Company has used its long-standing knowledge and experience in civil production sector as well. The main part of civil production covers: welding of structures, their machining and assembly into final products such as traffic, constructional, handling and agricultural facilities. In 2004 more than 80 % of civil production had been made for foreign companies mainly from Germany and Great Britain. Continual investment into advanced machine holding, production workshops, experience of our businessmen, technicians, workers and very good relations with our customers are very good conditions for further development of co-operation production development. Over the last year there has been turnover of 2,5 billion CZK and positive profits. Currently there is 950 employees. Supervision of management, prescribed product properties and parameters are guaranteed by permanent quality control. The company has been certificated in accordance with ČSN EN ISO 9001: 2001, and AQAP 2110 standard and process of welding according to ČSN EN ISO 3834-2:2006 standard both connected with the company informational system. The company is a member of the Economic Chamber and a member of Czech NBC Team aliance (www.nbcteam.cz) operating under the patronage of Czech Trade - the national trade promotion agency. International highway routes, railway service and nearby international airport enhance company international business/co-operation. VOP 025 is situated in the middle of a large industrial region with a lot of companies able and ready to co-operate. Production of engineering parts of building and handling machines, production, cutting, machining, welding, assembly and painting. Welding certificate according to the EN 729-2

PROZAX Co.Ltd. was established during the Barum Continental Otrokovice side business privatization. Our main activity is machinery production, namely one-purpose machines and aplliances. The one-purpose operation producing appliances mentined above has ben running since 1965. After the privatization the production character was kept and it was then extended producing switchboards, electrical services and the one-purpuse appliances employed in other branches (e.g. plastic bags manufacture, steel structure manufacture etc.). Production of machine spare parts not made by PROZAX is another section of our production line. Our company assures the appliance manufacture, instalation and offers other services necessary. The main customers are Barum Continental Otrokovice and Continental Hannover. The highest quality of our goods is required and our company covers their requests. While manufacturing we focus on minimum breakdowness of our machines because of non-stop production business of our customers. That is the reason we use top quality material and parts of well-known companies such as (SKF, SIEMENS, BOSCH REXROTH, FESTO, INA, SEW and many others).

We are a medium-sized, family-owned company that produces technical plastic parts. Our customers value us as a reliable partner for the processing of thermoplastics. Subcontracting, injection molding, assembly, assembly, 2K, insert parts overmoulding

We are a contract manufacturer for small series and have specialized in the production of aluminum.

Wendt Engineering is a machinery supplier for the rubber, plastic, wood, automotive and packaging industries. We manufacture according to our customers' drawings, drawings of our own construction company MV automatic as well as our affiliated partner design offices. We produce individual parts, assemblies and complete systems or machines. Our departments wire the equipment, tubing to pneumatic and hydraulic. With our partners, we produce the cabinets and take control programming before. The machinery and equipment we provide internationally, operate, and take over the maintenance. If necessary, in the 24-hour service. Our customers get complete systems from one source. Through our tremendous opportunities in parts production - CNC milling and turning, our steel construction and our electrical and assembly departments we can react quickly and flexibly. Plant and machinery can be in our house completely erected and retracted before we take you to the end customers and take you there in operation. Please look at the entire spectrum as well as our machinery etc. on our webside at: www.wendt-maschinenbau.de to

