Sheet metal working as desired! We produce burr-free and oxide-free laser-cut parts and blanks as well as Edge bending according to customer requirements. We are also manufacture complete assemblies with our partners in the situation.

Karar as being a family company has superior knowledge based on personel experience of its founders. Not only personel competency but also cultural improvement gained till the begining of the company improve abilities of Karar combining professional approach of its founders and dynamic performance of its organisation. Karar, with its team and with the mixture of all these forms policy of Karar for commercial business, for the enviroment and for the whole Globe. Mission of KARAR is to design and produce innovated and tecnological machines and components of machines for business of its customers in order to perform their studies in more efficient and economical way.

Lasers A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages: We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately. Bending Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses. We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure. In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts. Welding Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free. As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum. We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting. Edit Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems. The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts. Surface As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it. Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available. Labels can be designed as a laser marking, engraving or the screen printing method.

The company GS Stolpen GmbH & CO.KG industrial components and project-related equipment for commercial kitchens, dining expenses, laboratories and food processing are produced. In the business industry component parts and assemblies are manufactured in small and medium quantities of stainless steel and aluminum as supplies for the final producer. In the business industry component parts and assemblies are manufactured in small and medium quantities of stainless steel and aluminum as supplies for the final producer. The company no structural steel is processed. Three dimensions to edit the competence components in the design, the certificate for the welding of railway vehicles and vehicle parts, as well as the in-depth knowledge of the processing of stainless steel and aluminum are the basis for our long-standing relationships with companies in the rail equipment, automated production, the manufacture of heat exchangers, resources the automotive industry and producers of equipment for food processing. Furthermore, we manufacture laser cutting and bending parts, welded assemblies, housing parts, lockers, small refrigeration components, transport containers, drawers and trolley.

Gamelsa, a company belonging to Televes Corporation, was created in 1984 as a subsidiary specialising in the design and manufacturing of metal structures for added-value products that integrate both mechanical and electronic elements. - All kinds of machined sheet and pipes-metal pieces. Cutting, folding, soldering, painting and assembling. - Hole punching up to 8 m/m. - Laser cutting (Hi-Las) up to 20 m/m in steel and 20 m/m in stainless steel. - Stamping up to 400 Tn. - Soldering: MIG, TIG and LASER. - Powder coating. Pieces up to 6 x 2 x 1 m. - Silk screen painting and tampography. Activities of Subcontraction (outsourcing): Machining of sheet and tube by processes of CNC punching, nibbling, laser cutting, bending, welding, surface treatment, painting and marking. Component mounting and subassemblies. MEASURE AND MONITORING EQUIPMENT - 1 Three-Dimensional measurement machine 3000X1500X1500(1um. Resolution) - 1 Scanner for sheet up to 2.500X2.500 mm. - 1 Digital caliper in each workstation mirocmeters - Micrometers - Hardness meter - Roughness meter - Measuring of thickness recovery in ferrous an non-ferrous materials - Thermography for painting curing - Microprocessor color analysis REFERENCE SECTORS Electronic and comunications (Matv and Satelite), Road, Sea and Railway Transport Vehicles, Food Process Industry, Hospital Equipment, Urban Furniture TOTAL QUALITY MANAGEMENT EN-ISO 9001:2008 CERTIFIED TÜV Reinland Reg. No. 0.04.14069 EN-ISO 3834-2:2006 CERTIFIED TÜV Reinland Reg. No. 00/140031 EN-ISO 15085-2 CERTIFIED TÜV Reinland Reg. No. 15085/CL2/350/0/14

We have over 18 years of high production and materials expertise in sheet metal & tube processing. We put in innovative technology combined with the expertise of our staff of 40. We continually invest in modern production tool in the development of our employees. Modern machinery and 3D CAD-CAM systems are for us for years, of course, as well as our IT system that meets the current standard. In the processing of high-quality materials such as stainless steel and titanium, we continuously develop new manufacturing processes. Due to the technology and product portfolio, our customers see us as a full service provider and problem solver for sophisticated and custom products.

