Liegau-Augustusbad is located in the vicinity of Dresden/Saxony, with perfect logistical connections to the motorway and Dresden airport. The Company’s manufacturing area is around 26,000 square metres and has been producing a wide range of moulded rubber components since the early 1900s. As a result, we have gained extensive knowledge in the field of rubber processing and parts manufacturing. Due to the fall of the DDR, the Company was later privatised in 1991, with large investments made in a more modern manufacturing process and extension of the machine park. The KET has currently around 50 highly skilled and motivated employees, enabling us to work a 3 shift system in order to fulfil our customer’s needs, whether it’s a Simple form or a complicated Moulding, we aim to please. Through our quality management system DIN EN ISO 9001 and DIN ISO 13485 certification. We are able to guarantee a very high level of customer satisfaction and quality of our products. Our technology department control and monitor the preparation, introduction and implementation of our production processes according to clearly defined specifications. The most important operating procedures we use within our production processes are: • 3-D-printing/Plotting • compression moulding process (CM) • transfer moulding process (TM) • injection moulding process (IM) • injection transfer moulding process (ITM) The vulcanisation operating processes are carried out in semi and/or fully automatic machining cycles. We also offer a number of procedures and technologies for the post-treatment of produced products (finishing): • thermal post-treatment (Curing) • mechanical post-treatment (low-temperature deburring) • manual post-treatment (hand deburring / assembly) • covering and coating processes We manufacture parts from rubber compounds such as EPDM, NBR, SBR, CR, ACM, NR, FPM, IIR, MVQ and LSR (silicones). All of which have received clearance from the automotive industry, as well as KTW and DVGE clearance for the food and pharmaceutical industries. In addition to rubber vulcanisation, we also manufacture a large quantity of thermoplastic elastomers (TPE). Another key feature of the materials sector is the use and manufacture of recycled rubber granulates from various basic elastomers The equipment and control systems of our Machine Park reflect the current state of the art in engineering, thus Enabling us to meet the future requirements of production engineering. We can manufacture parts from less than 1 Gramm up to 4,5 Kilograms.

Since 1986, IPV injection has specialized in the development and production of plastic injection parts For over 35 years, we have acquired recognized expertise in many sectors of activity: automotive, construction, packaging, furniture, food, electricity, plastronic, cosmetic, microbiology IPV injection is part of a family holding company, and has remained a reactive sized company

Our company is one of the few that combines both steel roll forms and aluminum extrusion presses. We specialize in manufacturing steel and aluminum profiles, as well as components, and we offer a wide range of surface finishes - including anodizing, powder coating, galvanizing and more. We also have technical skills in mechanical processing, sheet metal processing, tube lasers, welding, injection molding, EPDM and 3D printing. aluminium profiles, extrusion • EN AW-6060 • EN AW-6063 • EN AW-6005A • EN AW-6082 • Hardness levels T3 — T4 — T5 — T6 — T66 • Other alloys 1xxx, 2xxx, 3xxx, 5xxx, 6xxx, 7xxx • Bolt diameter up to 10" • Lengths up to 14,000 mm surface finishing • Anodizing • powder coating • Design coating (wood effect) • brushes • Polish Mechanical processing • Saw fixed lengths & saw miters • Drilling • CNC milling • Stamping • Laser processing including tube laser processing • Assembly of module components • E.g. parts for the PV sector, clamps, roof hooks, fasteners for trapezoid, solar pipe, solar holder steel profiles, roll profiling • Wall thicknesses: 0.50 — 5.00 mm • C, Z, U, Sigma, Omega profiles • solar profiles (piling posts, purlins, rafters) • uncoated material (S235, S355, S420, S550, etc.) • coated primary material (ZMxxx/Zxxx) surface finishing • Zinc plating • powder coating Mechanical processing • Saw fixed lengths & saw miters • Drilling • CNC milling • Stamping • Laser processing including tube laser processing • Assembly of module components More services • sheet metal processing • 2D, 3D laser processing • Tube laser • welding • EPDM and injection-molded parts • Rapid prototyping, 3D printing • Interim storage and logistics solutions

The Julamp GmbH is an innovative company that make reliable and dynamic with modern and flexible corporate structures and highly automated production equipment which the backbone of our efficient production. Our strengths lie in the field of development and production of Kunststoffspritzgiessteilen. (Including rework or Module assembly). For them, we produce series parts in standard plastics (PS, PE, PP, PET, PVC, ...) or in engineering plastics (ABS, PMMA, POM, PC, PVDF, ...) for the electrical, construction, cosmetics and the food industry .... Our goal is to build relationships and maintain in a partnership relationship.

