Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

Adestra metalworking, flexible modern enterprise, the sheet metal and tube machining, and mechanical machining can offer turning and milling. We design, produce and assemble according to customer requirements: housing, terminals, machines, machine covers, custom solutions, components and assemblies.

Small and big serial production are currently the main focus of work, however Ironicon’s employees also possess several decades of work experience in custom production. Furthermore, the production of tools is also part of our profile. The vast majority of our products are made of aluminum, different types of plastic as well as rustproof and tool steel. Our plans for the future: Aiming for an increase in capacity, developing and enlarging the machine park is an important medium-term goal for Ironicon. As every firm relies on its employees, building up a good, functioning team is among the main long-term objectives. As part of the continuous expansion as well as in order to create a more livable work environment, steps are currently being taken to move in into a bigger, newer and more modern production hall. Ironicon Kft. was founded in 2015. Based on the founder’s national and international experience, the aim was to establish a modern, dynamically growing operation, with European standard and approaches. Only half a year later, a second CNC milling-machine was put into operation as a reaction to the drastic increase in orders. Thanks to repeated orders by regular customers as well the increasing of the customer base, Ironicon experienced constant growth from this point onwards, and was able to extend and modernize its machine park. When acquiring new machines, extraordinary attention is given to high quality in the measurement instruments and devices, for quality within adequate time can only be attained with quality infrastructure. By the third quarter of 2018, the work was already been done by four 3-axis machining centers as well as one 6-axis CNC longitude turner. All our machines can be controlled by Cam System, allowing a faster and more effective working process and eliminating the vast majority of production faults already before production. In December 2018 our firm came to another turning point when we bought two additional machining centers, which brought the total number of 3-axis machines to five. We also acquired our first 5-axis milling machine, which is also capable of manufacturing tolls as well as milling graphite. Punctuality and reliability are key to our success. Getting to know the customers’ needs and delivering the work with high precision and on-time are absolute priorities for our young, dynamic firm.

MAG is one of the leading providers of individual manufacturing and technology solutions with locations in Germany, the USA, China, India, Hungary, Great Britain and Switzerland. The group of companies unites traditional brands from the international machine tool industry such as Boehringer, Cross Hüller, Ex-Cell-O and Lamb. Since 2005, a global manufacturing specialist with unique know-how and an outstanding technology base has emerged. The group offers tailor-made solutions for the automotive and commercial vehicle industries and their suppliers. MAG supplies machine tools, manufacturing systems and services in the field of turning, milling and honing technology, system integration, automation, software, servicing and maintenance, retrofitting, e-learning and core components for machine tools. As an industrial supplier, MAG offers complete solutions including machining technology, process design and system project planning, right up to turnkey systems. The far-reaching understanding of production-related problems and a close, partnership-based cooperation contribute to the sustainable reduction of production costs in the target industries.

zepkon - machining production construction is an up-and-coming family-run CNC company in the Düsseldorf area. We offer services in the processing and processing of various materials. These include various stainless steels, non-ferrous metals and plastics. According to your information, samples and drawings, we implement your wishes in individual productions and small or large series productions. We are also happy to respond to your individual special requests. We are a competent and flexible partner for CNC turning and milling, for prototype and fixture construction as well as for medical technology. We attach great importance to the good advice of our customers, the perfect quality of our workpieces and assemblies and the punctuality of our production from a single source.

Werner Hübner GmbH is an SME in northern Germany and has been working as a contract manufacturer on the market since 1975. We have 30 state-of-the-art CNC turning and milling centers, three CNC sawing centers and a fully air-conditioned measuring room with four CNC measuring machines. Our 100 qualified and motivated employees are passionate about new tasks every day. We have a continuous improvement process in order to always be a pioneer in the market. Benefit from extensive know-how from the production of over 27,000 production parts of various designs.

