Bergmaier Präzision has been a family business in the metalworking sector since the beginning of 1972. The focus is on the production of special and precision parts in which individual customer requirements are taken into account. Individual, prototype and sample parts ranging from the millimeter range to the meter size are thus manufactured in small batches. In over 40 years, the range of editing has grown and the program has become more diverse. Where turned and milled parts were initially produced in a small hall in the backyard, there are now two large halls in the industrial area, where turned, milled and eroded parts are manufactured using the latest technology (up to 5-axis simultaneous milling). Thanks to professional, qualified personnel and cutting-edge machinery, we developed into a progressive, innovative company. Since the company's activities are not only based on continuous improvement of production processes and the introduction of cutting-edge technologies, but also great value is placed on the environment and sustainability, there are photovoltaic systems on the roofs of the production halls and a large heat recovery plant also returns the otherwise lost energy. If you wish, we have all the necessary test documents and certificates for our products. The entire company is certified according to DIN ISO 9001:2015, which we have expanded internally to include an environmental management system (similar to ISO 14004).

The company Jakob Schäfer was in Kaiserslautern, Mühlstr in 1926. 9 of machinist - champion Jacob Schaefer founded. Mr. Jacob Schaefer worked in the tool room Pfaff , where he took his master's certificate in 1919. First founded Mr. Shepherd has entered the bicycle mechanic Guild, and worked as a guild master. It then bicycles and motorcycles were sold and repaired. Before the second World War II was furnished a cylinder grinding and turning shop. 1944 destroyed a bomb attack the entire operation including residential house and a shop. After the war, Mr. Schaefer from the ruins of an emergency shelter built with a small workshop. Companies - with the currency reform, the structure of today's "Shepherd" began. House and workshop were created again. In parallel with the vehicle sales and the turning shop was built, so that in 1950 the first jacks, the Federal Railroad Central Office, could be sold in Speyer at the time. The two operating branches vehicle and turned parts production had increased to 1955 so that the existing business premises were no longer sufficient. Therefore, in 1955 the purchase of a hitherto community-owned 10,000 square meters of grounds with a building of 300 square meters floor area and 200 sqm floor. The turning shop was moved to Weilerbach and managed separately from the vehicle sale as KG. As a complementary acted Mr. Jacob Schaefer, limited partners were Mr. and Mrs. Hedy Werner Hilbrath Hilbrath. Since 01.01.2001 is also Jutta scouring manager and responsible for business administration and the personnel office. As of 01.01.1982 the sole proprietorship was changed into a limited liability company. Managing partner was initially Dipl.-Ing. Werner Hilbrath. Since 01.01.1995 Mr. Mechanical engineer Rüdiger scouring held this position. Shareholders are Elke Palm, born Hilbrath and Mrs. Jutta Scheuer, bornHilbrath. In 1990 the office building was enlarged by 100 square meters. After the construction of an additional hall in 1998 the operation are around 2,500 square meters of covered factory area available. Currently, the annual turnover of 4.5 million euros at an average of 45 employees. The GL is based on German quality and the production does not outsource to neighboring countries. The rest of the year, the company under the slogan "Quality ensures the future"

Our electronic and mechanical production are to be employed in a position for you in the area of system construction. We assemble your PCBs, assemble and test your Baugrupppen and devices. We mill and turn your parts.

• Part-production according to drawings or customer specification • Assembly of parts to complex assemblies • Commissioning including functional control of these assemblies

We are a small flexible company in the metal industry. After many years of professional experience in the CNC - machining and programming of CNC - machines, the company milling Oliver Schlecht, in Rottweil (Baden Wuerttemberg), was founded in 2005. The company manufactures milling Oliver Schlecht contract work from prototypes to series production. Individual parts, small series, medium and large series are ideal for our horizontal milling centers with pallet pool. Manufacturing categories: * Axis CNC - milling (2 1/2 D - Milling, 3D - milling, milling of the rod and cast iron) * CNC - Turning * Machining of various materials such as non - ferrous metals, aluminum, brass, copper, stainless steel, V2A, V4A, tool steel, different plastics, titanium alloys and special alloys and cast materials.

Founded in 1949, PAVESIO MARIO S.r.l. has always worked in synergy with its customers, giving form, soul and substance to their desires. The experience, know-how and skills developed in over seventy years of working as a partner of small and large national companies and multinationals with production locations in Europe, North and South America, North Africa and Asia, manifests itself today in technology, quality and service.

Turning and milling work

Plast-Met CNC – Precision in Every Detail Plast-Met CNC is a modern, family-owned manufacturing company based in Cisew, near Turek (Greater Poland region), specializing in high-precision CNC . With over 14 years of experience, we deliver reliable, cost-effective, and top-quality machining solutions for clients across Europe. 🔧 Our Core Competencies: CNC Turning CNC Milling (3- and 4-axis) Drilling, Tapping, Reaming Machining of aluminum, steel, brass, and engineering plastics Prototype and series production 🏭 Modern CNC Machinery Our production facility is equipped with advanced CNC lathes and machining centers that ensure high accuracy, repeatability, and efficiency. Continuous investments in technology and automation allow us to meet demanding quality standards and tight deadlines. 👨‍🔧 Experience & Quality Assurance We are proud of our experienced team of engineers, CNC operators, and quality control specialists who oversee the entire production process – from technical drawings and CAM programming to final inspection. We follow ISO quality standards and provide full documentation on request. 🌍 Why Choose Plast-Met CNC? Flexible production – from single parts to large batches Competitive lead times and pricing Export-ready – fast and secure international shipping

We manufacture precision parts for clamping technology and machine tools, construction machinery and electric engines, plastics processing industry, medical technology, hydraulic and mold. Our company size is manageable. Small "water on the brain" is also effective production. A well-established team of highly qualified professionals working dynamic and creative.