The TAWESCO is leading producer of tools, metals stampings, weldments mainly for the automotive industry but also trucks, agriculture and forestry machinery, mostly heavy weldments including surface treatment and welding fixtures. Key figures: • All in one solution under one roof (DESIGN – TOOLING – STAMPING – WELDING) • Turnover about 78 mil. EUR in 2019 • 950 employees • Production area about 50 000 sqm in Koprivnice near Ostrava city • Tradition since 1850 as TATRA Trucks production • Quality management: EN ISO 9001:2015, IATF 16949:2016, VDA 6.4., ISO 14001:2015, ISO 3834-2 • CAD-CAM Capaility: AutoCad, Catia V5, Autodesk Inventor, IDEAS, AutoForm Tawesco competitive advantage: "All under one roof ": stamping + welding + tooling + design Stamping: • Metal and aluminium stampings for automotive industry up to 50 kg • Mechanical, eccentric, progressive and transfer presses up to 2000 kg • Press breaks up to 8 m Welding: • Weldments for automotive - spot and laser welding • Heavy weldments for trucks, agriculture, forestry and municipal machines • Robot, automatic, semi-automatic and manual welding • 2D/3D laser cutting Tooling and design: • Welding and machining jigs up to 15 m • Tools for forming, bending and perforation of steel sheets up to 50 T • Milling centres, drilling and grinding machines • Try-out hydraulic presses 1250 T and 2500 T Quality management: EN ISO 9001, IATF 16949, VDA 6.4., ISO 14001, ISO 3834-2. References: 1. John Deere, Kemper, CLAAS, KION- Linde Material Handling, Fenwick 2. TATRA Trucks, IVECO 3. SKODA Auto, Audi, VW, Bentley, Daimler 4. GESTAMP, SNOP, TIBERINA

We are manufacturer of complete operating and storage facilities. Thus we have a very extensive range of machinery, from simple cold circular saws, semi-automatic and fully automatic band saws, drilling machines, punching machines, eccentric presses up to 125 tons cutting pressure, hydraulic punching machines and punching machines, bending machines for profiles and sheets, plate shears for sheet metal press brakes (manual and CNC controlled), Ausklinkern, welders (MMA, TIG, MIG and MAG) for general structural steels, aluminum and stainless steels. We can also paint products (airless) or galvanize galvanic also in conjunction with partners, hot-dip galvanized or powder coated to offer. Installation work we can offer in too. This can also include electrical work, because we have our own electrician.

At LMV GmbH, we offer comprehensive industrial services in the areas of logistics, assembly and packaging. With our production area of over 1400 m² and an experienced team, we are your reliable partner for final assembly, device assembly, series assembly, as well as assembly and functional testing. We help you to reduce costs and increase efficiency through outsourcing. Our flexible capacities enable tailor-made solutions for a wide range of requirements. Rely on our expertise to optimize your production processes.

Rijdam hardfacing specializes in the treatment of surfaces with extremely hard, wear resistant alloys, In our workshop near Rotterdam we employ the following processes: – TIG – MIG –MMA – PTA – Powder Welding – Spray and Fuse – Wire spraying – Oxy-acetylene welding – Laser cladden (lasercarb® Technogenia)

Established in 1870, KRAFFT have become a reliable PARTNER in the paper industry. Today, our worldwide involvement caters for the needs of a multitude of industries and applications. QUALITY is our major aspect, which is why all our production is supervised according to the quality management standard DIN ISO 9001. This ensures that stagnation will not occur and that our customers can be assured that by choosing KRAFFT, you are choosing a progressive company. SERVICE is not a catchword to KRAFFT, but is the basis of our culture. With our own fleet of vehicles, we can keep our promise to deliver on time. Our highly skilled and experienced specialists have, at their disposal, a facility equipped with the most modern fabrication machinery. We have combined our experience of traditional mechanical engineering with the most up-to-date CAD design and the finite elements method. Coupled with the extreme competence of one of the leading suppliers, this places KRAFFT as being the ideal provider of rollers, drums, cylinders and, indeed, any heavy turning component. We are capable of producing rolls, grinding and dynamically balancing on a massive scale up to. - 5 500 mm Maximum Diameter - 15 000 mm Maximum Length - 130 tons Maximum Weight Repair Service KRAFFT are pleased to offer a roll repair service, including journal renewal, surface plating and dynamic balancing. Each roller, that enters the shop, undergoes a full inspection when the costs for repairing any reported defects are estimated. Erection Department We have a team of experienced fitters who are at your disposal. Our coverage is world-wide. As well as providing roll removal and installation, our team is highly proficient in work involving the modernization of existing plants and the dismantling and erection of production facilities. Project and Design Engineering Engineering has been at the heart of our business for 130 years. Our design engineers work with our customers in a close partnership to produce unsurpassed results. Whether the requirement is for rollers or for complete modernization of your plant, you can be confident in our assurance that we can more than meet your expectations.

