JHM CONCEPT is specialized in engineering, design, production and installation of special purpose jigs and fixtures. OUR DEPARTMENT: 1 engineering office + 1 machining company A single contact your you with capabilities of two companies: the enginnering office JHM CONCEPT and its machining expert partner SODERTAL. For your needs, we develop, produce, adjust, qualify and deliver specific tools or parts. Our team: 6 engineers and 5 technicians are at your disposal to answer your problems. Our strengths : - Development of specific solutions - Prototyping - Machining - Cutting - Manufacturing Our philosophy: Provide French quality products at the best prices!

With our location in Haiger, we offer a complete range of services which, with relevant maintenance and inspection, help to shorten downtimes in hydraulic systems. When it comes to developing the right solution for our customers in hydraulic drive technology, Johannes Schäfer GmbH has been around for more than 30 years a sought-after partner. Many customers also appreciate our close partnership with large hydraulic manufacturers. This enables us to develop the optimal solution, both technically and economically. A very extensive warehouse, our reliable service and easy accessibility round off our service. The enclosed company brochure gives you an impression of our range of services. https://www.schaefer-technologies.de/wp-content/uploads/2020/05/schaefer-broschuere.pdf

Since 1990 Gerhard W. Ruppel-Hydraulik is operating in the hydraulic field. At the beginning mainly in the range of manifoldconstruction and production to customers specifications. Later the field of operation grows up to the complete hydraulic range: Trading with hydraulic components. Construction and production of manifolds, hydraulic units, valves and cylinders. Reparing of hydraulic components like cylinders, pumps and hydraulic units. Construction and production of hydraulic solutions to customers specifications. Production and trading with combined heat and power units (CHP).

tok Our trained specialists can provide assistance in all areas of automotive testing and high-precision manufacturing: Consultation on the product to be manufactured, engineering consulting Complete computer aided design Manufacture of electronic, pneumatic, hydraulic test modules and test tables with PC control

Preciflex service engineering is more than 25 years of expertise in CNC machining, pre-finished machine parts and function-ready modules. As a privately owned, medium-sized company, we produce approximately 25 employees on highly automated manufacturing systems. Our core competencies CNC milling and CNC turning, we are constantly developing. Activities, we are in the areas of drive technology, medical technology, aerospace, fluid power and general engineering. We produce according to your specifications and deadlines, with maximum quality and precision. Through our network of qualified partners we can offer all galvanic and paint and powder coated surfaces.

Veltech is an engineering & manufacturing company located in Turkey. With its wide variety of technologies (Machining, turning, welding, coating, sheet metal processing and Heat treatment) on its machine park, Veltech is an AS9100 certified supplier of Aerospace & Automotive companies.

ARGE Automation and Machinery was established in 2007 in BURSA, the capital of Turkish automotive industry. ARGE specialized in the design and manufacturing of special purpose machines, production and assembly lines and robotic systems. ARGE serves mostly for Automotive (%80) and White Goods (%20) industries. ARGE has also started new studies for Defence and Food industries. ARGE incorporates all design, machining, automation and programming processes. ARGE operates in its own facilities which have 2.500 square meters rectangle indoor area. ARGE currently employs 20 highly qualified and experienced staff (8 white collars, 12 blue collars)

We are a container construction company with 20 years experience and have in our production spare capacity which we would like to offer you. We are already working with German partners and can according to your specifications (drawings) correctly and inexpensively manufacture for you. Please send us your requests, we will make an offer Translation by Google Translate

Reuse of existing and proven machine tools up to complete production systems - through conversion, automation, overhaul, maintenance and relocation.

Production of hydraulic components from the areas of clamping technology, media routing, valve technology and others. The following clamping elements are offered: lever clamps, swing clamps, centering clamps, support elements, screw-in cylinders, block cylinders and pneumatic clamping elements. The following valves are available: time switches, sequence valves, throttle valves, pilot check valves, pressure reducing valves and various check valves. The following media couplings are also offered: coupling elements, multiple couplings and coupling units. We also offer pressure intensifiers, filters, hydraulic accumulators and various other hydraulic and pneumatic items. Furthermore we offer complete hydraulic control units and devices and fixtures.