The company ASS Maschinenbau GmbH ASS Maschinenbau GmbH was founded in 1983 and offers around 120 employees a challenging and attractive job with prospects and topics of the future. ASS serves the gripper parts and EOAT market worldwide and has been served locally by >ASS End of arm Tooling Inc. located in Plymouth, Michigan. ASS belongs to INDUS Holding AG since 2002. The employees in Overath and partners around the world develop intelligent solutions for various tasks in the fields of automation and robotics. The mechatronic ASS gripper parts are all developed, designed and produced at the certified climate-neutral location in Overath. The quality management is of course certified according to ISO 9001:2015 and all affected products take into account the EC Machinery Directive. The product range includes mechatronic gripper parts, robot hands (EOAT), automation systems, 3D printing, FRP handling and ultra-lightweight construction and is rounded off by various services. ASS offers customized solutions for everything to do with injection molding and automation for manufacturers and suppliers in the automotive, e-mobility, lightweight construction and plastic injection molding industries. Everything from a single source As a German manufacturer with over 40 years of experience, we supply customer-oriented and high-quality EOAT components or complete solutions. The areas of application range from individual mechatronic components to complete turnkey solutions. This is made possible by the ASS robot hand construction kit, which contains over 2,000 mechatronic components and the supporting over 6,000 special gripper parts. This extensive modular system enables gripping solutions to be adapted to the product areas and production processes of our customers. ASS automates, among other things, complex work processes in the plastics processing industry and handling solutions for components made of composite materials. Our components and automation systems are used to handle everything from the smallest plastic parts to complex interior and exterior parts. A lot is also possible in the areas of electromobility. For example, from individual cells to finished battery packs or from small plugs to entire e-charging stations. As a contact person for your individual tasks, we are at your disposal for a non-binding consultation. Contact us by phone on +49 (0)2206/90547-0 or by email at info@ass-maschinenbau.de

"Success is what drives us, quality is our obligation" As a medium-sized, owner-managed company, we design and produce solutions from thermoplastics for various branches of industry. And that for over 25 years now. Competently. Flexible. Successful. It is a long way from the idea to the finished product, which can only be successfully trodden when all factors for production are optimized and harmonize - from the idea, the individual development and construction by qualified employees to reliable logistics. Prototyping and the latest process technology are just as indispensable as the right materials and tool concepts. Everything at the highest quality level. Guaranteed. Certified.

Welcome to SOARPLASTICOS, Lda.! With a team of around 40 skilled professionals, we specialize in thermoplastic injection services, providing our valued customers with top-notch 1K and 2K injection solutions. Additionally, we offer assembly services for components, tapes, and more. Certified under ISO 9001:2015, our company is committed to delivering services of unparalleled quality while keeping competitive pricing in mind. To achieve this, we boast a modern fleet of machines, featuring units with clamping forces ranging from 40 to 900 tons. Among these, we proudly include two-component injection and gas-aided injection systems. To streamline operations and reduce costs, a significant number of machines are equipped with robots, enabling shorter shot cycles and minimizing part handling. At SOARPLASTICOS, we approach projects with dedication from their early stages. We are more than willing to collaborate with clients during product development, offering valuable insights to achieve the most suitable geometries for stable and efficient processes. In essence, we strive to find the best-fitted solution for each client. Our expertise lies in producing plastic components, often incorporating metallic inserts. To ensure comprehensive service, we partner with specialized external vendors for finishings such as painting, cataphoresis, or chroming. Moreover, we excel in complete system assembly, meticulously adhering to supply plans, many of which are conveniently received through EDI. Over time, we have heavily invested in bi-component technology. Today, we boast Engel machines with clamping forces ranging from 400 tons to 600 tons, designed to accommodate tools with inner kinematics, robot transfer, and more. -- Exciting News! Our commitment to environmental responsibility and the global energy challenges we face has motivated us to venture into self-production. Presently, a considerable portion of our energy requirements is met by our very own photovoltaic park. With favorable conditions, we envision fulfilling our entire energy consumption through self-production. Thank you for visiting us at SOARPLASTICOS. We are proud of our journey so far and look forward to continuing our mission of delivering exceptional services while embracing sustainable practices. Should you have any inquiries or projects in mind, please don't hesitate to get in touch. Together, let's soar to new heights of excellence!

