Thin sheet made to measure. As specialists in sheet metal products we provide for industry, commerce and trade series production, small series and patterns of all kinds. Our focus is in the areas of electrical and electronics industry, mechanical engineering, environmental engineering and in the optical industry. We manufacture custom-made, with the lowest tolerances and come join us: On your specific needs and special we can always respond flexibly. Most modern manufacturing equipment on a production area of over 3200 m2 allow us optimal and timely reactions from sketch and drawing in our design department or with your complete data sets. The machine park. We have a flexible and modern machinery, which enables us to implement different projects. It ranges from high-power laser systems via a stamped sheet metal machining center, CNC controlled press brakes, a fully automated bending center, wire straightening, to welding robots and manual welding processing with TIG and MAG. Laser processing Cope laser machining we. Onto our flatbed laser machine up to a size of 3000 x 1500 mm (steel up to a thickness of 10 mm, stainless steel up to 15 mm and aluminum up to 12 mm) The laser processing is connected to the fully automatic processing to a high-bay warehouse. Punching Cope in the large punching we steel up to a thickness of 4 mm, stainless steel up to 3 mm and aluminum up to 4 mm. The stamped sheet metal processing center is also connected to a fully automatic high-bay warehouse, which realizes loading and unloading. Automatic bending work Our fully automatic bending center with integrated Cutoption allows the edges of short-limbed profiles. The maximum bending length is 2540 mm. The maximum height of 254 mm and the maximum plate thickness 3 mm. Manual bending work Our only CNC controlled press brakes allow the folding of the smallest geometries up to the maximum bending length of 3100 mm, with a maximum thrust of 170 tonnes. Judge Our part straightener made possible by their 19 straightening rolls the production of low-tension and fine flat products. The maximum passage width is 1250 mm. The shortest leg length 100 mm, with a maximum thickness of 0.5 to 12 mm (depending on pressure). Automatic welding processing Our welding techniques are implemented at the TIG and MAG processes that allow us the welding of steel and aluminum. Our Nine-axis welding robot has a working range of 2500 x 1400 mm. An integrated removable turntable can position the working ranges freely through 360 degrees. Manual welding processing For manual welding processing, we employ a variety of welding equipment, welding tables and system. The machining on the welding table system can be realized up to a size of 3000 x 1500 mm. Press-and Joining Technology Our press-fit technology processes all standard self-clinching fasteners, leading manufacturers.The spot welding systems allow the joining metal sheets up to a thickness of 3 mm. Our joining technology is completed by connecting liquid form (clinching) and various riveting. Surface treatment For our products we offer a wide variety of types of surface finishing (eg, electroplating, powder coating, electro polishing, chrome plating, painting, silk screen) to. Through our partner companies this can be achieved quickly. Assembly To complete the products we carry in ...

Milling and Turning Services

We are a powerful and flexible medium-sized partner in all aspects of sheet metal work and mechanical galvanizing coating. Since 1888, we have steadily expanded our production depth and can now run with about 80 employees, both single and serial orders flexibly, quickly and with high quality. Short-term appointments are familiar terrain. Competent partners support us in many areas, such as electroplating and powder coating, with the same flexibility and quality. In sheet metal processing, we can look back on decades of experience and have a powerful, modern machinery. We handle small, medium and large sizes (1500x3000 mm), folding is up to 4000 mm possible. Sheet metal parts are manufactured in every imaginable shape and of course with the highest precision. Laser cutting, edging, stamping, welding, and many other procedure we maintain. Metal spinning is another of our method.Even for simple work such as beading, beads and rounds we have the appropriate equipment. Applied welding processes are electrodes, MIG / MAG and TIG. The materials of black metal, structural steel, stainless steel (V2A, V4A) and aluminum are processed. The production of sample parts and support to the production stage are also among our specialties. We offer reliability and quality of smooth sheet metal to finished coated and if necessary up to the mounted component at a high level. Of course, we are certified to ISO 9001:2000. Our quality management for all processes is continually evolving. Our services in the field of corrosion protection are hot-dip galvanizing, Kleinteilverzinken and mechanical coating (Mechanical Plating, also known as a mechanical galvanizing). Our galvanizing plant is well equipped for galvanizing of large and small series as well as individual parts and small parts. The High-temperature has been proven for many types of small parts (stamping parts and threaded parts).The high durability of the products goes hand in hand with the excellent corrosion protection provided by hot dip galvanizing. Our success is based on the reliability and durability of our products, which are processed by the hot-dip galvanizing and mechanical coating. Mechanical coating is particularly interesting for small parts made of high-strength steels. We also offer the Almac coating. For further information and offers we like are available.

Our company based in Upper Austria is a powerful partner in machining manufacturing. We specialize in 3-axis and 4-axis milling — from single-part production to mass production. In addition to milling technology, we also offer the production of turned parts in small series. Our range of services also includes welded components, including mechanical post-processing. With a dedicated team of five specialists, we guarantee high quality, flexibility and on-time delivery — regardless of whether it involves simple components or complex assemblies. Our goal is to provide our customers with tailor-made solutions from a single source.

Construction 2.5D and 3D burn weld glow radiate CNC milling and boring machines to 10to

DebaTec UG (haftungsbeschränkt) is your reliable partner for the procurement of CNC milled and turned parts. As an owner-managed company based in Uhingen, we specialize in the efficient and cost-optimized supply of medium-sized mechanical and plant engineering companies in Germany. Our particular unique selling point lies in strategic cooperation with selected production partners in Bosnia and Herzegovina. In this way, we provide our customers with significant cost advantages without compromising on quality and delivery reliability. All manufacturing partners are carefully audited in accordance with European quality standards and have state-of-the-art machinery. Our portfolio includes: - CNC milled parts and CNC turned parts made of aluminum, stainless steel and other materials - small and medium series - Tailored procurement solutions, tailored to your internal purchasing and production processes DebaTec UG (haftungsbeschränkt) focuses on transparency, reliability and cooperation based on partnership. We understand the challenges faced by German SMEs and provide you with the flexibility and efficiency you need in global competition.