As an industry partner, we offer a wide range of services. We provide assistance with repairs, maintenance on production machines and testing of work equipment. In addition, we offer our customers in-house fixture construction with machining and welding technology. If required, we can offer one-off production of spare parts including delivery and assembly from a single source, for example to repair an acute defect as quickly as possible. Individual solutions in production Handling tools - Lifting tools - trusses - Turning devices - transport devices exams - Lifts - Water squeegee - Shelving systems - ladders - Lifting equipment - DGUVv3 checks von der Heyde is certified - DIN EN ISO 9001 - DIN EN 45001 - DIN EN 1090-1 - DIN EN ISO 3834 In-house production - metal and sheet metal processing - turning, milling, drilling - surface treatment (external processing) - welding of individual parts and structures made of steel, stainless steel and aluminum - 3D measurement technology - Own design with Catia V5 or EPLAN - Automation solutions with Siemens Tia Portal and other PLC solutions

"A systematic approach to solution" The company PRO CNC GmbH & Co. KG was founded on 01.12.1990 by Michael Pfeiff under the name Michael Pfeiff. The company's headquarters was first in Varl and was moved in 1994 after Luebbecke. On 01.09.2003, the company was acquired by the current owner Volker Meier kink and then operated under the name Pfeiff toolmaking. Since 01.09.2013 we now operate under PRO CNC GmbH & Co. KG - Production Engineering and Mechanical Engineering. Mr. Meier is one kink with the company since the very beginning. The company PRO CNC GmbH & Co. KG deals with the full range of mechanical manufacturing (turning, milling, drilling, grinding) and the assembly of components and machines. Focus here is the contract manufacturing in the milling, especially the production of small parts. Cubic parts up to an edge length of 1000x600mm currently can be handled in-house CNC PRO GmbH & Co. KG. The company PRO CNC GmbH & Co. KG is able to deliver to the customer from the initial sample to mass production all.The range of parts includes the classic item to automobiles mass part. Is manufactured to eleven computer-controlled machine tools and machining centers the latest generation with up to four axes and two spindles. Some of the machines are equipped with rotary tables change. As a manufacturer, we would like to mention, among others, Bridgeport, Brother, YCM and Swabian machine tools here. The rotation range is among other things a lathe with driven tools, Y-axis and bar feeder (Biglia B650Y-turning diameter over bed max. 400mm) are available. Programming is based on dialogue and DIN controllers and by means of a CAD-CAM work on SolidWorks basis. Currently, the company PRO CNC GmbH & Co. KG two masters, a mechanical engineer, eight skilled workers, five assistants and a force in the commercial sector employs. The customer base includes about 30 customers from all sectors of the craft and the industry (electrical, mechanical, automobiles, pharmaceuticals, chemicals) in regional areas. Its customers include names like: VW, AEG, Federal Mogul, Faurecia (automotive sector) Harting, IMA, Kolbus, Oystar (engineering sector) VTG wagon Graaff, EuroMaint Rail (rail-rail vehicles) In May 2004, the company has been certified according to DIN ISO 9001-2000 since 2010, accordingly to DIN-ISO 9001-2008.

Company Profile Since 1991 Our family manufactures customized solutions made of plastic. In Gornau at Chemnitz today about 50 employees in the fields of semi-finished product processing, container and equipment construction, plant construction and cleanroom technology operate. Our solutions are used in industries such as machine and plant engineering, medical and environmental technology, the semiconductor industry and photovoltaics. The high quality of our products and services is evidenced by the certification of our company according to ISO 9001:2008. The internal design office as well as the technically and technologically advanced manufacturing guarantee our customers a comprehensive and high-quality advice and support. Involve us when planning your plastic just solution. Illustrate With our experience and the available CAD technology and we work out the best solution. We are happy to solve with our know-how your challenges. Products / Services Semi-finished processing Behälter-/Apparatebau Transparent Plastics Wasser-/Labortechnik Cleanroom technology Semiconductor engineering / photovoltaics Piping systems / special fittings Prototyping / Rapid Prototyping Machine technology With a well-equipped and very broad machinery, we can meet diverse customer needs. CNC lathe turning length up to 500 m 2 Milling Machine CNC 3-axis 1000 x 1300 x 160 Milling Machine CNC 3-axis 2300 x 1300 x 160 Milling Machine

Founded in 2021 as a 100% subsidiary of internationally active Planlicht GmbH and part of the “PlanlichtGroup” group of companies, we draw on over 35 years of expertise in housing and electronics manufacturing for the architectural and technical lighting sector. The highest standards in the area of sheet metal manufacturing for visible housing components determine our daily work. In order to alleviate the constantly increasing complexity across the entire supply chain, we offer, combined under one roof, a wide variety of technologies for the entire range of thin sheets, from powder coating to the assembly of complex mechanical and electrical components. Planfactory sees itself as a local solution provider for demanding partners

