InduGrind GmbH - Your tool grinding shop from Bochum In the centre of the Ruhr area, we offer you a competent grinding service for your tools and components. With InduGrind, we are breaking new ground to support you in the machining and production of high-quality cutting tools and components. Our focus is on you as our customer, as we take your challenges seriously and our expert team is happy to present customised approaches. The solution approaches start with the discussion of the respective application, continue with the production of a tool or component drawing and end with supportive advice on the use of your tools. In addition to providing expert advice on the use of tools, we are also happy to support you with tool management and maximising sustainability. We would be happy to present our solutions to you in a personal appointment. We offer you a personal pick-up service or, if required, dispatch with various logistics partners. If you have any questions, please contact us directly!

Cramer Schleiftechnik not only grinds, modifies, repairs and coats existing cutting tools, but we also manufacture special tools according to your needs and specifications, which are not yet available on the market. By professionally regrinding, coating or repairing cutting tools, you can significantly extend the useful life of tools and thus save considerable costs. With special tools specifically tailored to your production, it is often possible to combine several work steps. In addition to cost savings, this often results in shorter production times or higher production volumes in the same time compared to several steps with standard tools. With all our services, we clearly focus on your wishes and needs and react flexibly to changes or special requirements. Precision, quality and on-time delivery are a matter of course for us in all services.

Production profile Industrial service providers and manufacturers of capital goods • Development, design, manufacture, assembly and commissioning of components or complete systems according to customer requirements • Individual solutions with exact Manufacturing accuracy • Repairs, maintenance, conversion, implementation, expansion of existing machines and systems • Industrial service • Compressed air technology / service (specialized in KAESER compressors) • item pluspartner • Arms manufacturing license Main profile • Special machines, systems, aggregates and components for the capital goods industry • Filter systems for particle filtration • Container construction • Steel construction • mech. Machining workpieces • Refurbishment and revision of drilling and construction machines • Precision machining in automatic construction down to the zero dimension range • Production of weapon parts and complete weapons • Tool making • Production of analog film production systems Services etc. • technological steel construction • Assembly services for all chemical, pharmaceutical and production engineering apparatus and plant engineering • All types of welded structures • Profile construction • Aluminum profile construction • Industrial services • Maintenance, inspection and servicing of mechanical equipment • Tool repair (grinding, sharpening) • Repair of film and photo technical systems

Karl Ruhl Maschinenbau GmbH was founded in 1983 by its current Managing Director, Karl Ruhl founded as a sole proprietorship. Steady growth and continuous structure required in 1987 the use of CNC technology. In 1991 a new production hall was built, which was commissioned in November. Currently 8 qualified employees. Karl Ruhl Maschinenbau GmbH, production partners and suppliers demanding machine components, precision parts and special machines. An efficient, economical and high quality production requires high precision in all production stages. We consider the full range of CNC turning and machining technology available and are thus in a position to even complex parts economically, precise and inexpensive to manufacture. Our specialty: Production of individual parts; series parts, including all materials in steel, cast iron and non-ferrous metal sector. Production of machines and equipment according to your design and manufacturing drawings or documents. Meaningful integration of the entire production field, a good business organization CAD systems with integrated NC programming, DNC operation and the latest manufacturing technologies from leading manufacturers of machine tools and the use of advanced editing tools enable a very high-quality and effective production. Quality - punctuality - Cost effectiveness - performance be with us in one hand and the basis for the delivery of small and medium series of the highest quality at excellent conditions. From a simple part to complex requirements.

Sächsische Walzengravur GmbH has been producing high-quality rotary printing and embossing forms since it was founded in 1890. In addition to engravings for gravure, flexographic and screen printing, we also offer steel cores as well as a large number of technical rollers and services through our own cylinder production.

As specialists in the machining, we are able to handle all types of steel, non-ferrous metal and plastic. The SiTec is certified by BVQI § / DIN EN ISO 9001:2000-12. At the new location Korntal are 100 employees currently working in two shifts - and rising.

Welcome to the Edimexx GmbH ... ... Your reliable and quality-conscious partner in the field of CNC contract manufacturing Our core competencies are in CNC milling and CNC turning, with quality management and punctuality always have the highest priority. Whether complex, geometric or dimensionally accurate products. Thanks to our know-how and many years of experience in the CNC area, we manufacture your order like as a single piece, in small as well as large series. Translation by Google Translate

HOXHA & GIERSCH is an innovative company dedicated to customer satisfaction. The main focus is on quality, adherence to delivery dates and customer satisfaction. The repair of machining tools of any kind is our job and we are very good and experienced in this. Do you need a suitable tool, we will take care of it? No problem. Special tools tailored to your needs? You're welcome! Would you like to speed up your process, make one tool out of two? We will try to implement this! Prototype tools we are there for you.

Fresal is an Italian producer of solid cutting tools. With a wide range of standard tools, suche as solid carbide and HSS end mills and reamers, and solid carbide drills we can find a solution to your different needs. Half of our production is based of special tools, produced to solve your machining problems of any material and process.

Over time, our company has developed from a craft business to a modern industrial company. Starting with shiny turning and milling tools made from natural diamonds to to cutting and grinding tools made of polycrystalline diamond (PCD) and cubic boron nitride (CBN). In order to meet the high demands of industry, our machines and measurement equipment are state of the art and are subject to continuous development. Our high-precision tools are used in the automotive and aircraft industries, in the electrical and optical industries and in mechanical engineering.