QUICK INFORMATION FOR ASW GMBH Service in sheet metal forming of steel, stainless steel and aluminum from 0.5 to 25 mm Complete machining of punching, laser cutting, folding, welding through to finished growing Oberlächbearbeitung. (Powder coating, electroplating galvanizing, hot-dip galvanizing, etc.) Certified Enterprises by Qualtitätsmanagment DIN ISO 9001:2000 Environmental management ISO 14001:2005-06 Welding Credits: "Big sweat proof" DIN ISO 3834-3, DIN 18800-7:2002 With about 100 skilled employees, implement your small, medium or large series! With references in the craft, engineering and large-scale industry.

With advanced machinery and skilled employees, we are able to produce single pieces, small series but also large quantities according to customer requirements. Here, we place particular emphasis on quality, punctuality and flexibility. The areas of planning and production control are matched in the production processes in the company, that we can always respond quickly to customer needs. If you urgently need a part, we will ensure that you can meet your deadlines, because satisfied customers are our goal! With the renowned machine supplier TRUMPF as partners are our most advanced machines and technologies available which enable processing techniques such as CNC lasers, CNC bending with angle measuring system, laser welding and CNC nibbling precise tolerances. Furthermore, completes our production range by MAG / TIG / MIG welding of steel, stainless steel and aluminum as well as spot welding, beads and rounds.Likewise, opening up numerous small machines and the necessary production technology for sheet metal processing. We produce items today are used worldwide because our clients include not only companies in the region, but also globally active machine and automotive companies who rely on our knowledge and skills in the field of sheet metal processing. And rightly so, for 130 years speak for themselves! Our services for you: CNC laser cutting CNC nibbling CNC bending up to 5000 mm Aluverarbeitung Stainless Steel Processing Toolmaking different welding processes: Laser welding Spot welding MIG pulse -MAG TIG Drilling, milling Assembly

BICKEL - The synergy of courage & Tradition Bickel stands for perfection of form in metal and metal. In 1983 the company was founded as a locksmith. Already in 1986, it specializes in sheet metal processing and related In 1991 a new production hall, which was expanded and extended ever further over the years. Today manufactures Bickel in four department areas - Locksmith, Automatenbau, CNC sheet metal and sheet metal technology with the most modern machines high-quality parts made of steel, stainless steel and aluminum. 40 specially trained staff are available for the customer service and the implementation of projects. If you are looking for competence and professionalism in lasers, punching, bending, cutting, welding or surface processing, you are in Bickel exactly in the right place. See for yourself! Good idea, strong implementation From the design to the production stage - we manage your project from one source.We optimize the entire process, making it more efficient and therefore the final product cost effective. Of course, we guarantee a solution that is adapted to your needs. Computer-controlled processes ensure a fast and above all flexible manufacturing. Therefore, we are able to meet even the most unusual requests in the shortest time: whether as a single piece, in small or large series. For many years, we use a wide variety of parts for diverse industries. These include: construction, automotive, retail chains and mechanical engineering. Of course, we are also certified 9001:2001 for several years according to DIN ISO. Precision in laser technology We use two independently operating bystar laser cutting machines, one of which is equipped with a 3.5 kW and the other with a 4 kW CO2 laser. These produce the whole night through unmanned. This is possible by means of the concatenation of a fully automatic Bycell Storage tower concept. Through this concept, we are able, stainless steel up to 20mm to 15mm Standard tin and process aluminum up to 12mm as well as Plexiglas precise. We will basically cut by nitrogen to avoid trace oxides. In addition, we are able to process with our 5-axis 3D Mazak laser cutting system pipes, as well as deep-drawn parts. The inexpensive alternative: Stamping Technology With an automated Trumpf punching machine, we offer an affordable and flexible alternative to laser cutting. Coins, threads and passages can thus be realized. Bending technology, exactly With the 3-point bending technology Hämmerle and a maximum compression force of 200 tons, bending length to 3 meters, we process steel, stainless steel and aluminum sheets with the highest repeatability. other services • Welding: We control the welding process MIG, MAG and TIG. • Pipe Cutting: We process all round, square and rectangular tubes up to an outside diameter of 400mm. • Surfaces: Also on the processing and finishing of your products, we are well set. For grinding and deburring we have our own facilities. Development of techniques for other V - eg galvanizing and painting powder coating We also work with partner companies. The variety of products Our extensive range includes products and services such as: • Covers • Equipment and supply parts • Containers and Trays • CNC laser parts • CNC punching and nibbled • individual parts, small, medium and large series • Racks • Kom...