About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire

PASSION FOR ENGINEERING - since more than 50 years Heinrich Greve GmbH, based in Lübbecke, has been synonymous with innovative solutions in manufacturing technology since 1966. What began as a pure contract manufacturer has developed over the decades into a sought-after manufacturer of high-quality production units and technical rollers. Today, we offer a broad and flexibly adaptable range of manufacturing services – precise, on time, and customer-oriented. COMPETENCE THROUGH EXPERIENCE With over 50 years of industry experience, we are one of the established specialists in packaging technology. Our components and assemblies are used in numerous well-known machines – often unnoticed, but crucial to their function. In recent years, we have deliberately expanded our focus: we are increasingly specialising in the manufacture of rollers, large components and complex welded assemblies. Thanks to modern machinery and qualified specialists, we are able to produce even the most demanding components with the highest precision. As a second-generation owner-managed family business, we place particular emphasis on quality, reliability, and partnership-based cooperation. Our dedicated team provides you with expert support in implementing your individual requirements – from the initial idea to the finished solution.

CE-Z-MAK is a brand that carries the legacy of the past into the future and aims to maintain its presence both in Turkey and in international markets with its innovative solutions. Our goal on this platform is to develop our knowledge and skills and to pass on our company to future generations through stronger partnerships. Our company, which manufactures high-performance, durable, and environmentally friendly products in the field of agricultural irrigation machinery and deep well submersible pumps, continues to be a reliable solution partner for our business partners by combining technology, engineering, and family-based business ethics. Our capabilities: - Production of agricultural machinery parts. - Production of construction machinery parts. - Production of welded parts for steel structures. - Manufacture of hydraulic cylinders according to the force and speed of hydraulic presses. - Design and manufacturing of project-based welding, machining, and assembly fixtures, as well as prototype production. - We respect the designs and R&D work of the companies we work with, so we protect their designs with confidentiality agreements. For this reason, we take care not to provide details on our website.

• CONSTRUCTION • PRODUCTION • INSTALLATION • SERVICE • We are a family owned and powerful system provider with more than 30 years of expertise and experience. We offer design, production and manufacturing of equipment, assemblies, sheet metal parts, plastic parts and assemblies for a variety of industries and markets. Product range: Machines and equipment for X-ray technology and reprographics, medical diagnostics, medical devices, film development, photo development, IT industry, printing systems, textile processing. More product range for the general Machinery and equipment: engineering, equipment manufacturing, acquisition of outsourcing projects, assemblies, assembly, installation works of mechanical assemblies, component manufacturing, OEM products, cable assembly, stamping parts, laser machining, sheet metal, sheet metal parts, sheet metal parts, CNC sheet metal, sheet metal components, plastic parts, plastic processing, plastic welding, deep-drawn parts.

WASTEMA International Wastema has it´s headquarter in Veringenstadt on the Swabian Alb Alb. The Town lies in the idyllic Lauchertal, in the middle of Baden-Württemberg the homeland of the poets, philosophers and inventors. Wastema was established in the year of 1955, and is today leading manufacturer of high quality textile machines. Not only our bandknife machines are well-known in the whole world for their reliability. More than 20 years demanding use are for our products no curiosity. In order to constantly improve our products, we have generous development- testing an production premises at our disposal. With modern machenery and an own powder coating plant we achive highest quality standards connected with a flexible manufacturing.

For Tresoldi & Casiraghi, producing quality is more than a mission; it has always been a true passion. Since 1962, the year the company was founded, this passion has been reflected in the production of carpentry, which over time has won recognition on the Italian and international markets. A way of working that marked the transition from the craft dimension to the industrial and technological dimension in order to ensure competitiveness and offer only the best at always competitive prices. Progress has been made not only in terms of the number but also in terms of the security of internal processes and respect for the external environment. A success that is thanks to the daily commitment of a group of people who are able to look at the challenges of the future with the same enthusiasm as on the first day. The company employs personnel who specialize in welding, bending, stamping and assembly. The welding work is carried out by qualified personnel who have the following qualifications: WIG — MIG — MAG — ELECTRODE. We are also able to issue mechanical test certificates and non-destructive test certificates.