The HUEBNER GmbH & Co. KG is one of the traditional system vendors for technical industrial products. On almost every continent, the company was founded over 60 years ago to support its customers with innovative technologies and comprehensive know-how. Our core competencies include the design and manufacture of plastic injection molded products, rubber processing, polyurethane foam parts, vehicle articulation systems, bellows, entry systems, window systems, door systems and transition systems.

The company KUNZMANN is partner of mechanical engineering, packaging industry, the pharmaceutical industry and the automotive industry. We manufacture machine enclosures, sound enclosures, protection and welding devices for machines, fence systems, special constructions and sheet metal parts from steel, stainless steel and aluminum. Our strength lies in the problem solution. We advise, design on 6 3 D CAD jobs, develop, produce, powders and install. And last but not least, we mainly associate contemporary design with high-end technical concept. We have an automatic high bay warehouse with 725 rack positions á 4x2m (5,800 m²) for optimal material flow and storage with direct access to lasers, press brakes and welding to the places of manufacture. Delivery program: Machine covers, sheet metal processing, noise control cabin, sound-proof lining, machinery enclosure, laser cutting, laser cutting, laser parts, sheet metal cladding, sheet metal enclosure, sheet metal processing, guard, powder coating, powder, sheet metal protective covering, cladding, enclosure, sheet metal construction, metal trays, steel trays, steel cladding, steel enclosures, sheet metal racks, steel racks, prototypes, Blechverkapselungen, housing, equipment racks, cabinets, cabins, coverings, sheet metal cabins Industries: Engineering, mechanical engineering, apparatus engineering, automation technology, packaging industry, pharmaceutical industry Surface coating: Powder coating Materials: Processes

We process sheets and assemblies in all common thicknesses, materials and formats with advanced laser and flame-cutting equipment: Laser cutting: Steel and special steel 0.1 mm to 30 mm, Stainless steel 0.1 mm to 25 mm, aluminum 1.0 mm to 15 mm / Format: 2000x4000 mm / pipes and profiles up to diameter 408x3000 mm Flame cutting: Steel and special steel up to 300 mm thickness / size to 2500x6000 mm From laser cutting, bending, welding up to the surface finishing / paint everything from a single source! With our modern press brakes we can get your parts up to a bending length of 4500 mm edges. Welding work is performed by our experienced welders means of the welding process MIG / MAG and TIG in all common materials, such as steel, stainless steel or aluminum. On request we are able to paint your parts in almost every current color.From simple primer to finished parts view, we can meet virtually all customer requirements in our own spray booth. Also we can provide your parts with powder coated surface. As an efficient service provider for industrial and craft we produce your products from single pieces to large series. We will gladly assist you in prototype example with questions and problems in the areas of development and construction. We have the shortest response times for quotation and order processing. Use of a modern PPS system for deadline monitoring and process optimization. In the area of logistics, we leave nothing to chance. Thanks to our own fleet, we are able to ship your parts fast and cheap. In addition to production for industrial customers, we also manufacture metal objects for exhibition stands, shop fitting, etc. ..