Dear Sir, Dear Madam, EL-SAN KAUCUK METAL SAN.TIC.LTD.STI. is a supplier of molded rubber parts, plastic and metal parts to predominantly leading manufacturers of sealing systems and machines in Europe. With over 30 years of experience and customer-oriented production, we strive to continuously improve our processes and skills. This is our company philosophy based on performance and quality. We at EL-SAN (production) - E.K.S. (export) work exclusively with high-quality materials from a wide range of different elastomers, which are processed professionally and with the highest precision. Production at the latest technical level and according to international standards (Din, ISO) is a matter of course and guaranteed. Thanks to our flexibility and expertise, we always meet the wishes and requirements of our clients. Our customers trust in our long-term experience, quality, accuracy, speed and on-time deliveries.

zwerenz industries characterized by high quality standards that are realized by the coincidence of experience and development. All parts are manufactured in Germany. Motivated employees and flexibility and allow a high level of customer service a reality. The use of modern communication technology enables our officers a constant flow of information on project and production levels. Die-cast zinc / zinc die casting The hot chamber die casting machines, used zinc die casting ensure reliable production with consistently high quality. You can reach clamping forces from 75 kN to 700 KN for castings with a gravity of 0.05 up to 1,000 g. As a standard alloy we process ZL0410, also called ZnAl4Cu1 or Zamak5. We can, however, other Zinkdruckgußlegierungen such as ZL0400 ZL0430 or are possible. Thanks to optimized production processes also extremely thin-walled castings with excellent properties can be produced.To realize topics such as material and weight savings for the customer is the in-house mold design available incl. This can already be in the ground floor each font, so pass on the railways in the tool so that a fault-free production and an optimal result is achieved. Plastic injection molding Plastic parts made on modern machines - this makes it possible to process highly sensitive plastics efficiently. Our machinery consists of injection molding machines with clamping forces from 25 to 100to. Due to the largely automated production creates the basis for a flexible, cost-effective and environmentally friendly mass production. Through the in-house mold with design department can already be in the planning and development of the railways invest so that an optimum Ergebis is obtained by an error-free production. Additional Manufacturing Technologies • Veredelungs-/Kennzeichnungsverfahren like: pad printing or laser marking • Installation and commisioning of assemblies • encapsulation of metal parts with plastics Materials used: All common thermoplastics suchExample: ABS, PA, PA6.0, PA6.6, PC, PE, PMMA, POM, PP, PPN, PS, etc. The materials may be colored by the master batch pigments. Toolmaking In the field of tool we offer our customers a comprehensive portfolio of services. We distinguish ourselves above all by our high standard of quality. This is made possible by precision in all operations. The implementation of individual customer requirements, flexible order handling and a high level of customer service are basic requirements that we can provide. Laser Technology / Laser inscription The modern way of laser marking enables the processing of almost all materials. Many of our machines working in CO ² methods by which incorporate by laser beam headings, or similar motives in the works. With this method it is also possible to cut from materials desired contours. Another lettering style is achieved with YAG lasers.This technique allows the marking / engraving of almost all types of metal. The third area is the lettering in the color change process dar. Here materials are used which change by the addition of specific components by marking with laser technology at the appropriate place their color. In zwerenz industries is in this future-oriented field of work by one of the leading companies in Europe. Conceived at the highest technical level of machines and the technical personnel employed enable the implementat...

Prototypes and small series • Modern manufacturing processes • Own construction • Own programming • Interfaces for most file formats • Measuring and testing equipment • Sample and test reports • Short ways, fast reaction times • Qualified Employees • Individual service, handling and logistics • Reliable and cost-effective • Milling 3-axis • Milling 5-axis simultaneously • 5-sided machining in one clamping • prototypes • From the item to the small series • Air-conditioned measuring room Short ways and quick decisions. uncomplicated and pragmatic. That's what we stand for. That's our style. Our customers appreciate that we are solution-oriented, even with demanding tasks. Feel free to give us a call. We look forward to you.

