foundation, the company has been able to show multi-digit sales growth and this has led over time to ORBG evolving from a pure assembly company into a more complex business entity, incorporating in its portfolio, among others, the following industrial services: Project Management, Procurement, Quality Assurance and Logistics services. During the last years, the highly motivated management team has also been independently developing customer portfolios, mainly in the field of assembly of sub-assemblies and production of stamped parts. In order to meet the high quality management requirements of our customers, the Bulgarian company was certified for the first time in 2009 according to ISO/TS 16949 and ISO 9001:2008 by the Swiss SQS. On the basis of annual audits, the high standards are constantly proven. The company currently has a production area of 4800 m2 and employs more than 230 people. Customers and activity: HELLA GmbH & Co. KGaA - automotive industry (headlights) - stamped parts production and assembly Automotive Lighting GmbH - automotive industry (headlights) - stamped parts production and assembly Belimo AG - construction technologies (damper actuators) - procurement and assembly Micronel AG - medical technologies (fans) - assembly of components ABB - electrical engineering (conectors) - assembly of components Other customers WHY should you work with Oskar Rüegg Bulgaria Ltd? - Swiss management level and Swiss understanding of quality - Experience in industrial services - Reliability of the processes - Reduction of administrative work for the customer - European culture and way of thinking - Competitiveness through Bulgarian cost structure

Thermopol GmbH — Your specialist for high-temperature seals and technical textiles Thermopol GmbH is a leading supplier of high-temperature seals and technical textiles. Based in Dinkelsbühl, Germany, the company specializes in manufacturing and selling innovative solutions for demanding industrial applications. Our products, including a wide range of seals, tapes, cords and hoses, are characterized by their exceptional temperature resistance and durability. We rely on high-quality materials such as glass, ceramic and silicate fibers to meet the high requirements of our customers. Through continuous research and development and high quality standards, Thermopol is able to offer tailor-made solutions that are precisely tailored to the needs of our customers. Our expertise covers applications in various industrial sectors, including automotive, petrochemicals, steel, power generation, and many more. Thermopol stands for quality, reliability and innovation. We are proud to offer highly specialized products and excellent service to our customers all over the world. Discover our wide range of products and be impressed by our expertise and expertise.

Materials A demand-sorted material storage provides the conditions for short delivery times, maximum flexibility and punctuality. Also, the materials used, the quality plays a decisive role: For use only high-quality cold-rolled strips reputable, certified mills come. Materials are processed from 0.05 to 10 mm thick and coil widths up to 400 mm. The range of materials includes the following qualities: Unalloyed steels according to DIN EN 10139 Hardening steels according to DIN EN 10132-2 Quenched and tempered steels according to DIN EN 10132-3 Spring steels according to DIN EN 10132-4 Stainless steels according to DIN EN 10088-2 Aluminum and wrought aluminum alloys according to DIN EN 485-1 and DIN EN 485-2 Copper and wrought copper alloys according to DIN EN 1652 and DIN EN 13599 Hard paper, pressboard, plastic Toolmaking The quality of the tool is one of the most important prerequisites for trouble-free and efficient punching parts production. The tooling of E. Winkemann manufactures tools with highest precision. The field of tool / construction is equipped among others with the following devices: 2D and 3D CAD systems in the field of tool design CNC EDM, drilling, milling and jig grinders with CAM connection The exchange of design data is in IGES or DXF format. For around 6000 are consequential, composite, flexural, and embossing tools or total cuts available. Stamping technology The stamping of E. Winkemann is equipped with a powerful machinery, responsive to the diverse areas of use and the materials to be processed. The machines range from mechanical or hydraulic punching machines and presses to various bending machines: Hydraulic machinery and punching machines (25 to 500 tons) Eccentric (10 to 35 tons) Hydraulic presses (15 to 200 tons) Punching and bending machines (up to 15) Stamping machines (up to 200) Fine blanking machines (up to 700) Fineblanking / cutting The fine blanking allows the production of precision parts with smooth cut surfaces and high dimensional accuracy. Costly rework can be omitted. Straight-cut percentage up to 100%. The fine blanking machines with max. 320 tons pressing force can process material thicknesses up to about 7 mm. In addition, there is also the possibility of products on fine blanking machines with max. To process 700 tons press force. Flatting If the required thickness tolerance or flatness can not be achieved by cold rolling with the primary materials with a thickness of 0.8 mm, the parts are ground flat. The result is a thickness tolerance and flatness of ± 0.005 mm. High demands of these parameters are primarily intended for products which are used for example in units and transmissions. Representing this are start-up, passport and shims to call. Fine grinding Slices or moldings with a thickness of 0.8 mm and an outer diameter 4.0 mm könnnen be honed for maximum precision requirements with a tolerance of ± 0.001 mm. Post For the post-processing of the products are modern, electronically controlled and linked compensation and processing equipment available: Fully automatic compensation system with process data acquisition and batch documentation Program-controlled systems for automatic vibratory deburring Washing and cleaning equipment Machines and assembly equipment for drilling, tapping, riveting, stamping and assembling. Surfaces All parts ...

