We from the model and mold construction J. Gördes produce since 1989 molds, devices, prototypes and foundry models on the highest level. Our aim is to provide our customers with the highest level of quality and dimensional accuracy in the form of our products in order to best support the customer processes. In this way, we create added value in the entire following production chain. In addition, we are available with our entire know-how for our customers and also bring us far beyond the actual mold making. From the very beginning, we understand our customer relationships as long-term partnerships in which we can develop together in order to achieve the greatest possible added value on both sides. The decisive factors for customer satisfaction are essentially the following aspects: • Documented dimensional accuracy • Production quality • Handling in the manufacturing process of the customers • Fast and competent advice and order processing • On-time delivery All employees are involved in the continuous improvement process to achieve the highest possible quality standards, and this ensures day after day that all the knowledge and experience contribute to the sustainable development of our products. In addition to our customers and employees, our suppliers are also part of the quality philosophy. Through long-term cooperation and continuous exchange of experience with them, we ensure consistently high quality and further development of our products. Likewise, we keep up to date with the latest technology through lively exchange with innovative suppliers. With this quality policy we pursue the following goals: • a high level of customer satisfaction in terms of the quality of our services and products. • the lasting assurance of high quality at all stages of the work process through careful planning, preparation and implementation of all necessary actions • the consistent application of preventive quality assurance measures to minimize or avoid the occurrence of errors. • securing the organizational conditions to ensure smooth and close cooperation of all employees of the company permanently. • Compliance with all customer requirements and legal obligations Our quality management is defined in a handbook and corresponding applicable documents and thus binding for all employees of the company.

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of complex technologies with the support and cooperation of competent companies.

D + M Z��gel GmbH was founded in 1984 in Schiffweiler / Heiligenwald. In 1989, the company relocated to Überherrn / Altforweiler in the industrial street. Since that time our company has grown continuously. Already in the founding year, we became suppliers to the company John Deere, CLAAS and Kuhn. In order to meet customer wishes and requirements, In 1995 our production was extended to 3 halls. In 1996 Rubber Technology became reinsurer of Terex Demag. As a medium-sized company, you will find our products everywhere, where precisely stamped and processed parts made of rubber or PVC for the Industry needed. Through close cooperation with our customers we are able to optimal solutions and dimensionally accurate products - also in economic Respects - to offer. Our expertise, our modern production facility and our high Quality standards guarantee consistent quality and punctuality Delivery of our products. Our quality standard has been decreasing since 2002 DIN ISO 9001: 2008 certified. With our experience and our technology, we are the right competent Partner for your business to meet the challenges of the future to encounter. Our long-standing customers confirm our capabilities grown partnerships.

We are an efficient company from Saxony with our own development and well-trained and experienced specialists in design and production. Since our foundation in 1992, the company has expanded continuously and we can refer to a large number of satisfied customers in Germany, Europe and all over the world. Convincing quality in production, extensive experience in the fields of tool making, forming processes, automation technology, special machine construction as well as apprentice training and further education are among our strengths. We manufacture mainly for the automotive and supplier industry, mechanical engineering, electronics and precision engineering, the construction industry and other industrial sectors. Translated with www.DeepL.com/Translator (free version)

Our customers appreciate us for our quick and uncomplicated action. We do not do without first-class equipment and manufacture on a 5-axis simultaneous milling machine DMU 50 from DMG with high precision and uncompromisingly. Only quality - and that fast! We are a small, flexible company and work successfully for: Accuracy: Your order demands absolute precision, which we offer you. Simulation: You will get a perfect result through precise planning and simulation. Care: Thanks to the correct handling of the workpiece, we receive the highest quality. Investment: We invest in our technology to offer you the best possible results.

We are a solid positioned company which for over 20 years engaged in the tooling and contract manufacturing. As a competent and powerful partner we manufacture according to customer drawings or record accurately one-offs, small batches and assemblies. We offer all technical production, technological and organizational services for the realization of your projects. The products are manufactured using the latest CNC technology and powerful CAM software. With our products and services, we serve many areas of German industry. Our customers include renowned manufacturers of food & pharmaceutical industry. Problems are discussed in part on site with the customer to put together - even at short notice - to realize optimal solutions and deadlines. Our own fleet ensures that we can handle the whole of Germany on time and satisfactorily our customers' orders.

Competent - Fast - Flexible Your partner in tool - Stamping - Welding For more than 35 years experience in stamping, bending, Progressive and fine blanking tools Own production up to 400 tons. Punching force, specializing in small series, with annual precipitation up to 200,000 pieces. Over 30 years of experience in welding technology: - Capacitor discharge welding - Spot welding - Projection welding We're here to help. Talk to us.

Today we are capable to stamp holes Ø 0.09mm (automotive) or death-sharp needles (medical). • Micro stamping • Fine blanking • Progressive stamping • www.hanggi.com Here you see only a small range of our specialities of course. We would also like to invite you to a tour in our fabrication for showing you the advantages of our possibilities. For any questions please don’t hesitate to contact us. We are at your entire disposal.

