Our Firm was born 40 years ago and we are specialized constructor of rack’s and gear’s, we have over 100 machines and cover surface of about 4000 square meters. RACKS PRODUCTION: For Sliding gates: 30x8 M.4 L=1000/2000 30x12 M.4 L=1000/2000 22x22 M.4 L=1000/2000 30x30 M.6 L=1000/2000 30x20 IN NYLON without steel bore Industry Use: from Modul 0,5 up to Modul 30 on square and flat section with straight and helical Toothing until 6 meter Based On Customer Drawing: Rack finished on drawing with Hole’s, Induction Hardening etc.., On Carbon Steel Natural or Quenched and Tempered, Stainless Steel ecc... Our flexible corporate structure allow us to product one or more quantity very high flexibility respect the customer urgent. In recent year we have do more efforts for innovate our machines for obtain high precision and constant ripetitivity thank: • CNC Toothing • CNC Straightness to allows obtain straightness tolerance until 0,1 mm/mt • CNC Milling and Drilling until L=4000 • CNC Teeth Grinding in Quality 6 GEAR PRODUCTION: Our gear productions are based only customers drawing’s and small quantity(from 1 up to 200 pieces) Gear’s, Shaft’s, Pinion’s: from Modul 1 up to Modul 30 straight and helical toothing Diameter max 3200 Grinded toothing until Modul 10 and Diameter max 800mm Bombed toothing profile until Module 8 diam. Max 350mm We hope that our production are interesting for you and we are available for you to all answer and you are welcome to visit tour production line in Italy.

www.mzo-arndt.de

We are still in the start-up phase. Are only active since 01.10.2017 as a subcontractor in Dortmund.

Serres Gear Factory has been a family business for over 50 years, always combining tradition and modernity in its services and products. Therefore, the Serres gear factory is always very close to its customers and suppliers, as well as the delivery of high quality products.

The company, based in betting rings can look back on a long history: founded in 1945 by Heinrich Annas, the factory produced in the past, especially pre-finished machine and spare parts for the textile machinery industry. In 2007, Ludger drop man the shops and the company now manages in the future: As a reliable supplier for industrial companies is Anna's engineering today items as well as machinery and equipment for various industries forth. Due to the increasing demand for vendor parts for wind power and biogas plants in the area of renewable energy has become increasingly important.

MARIK Enterprise is a company located in Ferrara near the Motorway A13 in two warehouses, covering a total area of 4000 square meters. 19 employees working in factories cleverly divided into several working departments. The division into departments of production has been formed over the years to consolidate the business objective to provide finished parts complete with all the processing steps that is ready for assembly. This choice, or to specialize in providing complete and not on a single processing stage, was originally a necessity, due to the very poor fabric of the area, but over the years has become the distinctive feature and raised in Marik compared to the competition because it allows to reduce costs, the lead time and to improve the service and the final product. This also means that, although working under contract, the company is not a simple sub-supplier, but a major partner for those companies wishing to use more energy into marketing their product without having to worry about the appearance of production. The main product that realizes the Enterprise Marik is the steel shaft in all its variants: worms, sprockets, from trees to trees from electric motor pumps, keyed to the shafts by pins to ball screws. In recent years, then grew the experience in the construction of gears (gears) of modules especially important. The production is aimed primarily at small and medium size series of medium-heavy, but is perfectly capable of absorbing the large number being technologically advanced and automated well. Finally, the technical office established in 2006 to study the orders at the order constituting the cycle, and better support the customer during the development of prototypes or propose solutions for improvement in case of production standards. To ensure its products, Marik, has within it a standard room with CNC measuring machines that allow them to certify its product based on customer specifications. In three words Marik is TECHNOLOGY EXPERTISE AND SERVICE.