UYAR is the first choice for external system manufacturing. Our strengths lie in complex small and medium series. Foundation of our success are innovative ideas and their professional implementation. Our qualified staff ensure a customer focused service. We take for you to manufacture your precision, milling and turning parts to creating the complete product. Of course, we procure all popular add-ons. Whether prototypes, small or medium series, you can use our creative expertise in development, design and manufacturing. Based on years of experience with our suppliers, we are able to perform the required of you surface and heat treatments. Power spectrum Planning and development of small devices and modules Assembly and procurement of all major additional components CNC milling wage batch sizes from 1 to 500 pieces CNC Turning wage batch sizes from 1 to 2000 pieces CNC drilling wage batch sizes from 1 to 2000 pieces Job cutting up to Ø 250 mm Lohnentgraten of small parts As a system supplier we have access to a dense network of external, qualified partners. Uyar products move the world! Whether in the highest quality equipment for the production of aircraft parts or in high-precision medical devices - wherever precision is required, we are also not far away. Assembly Increasingly, equipment or assemblies are in our home not only designed and manufactured but also procured all necessary for this mechanical and electronic components from us. Of course we also mount on the installation plans or specifications. Surface finishing We take care of the entire production, including the required surface and heat treatments. All major non-ferrous metals, steels, stainless steels and plastics, the required material certificates are provided, processed and. Knowing what is important. To provide constant quality, is the prerequisite for a professional collaboration. The term quality is very important in our house.It includes all business and functional areas of the company and shapes the holistic thinking and actions of all employees. We test according to applicable standards and guidelines in measurement, on request, of course, according to the company standard of our customers by means of measurement protocols. For the customer, this means a close business relationship on the basis of the highest quality, flexible commitment, punctuality and mutual trust. Logistics and Shipping Our entire storage capacities PPS controlled and managed. Thus, we ensure continuous and sufficient stock. Within a small radius we provide for yourself, otherwise we work with renowned transport company together. In our manufacturing strategy optimal storage, fastest material flow, optimal logistics play an important role to delivery. We employ only highly trained professionals who work at a high quality level.Through targeted training and education we promote their expertise, but also expect equity initiatives in training. The commitment of the staff, their dedication, motivation and identification with the company are the backbone of our company.

The MHG Maschinenbau GmbH & Co. KG was founded in 2004 from the already since 1981 based in Saarbrücken company GGS by the managing director Michael Geörg. The engineering company currently has approximately 30 employees. Goods in the early years still forging and machine parts, the main products, today's capabilities include the manufacturing of gears, turning and milling parts, and especially the complete transmission manufacturing, from design through new production to maintenance and repair. As Saarland MHG company mainly supplies customers from the Saarland and Rhineland-Palatinate. But even in other federal territory, and in its European neighbors, there are numerous customers.

Maintenance, repair and rebuilding of construction, agricultural and production machines. Manufacture and installation of steel structures and special constructions. Welding work on new constructions and for repairs.

We are a company that deals with modernization, design and installation works, as well as performs relocation works. More than sixteen years we are engaged in the production of metal structures, installation of industrial equipment, modernization and relocation of production facilities in Ukraine and Europe. Our company manufactures any metal products to order according to individual drawings.