Construction & Design reconsider - new ways and possibilities with 3D printing / additive manufacturing process various processes and tools are needed to reach the goal | I want to help you

In the near future, the company Hermann sheet GmbH, which was founded in 1949 by Alfred Hermann, continued in the third generation. The successful mix of Swabian quality work and cutting-edge technology ensures the success rate in our house. Worn and determines this success is due to the extensive know-how of our qualified skilled workers. The company's roots lie in the manufacture of precision sheet metal parts for the telecommunications industry. In the recent past, the company has increasingly specialized in the production of near-series samples and small series. We see, in addition to the precision of our sheet metal parts, the high quality and great flexibility as a significant advantage for our customers. Benefit from our long- years of experience as a sheet metal pro ... ... we look forward to a good cooperation. Company Description The company Hermann sheet GmbH was founded in 1949. The range includes precision sheet metal work from the board to the finished product. From prototype to series with all the trimmings. By Hermann Blechtechnik they get everything from a single source, as we work in the same company group with specialized companies and from one piece. From the development, design 2 +3 D, prototyping, testing through to series production and delivery of finished products according to our customers. New to Hermann Blechtechnik: Electromobility Development Production of 2 and 4Rad vehicles. Production of HOT CHILI mountain bikes Street Steppers Body Buddy as a new fitness machine. Prototype of ELMOTO as electric motorcycle clothing. Development of Stepelec g of an electrically driven stepper.

The John Banholzer Metallwarenfabrikation GmbH is an owner-managed, medium-sized companies in Berlin, which has been operating for more than half a century as a manufacturer of forged parts, especially for the automotive industry. Our core competence lies in the metal forming. We manufacture high quality stamping, bending, - and drawing parts of varying difficulty in a variety of lot sizes. With our modern stamping and transfer machines with a pressing force 50-320 t we can edit tape material comprises from 0.1 up to 6.5 mm for all common steel, stainless steel and non-metal materials and even stamping gold-plated circuit boards as well as two deep drawing presses 115-250 tons of force also manufacture deep drawn parts. To our manufacturing range includes the manufacturing of sheet metal and welded assemblies by welding and assembly fixtures. The basis of our performance in the series production represents the tool and fixtureThese include conception, design and construction of optimally designed for the purpose of tools in close cooperation with our customers. Following these ideas, we build bending, embossing, cutting, thermoforming, and Progressive and transfer dies. We also manufacture prototypes, pre-series and patterns cheap and quickly with the help of standard tools, devices and support tools. Every day it inspires us, that for many years then, leading companies in the automotive industry such as Daimler and ZF at us, and customers from other industries such as Bosch-Siemens in the household appliance industry, Otto Bock HealthCare from the medical and Siemens in the energy trust us. In recent years we have expanded our production portfolio and expanded our capacity in the hybrid region, especially in case of power rails for batteries.

Company Description The company Knauß - metal machining is active in the areas of wire EDM, sinker EDM, turning, milling. The machinery in tool consists of 3 wire EDM, an EDM machine, 2 CNC milling machines, two lathes, a sand blasting cabinet and a surface grinder. Our CNC milling, we have a Chiron FZ12 W milling center the opportunity to very large numbers in a very short time coping (pivot table with 4 Vices and fast tool change times) and a Hermle 900E with the following travels: X 600mm, Y 400mm, Z 420mm We Customize falling in our tooling, stamping, embossing and composite tools, 1-gang and multiple. We manufacture in small and large series, hollow spindle stops, T-Nutensägen, circuit boards, stamps, cutting dies, pinions, gears of all types, gripper jaws, gill pins and all kinds of drilling and clamping devices on our CNC milling and EDM machines. If they need more information, they are welcome to contact us. Unfortunately, our web - page is still under construction. In our modern CAM Programming Course (PC FAPT-Cut i) we construct your Aspruchsvollen Erodierwünsche. Our customers are found in the following industries: * Auto, electric, plastic and toy industry * Plants, molds, machinery, model and tool Our strengths are: * Quality and precision * Short-term and timely execution * Balanced price / performance ratio * Customisable care Services Versions of any eroding * Electrically conductive materials and tools of any kind (steel, copper, carbide, aluminum, etc.) * Gearings * Erosion of copper electrodes * Rohplatinen * Mechanical engineering parts * Dies and plates for stamping, embossing and progressive dies * EDM and EDM Hole * Single and series production part Difficult workpieces and contours Some materials - especially the newer ones - can not always be processed with the standard technology because of its composition. Such difficult jobs are not rejected by us. They are seen by us as a challenge we gladly face with vigor and flexibility. Economically, although some trial use is not always feasible, however, our company is thus a certain level of knowledge of which is useful to us in other projects and in the future. We would be pleased to hear from them soon.

For over 30 years, we have been advising our customers from a wide range of industries on their sealing and insulation applications. Together, we develop tailor-made products that are perfectly tailored to the requirements of application, geometry and material specification. With a diversified warehouse and modern machinery, we can respond flexibly and quickly to customer requirements. Our machinery ranges from large and eccentric presses, CNC-controlled format saws, automatic punching machines and cart bar punches to waterjet cutting systems and cutting systems. With our machines, we process elastomers, fiber materials, graphite and foams and much more into high-quality products from individual requirements to series production. Our entire product portfolio and insights into our production can be found on our website www.kuhn-kaiser.com

Design and manufacturing of tools and devices for the working of wire, profiles and sheet metal: √ Design and job engineering, using CAD/CAM work station √ Punching, cutting, and bending tools √ Profiling roll tools for cold reduction of sheet metal strips √ Mechanical working (CNC-lathing, CNC-milling, grinding, and welding) √ Cooperation with companies dealing, among others, with wire-EDM of tool components, and multi-contour laser-cutting Products