We specialize in the manufacture of complex components of the tooling and engineering, typically in the lot size "one" and even small lots & prototypes. We are equipped with machinery that covers the entire process chain of such components. From the pre-and soft processing, about the hardships in the area of the tool and machine typical types of steel, extends to the finish in air-conditioned rooms, our machinery. Machining Centers / Drilling / milling from DMG / DMU and Hermle, Roeder HSC milling, turning / lathe Mori Seiki and Okuma, grinders grinding / Jig Grinding by Hauser, Kellenberger, and the young and the EDM / DEM Wire EDM / EDM SEM from AgieCharmilles and OPS / Ingersoll are installed by us. With 170 machine operators and 120 machines we make about 450,000 per year production hours. We manufacture plates, frames, stamp guide plates, molded frames, moldings, 3D-shaped parts, guide plates, stripper, stripper plates and precision parts such as stamps, molds up to a size of 2000 x 1700, 3D parts up to 1700 x 1400, turned parts up to diameter 650 x 1000 In-house hardening, coatings (PVD, TiN, TiCN, CrN, WCC) in cooperation. The materials we specialize in tool steels, high alloy steels (1.2379, 1.2343 ESR, 1.2344, 1.2311, 1.2312, 1.3343, Divar) powder metallurgy steels, PM steels (CPM, ASP, Vanadis VAN, REX, Hotvar) as well as hard metal carbide ( G10, G20, G30, K10, K20, K40, H40S).

Mecom combines experience and innovation in sheet metal working. The past and the future of precision machining meet in a machine shop that has over thirty years of Padua experience and adopt the most modern and efficient technologies in laser cutting sheet metal, bending, turning, milling and welding.

Easymec S.r.l. is a small-medium Company, having factory and headquarters in Osoppo, 18 km north of Udine city, on the north-east region of Italy and close to Austria and Slovenia borders. EasyMec S.r.l. is specialized on construction, welding and mechanical machining of medium and large steel components, based on Customer’s design and technical requirements. High value-added operations are: milling/boring, sanding and spray painting , wear and abrasion resistant surface coatings (by MIG technology) Thanks to its qualified personnel the Company is also available to offer on site many services of maintenance, revision, revamping, commissioning and inspection of industrial machines; as well its’s possible to request also equipment mounting & assembling services, including electrical hydraulic and pneumatic systems.

Satisfied customers are the best proof of our successful work. We produce everything in-house. In this way we guarantee a quick project flow, even if it takes a little longer. Our range in metal construction is broad. We advise you individually, also on special requests and implement them efficiently and with experience for you. And everything that we cannot do, our qualified partners can!

Our core competence lies in the machining and the design and implementation of special bodies or custom Weldments and production outsourcing customers. If you wish, we will even cover the procurement of materials, surface treatments or any other manufacturing processes for you. Our Services Turning CNC and Conventional Milling CNC and Conventional Keyway poking Plane Mechanical Engineering Welding (MIG / MAG, TIG, TIG, electrodes) Edges, warping, burning Painting Special arrangements 4-axis controlled boring machine OERLIKON Machining Center MAZAK (with tilting table) 5-axis machining center REIDEN BFR 23 (integrated rotary table and A + B axis) Turning to 8000 mm tip diameter and 1500 mm passage

WASTEMA International Wastema has it´s headquarter in Veringenstadt on the Swabian Alb Alb. The Town lies in the idyllic Lauchertal, in the middle of Baden-Württemberg the homeland of the poets, philosophers and inventors. Wastema was established in the year of 1955, and is today leading manufacturer of high quality textile machines. Not only our bandknife machines are well-known in the whole world for their reliability. More than 20 years demanding use are for our products no curiosity. In order to constantly improve our products, we have generous development- testing an production premises at our disposal. With modern machenery and an own powder coating plant we achive highest quality standards connected with a flexible manufacturing.

Metalmix is a strongly operating company of polish origin located in south east part of Poland in malopolskie voivodeship. We are here to offer You the following services: water jet cutting, laser cutting metal sheet folding metal sheet guillotine folding press-brake metal sheet bending welding powder coating We operate on : IFB2(6000bar), TRULaser 3030, Durma SB 4013, Durma ADS 40320, Durma ADS 30175, Schroder MBP. We are also an owner of the brand VOLCAN which is divided into two branches: VOLCAN Quads Accesories and Volcan Tech Accesories. The first one deals with ploughs and parts for ATV's and the second is a brand for fork lifts ploughs. We are also able to make a comprehensive service from designing a particular part through realisation and finally crating. If you need more details please feel free to visit our website: www.metalmix.pl. We hope that it will help you to answer all your questions if not you are particularly encouraged to contact us directly by phone or by mail.

