Founded in 2021 as a 100% subsidiary of internationally active Planlicht GmbH and part of the “PlanlichtGroup” group of companies, we draw on over 35 years of expertise in housing and electronics manufacturing for the architectural and technical lighting sector. The highest standards in the area of sheet metal manufacturing for visible housing components determine our daily work. In order to alleviate the constantly increasing complexity across the entire supply chain, we offer, combined under one roof, a wide variety of technologies for the entire range of thin sheets, from powder coating to the assembly of complex mechanical and electrical components. Planfactory sees itself as a local solution provider for demanding partners

In small series production and in the area of prototype construction, we are your strong and reliable partner from planning and development to subsequent series production. Among other things, we produce special parts for a wide range of applications and finalize product ideas right from the initial design stage or technical sketches. At QUABUS, we create real products from ideas, develop solutions for new requirements and produce individual pieces as well as scaled series for special parts.

Glatec is your reliable partner for manufacturing subassemblies from metal. Glatec collaborates with companies from the electronic, machine building, home appliance and furniture industries. Glatec is one of the leading producers of fittings for beds and kitchen appliances in Europe. Our production is set up for manufacturing components and subassemblies in order quantities from 5000 to 500’000 articles. This allows us to react promptly and flexibly to your requirements. We focus on processing sheet metal, varying in thickness from 1 to 5 mm, coils up to 400 mm wide. We operate three automatic feed presses with a pressure range from 630 to 2500 kN. For separate operations, presses varying from 100 to 2500 kN in force are available. Stamping, bending and progressive dies are designed and produced in our own tool making shop. We also produce our automation solutions inhouse. For quality assurance 3D measuring equipment is available in-house. All CNC controls are linked into the company network. Programming of the machines is done with NX CAM Express.

Versatility - through years of experience and openness to new ideas. Today MOUNTAIN METAL OHG was founded in 1980 by Mr. Alfons Berg as a sole proprietorship. In 1994 the opening of a branch factory in Oberwiehl and thus the expansion of the power spectrum in sheet metal processing. The establishment of a partnership made in 1999 by the introduction of the individual enterprise and the participation of Mr Andreas Berg, who since 1993 has been an employee of the company. Managing Partners are Alfonso and Andreas Berg. Dedicated and technically skilled staff, supported by a powerful technical equipment enable quality and on-time reliable results that meet the individual requirements of our customers. With the sum of our experience of over 30 years, creativity and flexibility, we develop optimized overall and advanced detail solutions. Robot Welding Welding Welding Robot welding welded constructions sheet metal forming sheet metal processing milling turning machining sheet metal structures large milling parts assemblies burnouts combustion engine burning operation Abkantarbeiten cut profiles industry profiles structural steel welding welding TIG MIG MAG Stud Welding Drawn Arc Capacitor discharge machining stainless steel engineering tool steel plasma cutting plasma system plasma cutting parts sheet steel processing 16Mo3 Hardox 1.4301 1.4571 1.4404

Our company specializes in the design, manufacturing, and installation of custom-made, small- and medium-series sheet metal and machined components, industrial metal structures, custom machines, and production fixtures, along with the preparation of related manufacturing documentation. With over a quarter-century of professional experience, a team of highly skilled experts, and a state-of-the-art machinery fleet, we are dedicated to meeting all our partners' needs.

We are company with family traditon. The most important thing for us is quality of our products and ofcourse satisfaciton of buyers. In our machin park we have: -AMADA LASER (which is up to all requirements of today's market) We are using two different lasers. One only for inox/aluminium and second just for steel. -AMADA PUNCHING MACHINE VIPROS 368 KING (One of the best punching machine on the market, with extream precision and speed whis is up to all tasks. And have 33 Tons of preassure. -AMADA BENDING MACHINE ( Our machine have 8 AXIS so there is nothing we can't produce) WELDING (We are welding all materials INOX/ALUMINIUM/STEEL with TIG and MIG/MAG Procedure) As a company we like new challanges. We are able to produce all kinds of products from start to their final look. We are always trying to make the best for our customers. Mail: lukamarkun@inoxsystems.si Tel: +386 70 896 933