The Deggendorfer workshops with the branch works Regener workshops, Plattlinger workshops, Mettener workshops and Teisnacher workshops are suppliers to the industry in the areas of punching, pressing and profiling. Our in-house design and our own tool, we guarantee you quick capacity availability and deadlines. Quality and reliability are our company's philosophy. Translation by Google Translate

We as schoolboys stamping and forming GmbH + Co.KG working since 1846 as a supplier of metal processing. Finished and supply parts from various materials for industry and trade. Our product range extends from single pieces to medium series. Our manufacturing capabilities include: • CNC manufacturing to ᴓ 600 mm • high volume turned parts up to 24 mm ᴓ • own tool • Die cutting to 110 to • Welding TIG / MAG / Alu • individual trolley systems • Special Fittings We produce all kinds of fittings, stamping parts, stamping parts tool Falling or inlays in several steps. Also done in-house milling and turning as well as tool for the subsequent series production. We are happy to provide advice and practical help and guide you from the development to the finished part.

With a presence of over 27 years in the German market, we are committed to providing high-quality services and paying attention to every detail of our projects. We are recognized for our professionalism and seriousness, the high quality level of the products and services offered, as well as the prompt response to inquiries and the delivery of ordered products and services. Services and expertise: Design and Verification: We offer comprehensive PCB design and verification services. Our team of specialists helps you develop optimal technical solutions for your specific needs. Digitization: We stay up-to-date with the latest technologies in digitizing documentation and processes to ensure that your PCBs and data are managed efficiently and accurately. Pre-production: Our experience in PCB verification is one of our main advantages. We ensure that every aspect is considered before the actual fabrication of printed circuits. Highest Quality PCB Execution: The quality of the PCBs we provide is recognized and appreciated in the Romanian printed circuit market. We adhere to IPC 600 and IEC 326 standards, and our specialists are certified in accordance with the IPC-A-610 standard. Quality Commitment: With pride, we guarantee excellent quality! Our qualified staff, UL certification, and ISO certification are evidence of our commitment to maintaining high-quality standards to meet the expectations of our customers. No matter how complex or simple your projects are, we are here to help you realize them. With an experienced team in data preparation for manufacturing, we guarantee efficiency and precision in every project. This allows us to produce PCBs ranging from the simplest to the most complex, with up to 28 layers. Over time, we have had the opportunity to produce printed circuits in all fields of activity, collaborating with both local firms and multinational companies. That is why we are proud to develop customized PCB solutions that perfectly meet your needs and offer you materials of the highest quality. From FR-4, Aluminum, Teflon, Copper core, Polyamide, and Rogers to Flexible PCBs and Rigid-Flex PCBs, we have the expertise and resources to use various specialized materials according to your requirements.