Natec is your partner, from development to series! Both large corporations, as well as growth-oriented Mittelstaender. Whether the market leader in the industrial or service, or those who want to be. Our clients come from all sectors of the economy. In order to meet the current needs and demands of the market, we can provide tailored solutions for your business. We take care of the complete supply chain: planning, procurement, quality testing, warehousing and transportation. For years with much success, as our ever-growing customer base proves. As a service provider with its own production and development, we have the know-how and have the right partner for cost-effective procurement and flawless logistics. The basis for the positive development of recent years is the interaction of these flexible partner and our motivated employees, the resulting rapid Arbeitsablaeufe, a competitive pricing strategy, and of course the central storage at Natec. Our production partner here in Turkey are medium-sized family, far from the expensive and congested mass manufacturers. We know our partners for years and appreciate their design and manufacturing expertise. Through a comprehensive supplier management system is at all times the best supplier opted and appointed for your product. These are continuously tested for quality, delivery and price down. We and all of our manufacturing partners are ISO/TS16949 9001:2008 or DIN ISO: 2009 certified. You always have the possibility here to visit the production facilities in Turkey and to form a personal impression of the technical equipment, processes and working conditions in the respective producing for companies. Your benefits at a glance: - Reducing your supplier through Central Shopping on Natec - This reduction in the planning and control effort in your purchasing department - Cost optimization through market-based purchasing and delivery by bundling - Providing the highest quality in accordance with DIN ISO 9001:2008 / ISO / TS 16949:2009 - 100% delivery performance through warehousing - Short delivery times The satisfaction of our customers is our top priority, so us a trusted and personal contact is so important. Contact us for your strategic partner in Turkey!

Since 1945, the name Kappich - as a family business in its third generation - for individual products of the highest quality. Are manufactured injection molded plastic parts from all thermoplastics and plasticized PVC, which the electronics and find eg in medical technology, the automotive industry. Modern injection molding machines produce in a clamping force range 15-200 t Plastic parts of 0,5 g - 360 g This robotic systems for optimal production processes and consistently high quality care. Additional services include metal inserts, heat embedding of M3 and M4 threaded bushes, printing of plastic parts in the pad printing process. In mold less extensive tasks can be implemented in a timely manner internally. For more complex issues we draw on proven partnerships in order to obtain best results and rational solutions.

Additive manufacturing with fibreprint: From design to construction to implementation! Regardless of whether you need a functional prototype, a small or medium series at short notice - we will implement your project holistically together with you. Benefit from our high-quality, resistant materials. From tooling to manufacturing - our cost-efficient and diverse 3D printing processes for your production parts are characterized by their precision and surface quality. Services: construction + Creation of 3D printing data + Data check of your print data + Optimization of 3D printing data production + Rapid prototyping + Rapid tooling + Rapid manufacturing installation + Individual parts to assemblies + Finished components + Pre assembly / assembly Let's tackle your project together! Send us your ideas, data and requirements. Choose material and quality.We will make you a non-binding offer and get back to you within a few working days. Material overview: Materials for every application Thanks to the large number of our 3D printing processes, we offer materials for every area of application. Our materials convince with very good technical properties and perfect surface quality. Find out more about the four material groups and their possible uses. In the case of high mechanical component loads, we recommend the integration of continuous fibers such as carbon or kevlar. We are happy to support you in choosing the right material and advise you on the most suitable printing process.

The operation of Antares is a family owned and was founded in 2008. The professionals of this plant have ten years of professional experience in the production of experimental tools for stamping and forming. This professional experience was acquired in Germany. Production is CNC - machine equipped as the construction with CAD / CAM. Today we focused on the production of single and serial parts in the automotive industry and mechanical engineering. Through our experience and dedication, we guarantee good work, quality and reliability