From design to prototype and produce line, a comprehensive company Whatever the field of activity of a company, icts leaders from now on Should Have an obligation to do everything to AVOID leakage or dispersions customers possible. Review: The most common strategy is to position Itself on the market as a supplier of "global solutions", a generic term for a wide-range of services and benefits. The engineering office specializes in. technical hand by injection, CREOPP-TEC positions on the market All which can not only Provide the general solution to the original medical equipment manufacturing in the medical industry, the purpose aussi automotive accessories, toys, electronics, defense or cosmetics. Experienced technical experience over the years is to get all the additional knowledge. The company Operates since 1996 for the design and manufacture the Following The tools of all the field (injection / over molded, unscrewing, double injection for parallel and vertical 2K injection molding machine Blow molding gold...). If CREOPP-TEC subsequently assembled on a network of French molders, it aussi offers a low-cost industry with China Directly with our Chinese partner. Do not be dependent on technology goal INSTEAD take the best of each, this is the credo of the engineering office. From the stage of designing hand-TEC CREOPP CONSIDERS the eco-design and Provides referenced materials before the next simulation's phase. The rheological software Cadmould Rapid Could optimize the injection process and control the deformation. Not long after, in the stage of rapid prototyping and adjust the tool, development and industrialization icts on injection machine from 50 to 1000 tons, the company Will show the extent of icts different skills. For Having a final visual effect Quickly, the customers of CREOPP-TEC POSSESS lots of ways: such as stereo-lithography HR (High Resolution), the selected laser sintering (polyamide, Duraform HST gold Duraform Flex A6 steel or aluminum) or odd CNC rapid prototype, Vacuum Casting and RIM (Reaction Injection Molding - Process shaping thermosetting plastics).Finally, working on the industrialization stage encompasses all stages, it includes the assembly, painting, packaging, various checks and tests.

BAN-INOX is a family company, created as a successor of Mileks company established in 1990, which was engaged in the production of safe deposit boxes and post boxes in banks, mechanics for electronics, tools for PVC foil welding ... According to the changes in the market we are expanding our activities to equipping and decorating the interior and exterior of commercial and residential buildings, construction locksmith work, steel and stainless steel pallets and neutrals for the food industry. We have been doing our business under the name of Ban-inox since 2006. Since our establishment we have been making a variety of metal objects, and we have always provided our customers with the best service, quality and favourable prices. We successfully fulfil all the requirements of our partners with high quality and fast production, both individual and single solutions as well as large series. Our 34 years of experience in metalworking are the best recommendation, and our reference list is the best proof of this.

The production and the repair of cutting tools of all kinds, as well as the trafficking in and the round and flat grinding of materials of all kinds

Presentation of the company We are a company with a long tradition, which produces diamond (PKD) tools, hard tools, various purpose drills, cutters, knives and dedicated holders for various standard and non-standard tiles. We also produce various tools made of CBN material, which are used for turning and milling very hard materials. Company vision With precision, precision, speed and knowledge, we overcome the set goals, which are expansion, new collaborations and, above all, satisfaction of both old and new customers.

Your competent partner for polygons and complex components Our focus areas are the development of processing methods and machines as well as contract processing with our large modern machine park. We are a reliable partner to our customers and offer them application-specific and production-optimized solutions for their technical tasks. Since the company was founded, we have been working on the development of the ICTT non-circular turning technology, which today represents our unique selling point in the market. Our vision is to make a contribution to the conservation of resources by using optimal polygon connections. The ICTT process for polygon production is unique in the world The ICTT non-circular machining process for shafts and hubs was developed by Iprotec GmbH over many years and made ready for series production. This enables the highly economical production of almost any polygonal contours. Particular emphasis was placed on the fact that the process can be easily integrated into different machine concepts and that the process is transparent and easy to use for the user. Appropriate software tools support developers, work planners, machine operators and measurement technicians in using this unique machining technology.

Aficor is a Portuguese based company for the manufacturing of turning and milling pieces as well as woodworking and metal working cutting tools. We are an honest, credible and qualified company to answer with efficiency, speed and competitivity to the market needs. We work with partnership for our customers interests. Looking towards the future, we plan today with our expertise from the past.

ŽIČNA KOVINA d.o.o. (Ltd) was established in 2013. The company continues the 60 years tradition of high quality wire mesh and wire products of ŽIČNA CELJE, which was established as a daughter company of Yugoslavian Steel industry.Based on years of experience, monitoring and development of new technologies, the company now Successfully manages the development, production and sales of technical / technological advanced wire products and other products for industry and individuals. We are a company engaged in the processing and manufacture of various wire metal products from idea to execution. We are a young and professionally qualified team of people, which can cope with a wide variety of challenges. We are flexible and cooperative. Therefore, we want to work with new customers around the globe. Below you can find a brief description of our activities and products.

Your experts for welding technology from Limeshain Exceptional services and quality are always the result of thorough planning. Our work does not start in production, but always begins with the first customer discussion. We manufacture workpieces from individual components to complex welded assemblies. Our experienced welders are all tested according to DIN EN ISO 9606. Thus we produce qualitative MIG, MAG and TIG works Welding is our vocation Professional welding Where you need us! Your order is our priority! Whether on site in your company or in our production hall. Our welders are tested according to DIN EN ISO 9606-1.