JOBO Spezial-Maschinen GmbH was founded in 2012 at the Vechta location. A manufacturing facility with an associated office building was built here in 2015. As a young company, JOBO would like to establish itself as a manufacturer of machines for the national and international market in the near future. Particular attention should be paid to the optimization of existing and the development of new concepts for machines for use in swamp or moorland areas. In addition, JOBO will deal with systems and equipment for the oil field industry, pipeline laying and controlled drilling technology. JOBO will work out the customer-specific special solutions that are often required here together with the respective customers. JOBO's range is supplemented by the areas of procurement and trading of equipment and devices from the above-mentioned segments on the international market. JOBO employees with the necessary experience in the respective specialist areas are available to implement all of these tasks and goals. In the future, JOBO will continue to supplement and expand the workforce with competent employees. JOBO hopes to be able to offer young people an apprenticeship position in the future

Our brand: Laserzentrum Bermatingen Are you looking for support in the design, development and production of a laser and bent part that is individually tailored to you? Are you looking for a partner for the production of a wide range of bent sheet metal parts and complex welded assemblies who meets your requirements down to the last detail? Then you've come to the right place. Because our in-house design with the latest laser systems and outputs of 4.5 kW, 8 kW and 10 kW, as well as the connected Remmert sheet metal storage system (storage capacity 600 t), we can respond flexibly to your requirements. As a result, we are able to process and complete your orders within a short period of time — even for small and medium-sized batches. We are happy to offer you everything from a single source. Come to us!

For many well-known customers, JP-Industrieanlagen has been the Partners for solutions. We are a national and international company in the field of special machine construction, automation technology and contract manufacturing. Everything from a single source and with the highest precision and reliability. Our delivery portfolio: • Contract manufacturing, parts to be machined according to drawings (build to print) • Construction and construction of assembly aids, assembly devices and clamping devices, • Construction of base frames, frames, consoles, turntables for robot cells • Turning and milling in our own turning and milling centers • Welded constructions for the highest demands • Welded constructions for static and dynamic loads according to DIN EN 1090ff EXC 1...2 / ISO 3834, for black steel, stainless steel, aluminium. • Large part processing • Optical measurement and testing • Construction • Engineering • System integration • Assembly • Services Your advantages with us as your partner at your side: From the first consultation to the realization of your project, JP-Industrieanlagen GmbH is your partner for solutions. .• From the first consultation to the realization of your project, JP-Industrieanlagen GmbH is your partner for solutions. • We offer you alternatives for cost-effective production/implementation of your production orders. • We support you in reducing costs and adding value to your production. • We also automate your manufacturing and assembly processes in the context of Industry 4.0 • We are a full-service provider and deliver everything from a single source, independent and flexible, not tied to a specific manufacturer.

Since 2019, our company has been producing components according to customer requirements. Predominantly these are welded constructions with or without machining and surface treatment.

The program. Successful. In the stamping and forming technology, we develop and produce the highest quality parts excellent tools individual technical solutions. For decades we have been supplying global partner with best quality. Also known customers from the automotive industry value our precise work and our great quality awareness. The roots. Robust. The stable roots of Josef Hafner GmbH go back 60 years. Since then, the company has not only grown steadily, and the know-how has been expanded constantly critical.