As an efficient partner for your success, HEWI offers broad-based expertise along the whole route to your product, from the initial development through to series production. Your vision: From the design to the series product • Starting with a model or a drawing • Transfer into our 3D system – Siemens NX / CATIA • Design of the product as an economic injection moulding • Rapid prototyping • Material selection and testing, strength calculations • Working through requirements specifications – preparation of performance specifications • Design FMEA Your requirements: Comprehensive project planning • Definition of all specific characteristics, requirements and quality objectives • Preparation of a production plan: Logistics from raw material through to delivery • Advance quality planning, process FMEA, test & inspection planning • Definition of all resources, supplies and auxiliaries required • Purchasing, installation, enabling, training, process validation • Comprehensive project management: Customer requirements, scheduled dates/deadlines, costs Injection moulds • Fill analysis with Mold Flow: analysis of weld lines and stresses • Selection of the ideal mould concept • Thermal analysis of the product: distortion and dimensional stability • Mould design in 2D and 3D • Definition of the required process monitoring: sensors and scanning systems such as HB-Therm Flow or Kistler pressure sensors • Mould production in Germany or with worldwide partners • In-house mouldmaking From the preliminary sample through to series production • Product support from the first-off tool parts until handover to series production: tests, samples, changes, assembly trials, automation • Verification of process capability • Comprehensive testing options due to in-house laboratory and measurement & test room • Revision of the process FMEA: Feedback to the design phase • Clearing and start of series production: Presentation of the initial samples with test reports Company facts & figures • More than 70 injection moulding machines: 22 to up to 1600 to (DEMAG, Ferromatik, Arburg, Engel, Krauss-Maffei) • 550 employees • Our own brand products and manufacturing of different engineering plastic products • Automation: articulated robots, linear equipment, dying equipment, driers, assembly lines and assembly machines • Production methods: standard injection moulding, 2 and 3-component technique, mono sandwich, gas injection technique, moulding in inserts made of steel, plastic or electronic parts, in-mould decoration of films using the „SKIN LINE“ process • Production of high-quality surfaces: painting/enamelling, electroplating and coating with partner companies • Assembly of subassemblies, welding of plastic products, printing and assembling through to the finished sales packaging • Delivery to the customer: Use of different container systems and worldwide delivery Certified quality • Certified by EN ISO 9001:2015 • Environmental management by EN ISO 14001:2015 • Medical devices by EN ISO 13485:2016 • Energy management by EN ISO 50001:2011 HEWI Heinrich Wilke GmbH Bereich Kunststofftechnik Hagenstr. 2 | 34442 Bad Arolsen-Mengeringhausen | Tel.: +49 5691 82-735 | Fax: +49 5691 82-712 | info@hewi.de | www.hewi.com

Hügen & Lange offers you an extensive range in the field of thermoplastic plastics technologies. We manufacture injection molded parts for you in series production, support you in the development of tools and let our tool designers develop them to the finished series part. The tools are maintained and repairs carried out in our own tool shop. In addition to series production, we offer extensive services in series assembly. We help with the development of assembly machines, we also have them built according to your wishes in certified specialist companies and are at your side with a lot of knowledge and competence. With the highest Industry 4.0 standard, we offer paperless and glass production. All data is recorded digitally and can be made available in real time at the customer's request. We are also a DIN ISO 9001: 2015 and IATF 16949 certified company. We always keep our finger on the pulse and know about the continuous change of the market and the technical possibilities. In order to support you in your plans and projects, we offer you extensive and individual customer service.

Gronbach has been developing and producing components and complex assemblies on a production area of over 20,000 m2 with 290 employees since 1964 and has also specialised in the processing of stainless steel and aluminium, surface finishing and plastic injection moulding. In addition, a separate department is dedicated to the development of new surface technologies, manufacturing and assembly processes. The core competencies of the Wasserburg site are in the following areas: Metal processing (bending, milling, deep drawing, drilling etc.) Surfaces (anodising, powder coating, printing, laser engraving) Plastics technology (hybrid, back-moulding) hybrids instrument engineering development work PRODUCTION TECHNOLOGIES AND PROCESSES In the area of production technologies, we have specialized primarily in the surface refinement of stainless steel and aluminum, the production of functional and visible components as well as plastic injection molding and adhesive technology. These technologies form the basis of our equipment technology, but are also offered by us as individual services. We are constantly expanding and renewing our portfolio with new combinations of technologies and materials, e.g. in the art of back-moulding metals such as aluminium and stainless steel with different plastics, in order to be able to offer our customers high-quality and cost-optimised manufacturing processes.

Our services at a glance:  Intelligent inflatable seals "eCOREseal"  Molded seals  2K molded seals (plastic / elastomer, e.g. molded sealing lips)  Extruded profiles  round cords  Hose rings  cuffs  Special materials with approvals (drinking water, food, pharmaceuticals and hygiene EHEDG)  FFKM, FKM, EPDM SILICONE, NR, SBR, NBR, HNBR  Training for technology and buyers in the field of sealing technology Sealing solutions - a holistic approach Thanks to many years of experience in the field of sealing technology, we offer our customers comprehensive advice in advance, through the physical layout and design of the seal, right up to the first sampling and ultimately series monitoring. By analyzing your purchasing behavior, we can help you slim down your purchasing portfolio. Our customers bundle inquiries and thus also the costs in the area of sealing technology.

For thirty years, the name is Pliessnig for creative product development and solutions in the field of thermoplastics. Experience, a high-tech equipment and one hundred percent quality of produce. Intensive development work and functional reacting ideas are our strengths. Small but very specific products, we export 50 percent of our high-quality goods. Customers include global corporations in Asia, the US and Europe.