Production of turned and milled parts in the Czech Republic. We deliver inexpensive small and medium series thanks to collective transport. Quality assurance on site. Delivery time: 4-6 weeks Active for the Swiss machine industry for 25 years, high quality standard.

As a company, we have over 30 years of experience in production by machining, heat treatment, thermo-chemical treatment as well as welding operations. We manufacture for the largest brands in the agricultural and construction machinery industry on the market. Aware of the importance of quality in production, we have developed the quality control process from audit and supplier qualification to a well-equipped laboratory that allows us to verify the structure of the material before entering the production process as well as to monitor the quality of production in progress on an ongoing basis. We manufacture single parts delivered to our clients ’assembly lines as well as provide the assembly service of units from parts manufactured in our plant. Our large portfolio of over 3,000 different products is being made in the 18,000 m 2 production hall. Precizo has an extensive machine park, which consists of the most modern numerically controlled machines, including Automatic Lathes, Milling Centres and conventional machine tools.

The mechanical engineering company with production on conventional and CNC-controlled machines With a large network of manufacturing partners and suppliers, we have access to an extremely large number of manufacturing methods, as well as processes, CNC machines and thus always free capacities and secure supply chains for your projects, which range from prototypes to series production and we have ours Support projects on schedule. Such a large spectrum allows both large components, as well as the smallest components, to be manufactured with the highest precision. You benefit from individual offers, short delivery times and competitive prices that we pass on to you. We have experience in processing a wide variety of materials. The materials are procured exclusively from qualified suppliers. A constant examination of the latest production technologies and materials enables us to recognize innovations and implement them for our purposes.

Founded in 1990, Imtec as a leading manufacturer of technical tools, quickly spread to other demanding markets and technologies becoming one of the top companies within mold making industry. It’s labor force is divided in two plants, one for tools up to 3T and the second one for tools up to 25T. In 2017, Imtec established a partnership with IT-MILL which increased even more its capacity with regard to rough milling, deep drillings and mouldbases. Currently, IMTEC provides solutions to its customers in order to ensure the most efficient and durable tool.

Custom manufacturing In view of our machine tools’ opportunity we can ensure the manufacturing of high-precision parts and the processing of small, medium and large workpieces. With our machines, which are suitable for 2D, 2,5D, 3D and 5D cutting, we are able to produce a wide variety of parts. For our technology we use various 3D-models, which are made available in our CAD/CAM-System by our customers, to increase our efficiency. Prototype Besides wage work, we undertake the initial manufacture of individual prototype products, based on model or drawing, machining optimatization including tools and technology. All machined parts are delivered including 3D coordinate measurement certificate. Device manufacturing Machining or measuring of complex parts may require various devices, therefore our engineers strive to develop the simplest yet most efficient devices. We have gained considerable experience through creating our own devices, which we use in single and series production. Our company undertake the design, production and installation of hydraulic and pneumatic devices as well. Serial production Our machine park is also capable of medium and large series production according to market demands. In series production, generally the most important tasks are the optimization of the machining time and the reduction of the non-productive time. During the processing we pay close attention to process safety and the use of the Poka-yoke principle.

P&M tools construction is a young company that was founded in 2018 by two mechanical engineers with many year od experience. The company was founded to offer the market new conceptual solutions, as well as to contribute to the development of the auto and machine industry. In addition, we deal with tool making, modeling and programing. We offer welding of complex assemblies as well as laser cutting of materials.

S&H Feinwerktechnik GmbH & Co. KG is your partner for CNC machining in the areas of 3 and 5 axis milling and turning with over 10 years of experience. Materials such as 1.4462, 1.3964, titanium, 1.4301 - 1.4571, Eladur, plastics are not unknown to us and we process them every day. We set the highest quality standards for our services for our customers in the fields of mechanical engineering, environmental technology, the food industry, pharmaceutical industry or defense industry, which we are constantly deepening through our in-depth expertise and distinctive expertise.

CNC milling 5-axis Similtan