Our company - comes with a wealth of experience Unger GmbH & Co KG was established in 1932. Founded by our "company father" Bruno Unger in Leipzig. Having described ourselves as a traditional company for a long time, a completely new production and administration facility was built in the Hellerwald industrial zone in 1986. We are clear about what we have to offer: Decades of experience. And, of course, blades and wear parts for printing and packaging machines, which meet German quality standards in the best possible sense. Unger "family life" - always at the forefront Speaking of the best possible sense, you can count on the "Unger family" to provide all the advantages that a family set-up has to offer: Employees who have been with us for decades, who grow with us and have complete commitment to us and our products. A team that puts its heart and soul into the company and benefits from continual further training and development. And a working environment where motivation and commitment are taken as a given. Familiarity also means that we are always accessible and our customerservice is unsurpassed. We don't feel like a large corporation, more like a small, high-quality traditional company that delivers manufacturing of unsurpassed quality and high standards with fair and transparent pricing. Our production - quality with tradition You can be sure that our team understands its craft. But that's not enough on its own. Our results depend on quality materials. Therefore we offer a wide range of steels - from simple strip steel to high-alloy blade steel. On top of this, our partners supply us with excellent machines enabling us to achieve the best possible results. We also work with custom machines, built exclusively for us. And: What once began in our company as punching technology has now given way to precise laser cutting. This makes us even better. And we want to continue to be so in the future. So we ensure continual quality improvement - by investing in progress, but also innovation, for example, by developing our own identification system which allows us to trace when a blade was produced, at any time. And because we are so keen on quality, we also have products from 3M in our range as a result of taking over the Southern German agency in 2012. You can also rest assured: We carry out cutting trials with every new blade manufactured in-house - this in-house inspection ensures the quality of our products.

COMPANY G.S.I. Ingranaggi was founded in 1970 in Reggio Emilia, operating in the market as a company specialised in the construction of high-precision gears. The experience gained, the continuous technological innovation and the training of highly qualified staff allow G.S.I. Ingranaggi to satisfy the requirements of all its customers. Covering diversified sectors, the company has developed highly flexible production systems suited to diversified production, from small and medium batches to mass production.

CORPORATE DEVELOPMENT WALTER HENRICH GMBH - the partner for development and production of formed and machined parts made of pipe and solid material. Since its founding in 1959, the company has posted strong commitment by all employees and through continuous innovation and investment in efficient production process, a successful company history. In the development and implementation of new technologies and thanks to excellent client service by our dedicated team, we have set ourselves the highest level of customer satisfaction as a task. The aim of the corporate philosophy of WALTER HENRICH GMBH is specializing in technically demanding products. This orientation is with the use of all of our know-how to benefit our customers and partners.

Spring-loaded rotary encoder mounting bracket DHAF 8580 You know the application of these measuring units from your DIY store. When you buy a carpet, the metres you have to pay for are measured automatically while unrolling the carpet. The measurement is done by a measuring wheel which moves synchronously on the carpet and shows the number of metres removed from the roll on a small display. In the industrial sector, where high precision is required, this is realised by using high-precision measuring systems. ABP-Antriebstechnik manufactures and supplies the appropriate components. Our new inhouse-produced spring-loaded rotary encoder mounting bracket DHAF completes the product range of rotary encoder accessories of ABP-Antriebstechnik. After successful introduction of the measuring wheels with 500 mm circumference in 2012, only one thing was still missing: an appropriate mounting bracket for rotary encoders in connection with the ABP measuring wheels. The high level of quality of the ABP measuring wheels featuring an aluminium core and 4 different running surface structures has proven its worth and, within a short period of time, has established successfully on the market (see article on “Measuring wheels”). The new rotary encoder mounting bracket (see fig.) is provided with a mounting plate with 6 holes arranged in a 60° grid pattern (pitch diameter of 48 mm). The big advantage of this arrangement lies in the assembly of the rotary encoder. Compared to a 3-hole solution, it is possible to realise an almost ideal direction of the rotary encoder cable. The rotary encoder mounting bracket is fitted with a parallel-moving mounting plate for the rotary encoder and two guide pillars. The mounting plate is provided with 4 special plastic bearings for minimum friction. A significant advantage over angles with one-sided bearing is that the rotary encoder mounting bracket can be mounted regardless of the direction of rotation of the measuring wheel. This is advantageous for reversing systems, since measuring errors can thus be avoided. The required contact pressure is generated by springs. The maximum spring travel is 8 mm with a contact force of approx. 1.5 KG. Technical characteristics at a glance: 6-hole mounting plate in 60° grid pattern Parallel-moving rotary encoder mounting bracket making the unit independent from the direction of rotation of the measuring wheel Carefully matched spring pressure ensuring permanent contact of the measuring wheel Max. spring travel of 8 mm for relieving the encoder bearing 2 mounting slots in the base plate allowed ideal positioning

Capi Group: PARTNER OF EXCELLENCE FOR MECHANICAL COMPONENTS We are a manufacturing company specialized in the production of epicycloidal ring gears and hobbed parts. Our knowledge and turnover have both grown quickly in the last years, mainly because our corporate philosophy puts innovation and continuous improvement in first place.