Sheet metal processing For years, we are a well known supplier of sheet metal parts for major industries, machine and plant engineering. Our business partners value our design know-how in sheet metal fabrication, as well as our high precision. But also the perfect service we offer our customers: From simple plate blanks to complex assemblies in a single or series production, our team is always solution-oriented. Know-how We can offer exactly the services you need - fast, flexible and reliable. To save you a well-consuming and costly warehousing, we supply all the parts in Europe just in time. All steel parts are available, of course, with us in any of you finish such as sandblasted, painted, powder coated or hot dip galvanized to DIN EN ISO 1461. To this end, we are powerful and long-standing cooperation partner. With our modern and well-equipped machinery, we bring your ideas into form. Whether steel, stainless steel or aluminum, of material thicknesses 1 to 120 mm, cutting or flashings 1-10 mm in lengths up to 3,600 mm. We manufacture according to user helpline claims: • Blechformtechnik • Weldments • Solar technology • Anlagebau • Modules • Special machines • Installation Steel construction Steel construction combines the advantage of a relatively short planning and construction, with a flexible design of the structure. This flexibility of our steel structures obtained by the use of relatively lighter and slimmer, heavy-duty components and a high degree of prefabrication as well as precise, reducing installation times. Our services in business and steel construction are diverse: from simple steel beams pads, stairs, landings, balconies and platforms up to some turnkey commercial and industrial buildings as well as in bridge, we offer our customers a comprehensive portfolio of services from a single source.We are a competent partner for solar support structures. Steel structures Together with our clients and planners we develop individual steel structures or welded constructions of warehouse and production buildings. We check of the static calculations to manufacturing and installation of steel supporting structures the entire production process and can thus guaranteeing precision and punctuality. We manufacture steel structures based on individual requirements: Racks, Transport container, Supporting structures for machinery, Plants, Bridge construction and formwork, Special components in single and serial production, Substructures for solar technology. Steel offers limitless design possibilities.

The MBS A reliable partner in metal Metal Schneider is a medium-sized company that has been established in the year of 2009. Our product range was initially contract manufacturing in sheet metal processing and the stair and railing construction. The strong growth in the early years, we decided to take over the brand logiroll in 2013. Through our highly modern machinery such as a laser cutting machine, the production of logistics Rollcontainer fits perfectly into our product range.

see presentation in the appendix

Customer satisfaction is our top priority. The simple recipe for success is the achievement of outstanding performance. And it is precisely this achievement that we provide for our customers through our qualified employees and modern machines. Individual production (prototypes), small, medium and large series When manufacturing our components, we attach great importance to maximum precision and productivity. On our modern CNC machines we manufacture your parts / assemblies at the highest level. Due to a constantly new machine park and application strategies, we are at the cutting edge of production technology / production possibilities. In mechanical processing, we value the highest precision and productivity. With our machine capacity, we are the ideal partner for your outsourcing project. Another strength in our company is the manufacturing on CAM systems, so we are able to make even the most complicated contours.Combined with effective, coordinated production steps, we realize complete machining from the design to the ready-to-install component. CNC turning -CNC milling up to 5 axes -Drahterodieren -CAD-CAM manufacturing -3D construction -Flachschleifen -Startlocherodieren Tool and jig construction including construction, welding and assembly of assemblies Quality was already a big issue for us as certifications were not yet standard. Our quality management system has existed for many years and is consistently applied and monitored. The constant improvement process and the satisfaction of our customers are constant companions of our daily creation process. Our specially trained specialist personnel, our monitored test equipment and our regular quality records guarantee our customers consistent quality. Upon request, each customer receives our currently valid quality manual and a copy of our certificate.

We are a specialist in the production of high-quality sheet metal parts, complete assemblies and modules with around 130 employees.

We offer quality CNC parts and solutions.

Severin Heusch founded the company in 1850. His invention — the first mechanical clipper — revolutionized the technology used in textile processing at that time. This innovation is the cornerstone of HEUSCH's success story. HEUSCH knives are synonymous with top quality. Quality that still defines standards today.

Your partner in mechanical subcontracting We offer a subcontracting service for mechanical components and assembled machines, in which, starting from the customer's project, we study its industrialization, we identify the most suitable production process, we rely on the most suitable suppliers for each individual production phase.

Based in Normandy, we are experts in stainless steel manufacturing, from cutlery to deep-drawn components featuring invisible laser welding. Our production capabilities include an in-house continuous vacuum annealing furnace, along with high-capacity, fully automated lines for deep drawing, welding, and polishing.

FBT Feinblechtechnik GmbH is a certified welding company specialized in sheet metal processing for rail vehicle construction, electrical and medical technology. We offer our customers, including renowned manufacturers and suppliers, complete solutions from laser cutting, bending and welding to coating and assembly, including comprehensive documentation and quality assurance. This allows you to concentrate fully on your business instead of having to deal with scheduling chaos or missing documents.