Dr. Franke GmbH & Co. KG are nationally and internationally as recognized partner in the field of stamping and forming. The field-proven know-how is based on a many years of experience from the beginnings of plate lock- technology to modern technology in sheet metal forming. Here you have a dedicated development and Staff team is available that with sound knowledge a wide range of manufacturing dominated alternatives. ° STAMPING ° DEEPDRAWING ° FINEBLANKING ° WELDING ° MOUNT ° COATING ° CONSTRUCTION ° TOOL ° PROTOTYPE With individual, custom manufacturing for large- and small series presents Dr. Franke GmbH & Co. KG is the constantly changing product and logistics requirements of the international industrial Only by Dr. Franke documented real customer focus.

As experts in metalworking, we produce tools, molds and parts for you that you need for your individual application. In addition to classic and demanding toolmaking, we have primarily specialized in wire EDM. Wiring or eroding is a very accurate process that requires the greatest care. Of course, turning, milling and grinding are also part of our everyday work, which we integrate competently into the ongoing production processes.

Our Company For nearly 70 years the company Gebr Unglaub + Co. GmbH produces metal goods. One year after the company was founded in Niefern at Pforzheim by the brothers Friedrich, Hans, Heinrich and Otto Unglaub already follows the company's first expansion by opening a branch operation in Zeutern in Bruchsal. Business purpose of the two companies is the production of turned parts. In 1940, a tool and fixture is affiliated with Production machines for the production of cold forged parts. The company also established with this group of products on the market, so that the further diversification nothing stands in the way. The establishment of a metal spinning and fabrication shop in your own home allow for the non-cutting shaping the extruded parts as a third product variant. The following years are the expansion and stabilization of the business, that is by using the latest technologies and well-trained professionals, for the production of parts of the highest quality and precision today. Our objective is always to find solutions together with our customers to produce and, therefore, contribute to the creation of competitive advantage high quality products as part of an optimized production process. Our program Our production program includes: * Technical extrusion and stamping parts * Machines and CNC turned parts * Paint Cups * Tool and fixture manufacturing ... and of course everything with full-service brand Unglaub. Our products Wherever you can imagine the use of forged parts made of aluminum and copper, we can offer you solutions. We have a very high degree of vertical and are fixed with our products either on specific industries or specific applications. Our custom manufacturing in connection with the development and production of the necessary tools gives you the advantage to move parts of your problem-solving processes to us your suppliers and specialists in this field. Take a look at our product range: * CNC Turning * Fließpressteile * Filter * Color Cup * Pressure Vessels * Also Turning we do NOT mass produced, but have moved us here on the production of high-precision parts according to DIN or factory standard. We work on almost all metal materials, including a variety of stainless steels. Another field are our color cup and pressure vessels, which we can depending on the application in different sizes and both aluminum and stainless steel provide.

Hirtenberger precision engineering for decades the specialists for chipless metal processing. A company of long-established group of companies Hirtenberger AG. Our staff in the design and tool to solve even the most difficult customer. These are our most advanced technologies available. Their products are manufactured on the most modern eccentric presses or punching and bending machines (Bihler). With these technologies, we can offer you the most economically and technically best solution tool. The specialists for chipless Metalworking Stampings large and small series Complicated stamped and bent parts Moulded stampings Assemblies

Experience, quality and Kontuität for over 40 years: The company has been manufacturing Schweigert 1959 progressive tools, drawing tools and simple tools for various industries. Almost as long as we also supply stamping parts to our customers - produced on presses and punching machines from 3t to 340t maximum pressing force. Of course, we also offer sub-assemblies or welding, whether as spot welding, stud welding or TIG welds. We work for many years after the Qualtätsnormen DIN AN ISO 9000 and are therefore able to provide our customers reliable to use according to his requirements. From small to large Our products range from the smallest parts for the electronics and precision engineering in the milligram range up to part weights of more than two kilograms. Flexible We adapt also the quantity requirements of our customers. In addition to large-scale production, we are also able to produce products cheaply in smaller and smallest numbers. This is made possible by a development partnership with our customers to develop optimal as possible, product-oriented solutions.

The Hausmann is a family run business for 60 years, which is consistent with the principles of customer satisfaction, price and quality consciousness.