The productive µ Hermann Grossmann laid the foundations for precision manufacturing in Dresden in 1863 by founding a machine factory. In 1959, the name MIKROMAT was created from the merger of two plants. Since the beginning, it has been about precision manufacturing for milling and drilling large parts and high-precision screw and thread grinding. In addition to our precision, drilling and milling machines, we produce a range of different screw and thread grinding machines up to a grinding length of 2000 mm. Internal thread grinding is realized by installing a special internal grinding device. In addition to test processing with our grinding machines, our grinding center also carries out customer orders with the highest precision for internal and external contours. Let yourself be convinced!

We as schoolboys stamping and forming GmbH + Co.KG working since 1846 as a supplier of metal processing. Finished and supply parts from various materials for industry and trade. Our product range extends from single pieces to medium series. Our manufacturing capabilities include: • CNC manufacturing to ᴓ 600 mm • high volume turned parts up to 24 mm ᴓ • own tool • Die cutting to 110 to • Welding TIG / MAG / Alu • individual trolley systems • Special Fittings We produce all kinds of fittings, stamping parts, stamping parts tool Falling or inlays in several steps. Also done in-house milling and turning as well as tool for the subsequent series production. We are happy to provide advice and practical help and guide you from the development to the finished part.

Tool - Machines - Plant Engineering Turning - Milling - Grinding Engineering Services

D.S.A. INGRANAGGI S.r.l. was founded in 1988, thanks to years of experience and with the aid of modern machineries is able to offer high quality products and guarantee. The production concerns straight bevel gears and spiral bevel gears constructed through Gleason system, transmission shafts, axle shafts, spur gears. The professionalism allows us to satisfy different demands: from a single piece to mass-productions. The components are made on the basis of a technical drawing or in reference to a sample. D.S.A. INGRANAGGI S.r.l. has more than 50 machines divided into several sections, which produce spiral bevel gears, straight bevel gears, spur gears.

L.M. Stampi Srl is a leading company specializing in the design and manufacturing of molds for plastic injection molding and die-casting of aluminum and zinc alloys (Zamak). With over 40 years of industry expertise, we are the ideal partner for businesses seeking high-precision and premium-quality solutions. Leveraging cutting-edge technology and exceptional flexibility, we deliver tailor-made solutions designed to meet the demands of even the most challenging projects. Mission & Vision > Our mission is to provide tailored solutions with maximum precision and reliability, leveraging advanced technologies and a deeply collaborative approach. > We strive to be a trusted reference for companies seeking innovation, efficiency, and quality, supporting our partners in achieving their goals. Our Goals: - Long-Term Partnerships: we aim to build lasting relationships with clients who require a supplier capable of growing alongside them and adapting to their evolving production needs. - Advanced Technologies: we continuously invest in new technological solutions to offer high-precision molds and support even the most complex production cycles. - Operational Sustainability: we implement sustainable manufacturing processes to reduce environmental impact and enhance energy efficiency. L.M. Stampi Srl offers a comprehensive range of services: Mold Design | Manufacturing | Maintenance | Repair Injection Molding Plastics | Zamak | Aluminum Finished Products Customization | Packaging | Quality Control & Testing

"RUZIC VITEZ" metal manufacturer was founded in 1986 in Vitez with long time family tradition in metal processing. Tradition, experience and new technical achievements resulted in high level of reputation in production, repair and installment of machining parts and machines.

The AVT offers by innovation capability, advanced production facilities and the supply of troubleshooting the basis for a long-term partnership. On the following pages we would like to present ourselves as your new partner. Our services in Überlick: Manufacture of transmission factories (eg drive elements, dental and sprockets etc.) Production of shafts and modules Housing adaptations Contract work in the area of tool and machine (eg blow molding, foaming and molding tools) Contract work in the field of quality inspection