HERA - SOLUTIONS IN METAL Bent wire parts, stamped bent parts, cold extruded parts

With our many years of professional experience in the metal industry and our good knowledge of CNC turning, we also offer welding technology such as WIG and MAG. We advise our customers from planning to final assembly and guarantee a professional end result

The family business Schüttler Technik has been active in industrial sheet metal forming and apparatus engineering for more than 40 years. With around 85 employees, we create all conceivable products for our customers - innovative, skilled, and always with the highest quality. Demands and technology in today's sheet metal forming sector are constantly changing, while quality standards continue to rise. Our entire industry is caught up in a rapid development process. Schüttler Technik is always willing to face these dynamic challenges head on, and make the most of these new technical opportunities. Since Schüttler Technik was founded, we have always relied on state-of-the-art technology. Our great willingness to innovate has paid off. Especially for our customers, who can always access a portfolio of services which always keeps up with the times.

Geerds Anlagenbau is the competent partner when it comes to demanding workpieces in single or series production. As a specialist for small to medium series, we stand for precise components - individually manufactured according to the respective customer requirements. Our state-of-the-art machinery and our experienced team of around 30 qualified employees guarantee the highest possible quality standard for every CNC production. The strength of Geerds Anlagenbau is the comprehensive range of services. We offer our customers manufacturing of the products, assembly of sub-assemblies, powder coating and packaging & delivery according to customer-specific requirements.

As a family business, Stil Textil was founded in 1997 in Istanbul. The founders of the company later realized the great opportunities that the market for laser processing offers and as a result, the current company Stilteks Metal was founded in 2012 at its current location in Beylikdüzü. Thanks to the high quality of its products and services, the company is ISO 9001 certified since the first year after its founding. As the amount of the orders were rising, the company remained on the course of growth. Today Stilteks Metal owns a strong machine park consisting of 3 laser cutting machines, 3 press brakes, tube presses, milling machines and welding machines in an area of 1700 m2 Today Stilteks Metal with its experienced team provides support to its partners in various industries from automotive to construction industry. We create orders according to the wishes of our customers and advise them with our know-how during the entire process of the production. The company offers services such as laser cutting, bending, milling, welding and assembly.

Covering an area of about 3000 m² was established in 2001 in the industrial area Rossau OT Seifersbach a production facility for the manufacture of fireplace inserts and stoves with 800 m² size including appropriate office and staff facilities.

RTC Engineering is a globally operating technology company based in Slovakia, with a current team of over 140 professionals specializing in various fields such as Engineering, Precision Machining, Welding, Project Management, Assembly, Surface Treatments, and Integration. Our technological capabilities include: 12 CNC Milling machines (6 Five-Axis Milling machines) 5 CNC Turning machines 2 EMD Cutting machines Flat & Round Grinding Quality Inspection (2 CMM Carl Zeiss, Hexagon Scanning Arm, etc.) TIG Orbital & Manual Welding (20 welders) MIG Welding (20 welders) NDT Inspections Heat & Surface Treatments Assembly (Mechanical, Electrical, Pneumatic, Control Cabinets, etc.) Integration & Testing At RTC Engineering, we are committed to delivering high-quality, precise, and innovative solutions to meet our clients' diverse needs. Our state-of-the-art equipment and experienced team ensure that we can handle complex projects with efficiency and excellence. We pride ourselves on our ability to integrate various technologies and processes to provide comprehensive services from initial concept through to final implementation and testing.

Well-known customers worldwide rely on the high quality and best standards of Haslach group. From the company's history out Haslach has a deep understanding and knowledge of the materials used. This extensive experience is rooted in the minds of our more than 200 employees - and we are proud of it! For a successful company are good employees, each and everyone is looking for a specialist in the field. So it creates the Haslach group regularly to set new standards in sheet metal, steel, stainless steel / aluminum and composite materials technology. Company founder Helmut Haslach makes now with his 30 years of experience as general manager for strategic decisions in the company. Since 1999, supported by his daughter Marita Haslach-Then. A second generation graduate economist for Commercial Affairs With over management in 2005, she is responsible for staff development, purchasing, organization and investment. A year later, Jürgen was then appointed as the third manager who drives forward the innovative, highly complex designs. The Haslach group has for many years from their own apprentices. We are a qualified training company, and an intensive youth development is very important to us.