We are a medium-sized mechanical engineering company that was founded in Hamburg in 1948 and is now run by the third generation of Mr. Jan Rohde. The team consists of 45 highly motivated and qualified employees who are happy to demonstrate their skills to you. Our state-of-the-art machinery and many years of experience enable us to manufacture complex individual parts, small series, assemblies, devices, test stands and special machines. A production area of 1300 m² is available to you, so that we can also implement large order volumes.

Outsource the welding process? We offer quality, flexibility and on-time delivery.

Your contact for machine building We at IPROTec GmbH are a young, rising company in the industry of special purpose machine building with worldwide operations. Our strategic core region is Central Europe. We specialise in the development, construction, planning, manufacture, assembly and commissioning of machines and systems that we design optimally under holistic consideration of the customer’s specific environment and with the greatest possible expertise. Our competence lies above all in classical special purpose machine building. We have planned and successfully completed many projects for numerous customers in the past. In every project, we place great value on perfect coordination with the respective customer. We discuss current issues to make sure we always know where we stand.

EW-Tec is an engineering office for mechanical engineering with its own production. We also offer the associated construction, calculation and simulation.

Our goal is to increase the effectiveness of your company. Be it with design changes or small changes in the production process. In collaboration with our certified partners, we also offer complete assembly and welding services. For more, you are welcome to find out more on our homepage.

Karar as being a family company has superior knowledge based on personel experience of its founders. Not only personel competency but also cultural improvement gained till the begining of the company improve abilities of Karar combining professional approach of its founders and dynamic performance of its organisation. Karar, with its team and with the mixture of all these forms policy of Karar for commercial business, for the enviroment and for the whole Globe. Mission of KARAR is to design and produce innovated and tecnological machines and components of machines for business of its customers in order to perform their studies in more efficient and economical way.

Trade Below Take for pipeline and plant specializing in the field of stainless steel processing. certifications: - Pressure Equipment Directive HP0, - WHG - DVGW Main business activities: - Piping and metal construction in water / wastewater, environmental - Piping and equipment for biogas plants - Manufacturer of tubular heat exchangers and double pipe heat exchangers - Manufacturer of pipe fittings and special parts - Manufacturer of special containers - Factory production with welding - Factory construction - Container solutions Containerised - 15 experienced installers for installation services

The MBS A reliable partner in metal Metal Schneider is a medium-sized company that has been established in the year of 2009. Our product range was initially contract manufacturing in sheet metal processing and the stair and railing construction. The strong growth in the early years, we decided to take over the brand logiroll in 2013. Through our highly modern machinery such as a laser cutting machine, the production of logistics Rollcontainer fits perfectly into our product range.

We have over 18 years of high production and materials expertise in sheet metal & tube processing. We put in innovative technology combined with the expertise of our staff of 40. We continually invest in modern production tool in the development of our employees. Modern machinery and 3D CAD-CAM systems are for us for years, of course, as well as our IT system that meets the current standard. In the processing of high-quality materials such as stainless steel and titanium, we continuously develop new manufacturing processes. Due to the technology and product portfolio, our customers see us as a full service provider and problem solver for sophisticated and custom products.

We are pleased to introduce Next Level Robotics - your expert partner for advanced metalworking. With two decades of industry experience and a team of highly qualified specialists, we are the first port of call for precise and reliable manufacturing services. Our comprehensive service portfolio in the field of CNC solutions covers the entire range of state-of-the-art machining technologies: - CNC machining centres: from versatile 3-axis machines to high-precision 4- and 5-axis vertical machining centres that realise even the most complex geometries with maximum accuracy. - Specialised machining: Precision lathes and milling machines, wire erosion (electrical discharge machining) for the finest cuts, horizontal boring machines and specialised Swiss screw machines for demanding small parts. - Sheet metal processing: State-of-the-art laser cutting machines as well as bending and folding presses for flexible and precise sheet metal processing. We also offer you a comprehensive service package that goes beyond pure machining: - Welding: professional welding solutions for robust connections. - Heat treatment: Optimisation of material properties for maximum performance and durability. - Coating & painting: High-quality surface finishes that combine protection and aesthetics. We attach great importance to offering you not only excellent quality standards, but also attractive conditions and comprehensive availability.

Manufacturing without limits: turning, milling, eroding, grinding, engraving, laser marking, ... benefit from our hughe and various collection of machines on four locations. Your stock stads by us - over 4.000 materials, alu, steel, stainless steel, titanium, tec. plastic, ceramic-glass, ... We twist for you - ask for impossibilities, our sheet metal forming realizes it. The word is colorful - our longterm experience of perfect surface finishes. Quality is no accident - our optimized quality management. Save paper, time and nerves - the best quality in the right place at the right time, all from a single source. We look forward to all questions, not only to inquiries. For more than 30 years Mühlbauer AG has been a proven partner for the provision of high quality precision components. It all started with a small lathe, from that we have developed into a globally operating company, which realizes all wishes concerning precision around the globe. From consulting, construction and prototype construction via manufacturing including surface finishing up to the installation of complex single components or whole machines, we have everything you will need for an optimum result.

Lasers A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages: We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately. Bending Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses. We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure. In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts. Welding Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free. As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum. We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting. Edit Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems. The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts. Surface As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it. Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available. Labels can be designed as a laser marking, engraving or the screen printing method.