We are engaged in the metal industry and have specialized in the processing of sheet metal and powder coatings.

The Spaleck GmbH & Co. KG is a medium-sized, coming from the engineering company, founded in 1869, located in Bocholt. Our company is family-run by the fourth generation. We currently employ approximately 135 employees at the site Bocholt and approximately 12 employees at the site Greiz in Thuringia. At these sites, we have a turnover of € 18 million. Contract manufacturing has increasingly gained in importance in recent years and this factor is well over 50% of revenue. In particular, the close cooperation with various gear manufacturers has helped us in recent years to considerable growth. For several years we have been certified according to DIN ISO 9001. Modern machinery, considerable investment and motivated and qualified employees meet these requirements. We currently focus both in the field of mechanical and sheet metal technology to the production of small to medium-sized workpieces. A close cooperation with various customers enables us to invest in state of the art machining centers for large parts and thus a significant development. We have recently made a decision to invest in three MAZAK turning-milling centers that take us from January 2010 in the position to manufacture large parts in high quality. These machines can process workpieces up to 2300 mm in diameter and up to 7000 kg deadweight and also perform milling operations with large distances. There are 3 type aircraft MAZAK Integrex e-1850 V. supplemented these machines by a 3D measuring machine.

Gresförder Laser Technology GmbH manufactures high-quality products that are currently available on the market. Since 1980 we offer our customers a first class service and help you achieve your goals. Our 27 years of experience and commitment to excellence have earned us a good name in the field of metal. The core competence of the Department of Metal is the design, manufacture and installation of stainless steel, metal and steel products. Running different projects allows us customer needs, to identify trends and technolgische progress early and this, respektivlich integrate according to our advice in the products. Our company distinguishes itself in the high quality segment: Custom made designer / private area, custom CNC-bent-sawn and recycling of stainless steel, brass, aluminum, steel. With us you get canopies, covers, handles, stairs, railings and doors exclusive advertising medium. Furthermore, we are engaged in contract manufacturing for industrial enterprises. Whether it's small or large series, is appreciated our reliability and fast response time. Very IMPORTANT to us is the consistent quality. Only those who can keep the quality is to exist at the present time also able on the market. Everything is possible in almost home Gresförder! For example, searching one that can provide you with turning and milling parts, no problem you ask us. You are looking for a company that your welding activities in wage work for you takes over, no problem you ask us You are looking for someone who will build a canopy and installed, no problem, they ask us to. You want to have what powdered or wet painted, and are currently not satisfied with your suppliers, no problem just ask at Gresförder. You want to get cut brass or other materials water jet where one asks? Of course at Gresförder As you can see, no matter what you are looking for, you can check the same in Gresförder, and they have one less problem! What we can not manufacture is done by our business partners, with the same care and quality as you would expect from the house of Gresförder. But in order that we can not just tell evidence, we have prepared some photos for you. So that you can see we do not just talk, but we keep our promises.

Our company specializes in tools for solid cold forming. We mainly supply screws manufacturers, furniture and automotive industries with CASE tools of hard metal. An overview of our facilities. Flat grind ·, clamping 300 x 600 Outside round grinding · D 290 x 500 Inside round grind ·, D 220 x 120 Depth unilaterally Milling ·, X 200, Y 390 way · CNC turning, D 190 x 500 · Erode, 2 D, X 290, Y 360 clamping Profile grind ·, D 100 x 150 · Hardening furnace up to 1200 ° C · Manual workstations for polishing surfaces Furthermore, for years we work with reliable partners in the field - Die sinking - Coating (CVD, PVD) - Special hardening process together

Edelstahlsägezuschnitte Plasma cutting Water-jet cuts Grind Foiling Stainless steel sheets Dealer Manufacturer Service Plasma Water jet Cold circular saws

Precision mechanics (prototype machining, small, medium and large series), Tooling,

Inno-Tec represents a clever combination of precision sheet metal and precision machining process in one company. All standard operations to specialized customization. Inno-Tec works by this combination innovative and cost effective. And of course, revolves around this quality. Quality applied in such a smart way that there is always existence of market outcomes. In short: quality where it belongs.

Edit Description Punch Powertrain is an international player, with a strong presence in Europe and China. In addition to the headquarter in Sint-Truiden, Belgium, the company runs 6 more R&D centers, located in Germany (2), France (1), the Netherlands (1) and China (1), allowing close cooperation with the customer and short communication lines. Economies of scale are achieved by concentrating production in 3 facilities in Belgium and China. Since 2013 Punch Powertrain is growing rapidly thanks to: - a continuous focus on quality improvement - a constant focus on costs - innovations in green powertrain technologies - highly-motivated and valued employees Our significant growth is driven by a strong focus on product innovation, with about 30% of all employees working in R&D. Our innovation focus has enabled us to develop revolutionary DCT concepts, which lead to new future business in new markets, such as Europe and India. Following the same rationale, Punch Powertrain established a strong position in the field of New Energy Vehicles, with the acquisition of Inverter specialist APOJEE in France and a number of Joint Ventures

Meska has been manufacturing precision components made of granite and metal with holistic application know-how for 60 years. The production is in our hands from start to finish, which is why we offer fast delivery times and high quality. Our work is popular in a wide variety of industries: in automotive, aviation and research industries as well as in mechanical and special machine construction. Applications include lasers, sensors and optics, UP technology, photonics, length measurement technology and logistics services.