Hake Metal ; is a strong candidate to be the market leader in Laser cutting, bending and welding with more than 15 years of experience in industry. Working with 4 Trumpf laser cutting machines, 3 Trumpf Bending machines in 2000 sqm. closed area. Our new Trumpf Fiber Laser cutting machine will help us cutting materials such as Brass, Cupper , Nickel and such non-ferric metals and materials. Our Bending department has 3 Trumpf Bending machines, where we can bend 4 meters long parts with MAximum thickness of 12mm for structural steels. Our Metal Forming department has 2 hydrolic presses and 2 High Speed Mechanical presses. Our Welding Department has welding processes , including TIG/MIG, welding not only Structural steels but also Stainless Steel , Raw and High Tech Aluminum and also Brass Materials. Hake Metal is managed by our own Erp system with our Quality system, providing best customer satisfaction and quality goods to market.

The GW St. Pölten is a modern industrial enterprise blank. The focus of the company with around 440 employees ranging from industrial parts manufacturing to production of components and complete systems. Advice during the development and construction phase completes the offer. Thanks to the greatest possible flexibility, the company is fixed and competent partner for many customers at home and abroad. Long ago, the GW St. Pölten has made as a modern problem solver a name. The different production areas such as metal working and processing, electrical installation, signage, etc. are equipped with advanced production facilities and therefore allow a high degree of vertical. The high standard of management, production and the products and services is impressively confirmed by a number of certifications in the fields of quality, environmental management, occupational safety and product quality. The ÖNORM EN ISO 9001:2008 certificate and the Austria Quality Seal are the best evidence. OUR PRODUCTS AND SERVICES Metalworking and PROCESSING Machining and Forming Technology with advanced CNC machines, assembly of complete assemblies, components manufacturing including surface treatment, serial production, sheet metal fabrication, welding and much more. ELECTRICAL ASSEMBLY / CABINET Partial and final assembly of electrical components, control systems, and manufacturing of complete enclosures and cable assemblies for mechanical and soldering work. Unlisted panel builder in accordance with UL 508A Manufacturer processed wire and wiring harnesses. SIGNS PRODUCTION, milling, engraving, POWDER COATING Signs in single or serial production to production of building control systems, including on-site installation. GENERAL ASSEMBLY Installations of all kinds, execution of various packaging, Kuvertierungs, sorting works and recycling activities. TEXTILE WORKS Curtain assembly and sewing of all kinds with the exception of clothing confection. Plastic injection molding / ZINC DIE-FOUNDRY Injection molded plastic parts to glass fiber reinforced plastics. Production of zinc die castings and surface finishing including finishing and assembly.

As a leading manufacturer of equipment and systems in the process and heat technology, we are focused on customized solutions and specialized in high-quality welded construction. With our team of engineers, process and production specialists, we manufacture in our factories in Elgg (near Zurich) and Oberuzwil (near St. Gallen). After more than 50 years of experience in the production of industrial heat exchangers, we have expanded our expertise as a systems provider and have a machine park, which is also used for contract manufacturing. Committed to quality and in possession of important national and international approvals, we deliver our products and installations around the globe. * Plate heat exchanger heat exchanger * Sterile * pressure gas cooler * Druckgaserhitzer * finned tube Register * Register * smooth tube shell and tube heat exchanger * oil cooler *

We are a sheet metal production company in Plovdiv, Bulgaria. Our goal is to provide a quality service in sheet metal fabrication using laser cutting, bending, welding, machining, painting, surface treatments and everything else you need for your project. Our clients are mainly Western European companies that are looking for the best prices for quality products.

producer of castings and forging products; in steel, stainless steel, DUPLEX, cast iron (GJS, GJL), alumina-, magnesia- copper alloys, wear-resistance materials, NI-hard, heat-resistance materials, Hastelloy X, Inconel 625, super alloys; coating , heat-treatment and CNC-machining of own products and of external materials; assemby; certificated factories (ISO 9001, ISO/TS 16949); three own offices in China, one in India; from there our engineers control the factories regarding process schedule, quality and delivery times storage located in China, India and Germany

The Achgelis Schweisstechnik company was founded in 2000 by Bernd Achgelis and has been continuously expanded. Achgelis welding technology focuses on contract welding, the creation of welding assemblies and special welding constructions. Bernd Achgelis also advises and trains in all welding processes used. The necessary technology and accessories can be bought and rented from Achgelis Schweisstechnik. In order to get an impression of the welding equipment as well as of the automated solutions, they are used in the operation of Achgelis welding technology on a production area of 850 m².

Benefits & Services For links to overviews of our products. The work of the company BMM is flexible, timely and high quality. We work with selected materials to your individual needs depending on the requirements, we use steel, aluminum and stainless steel, but also copper, brass or plastics. Quality at a fair price We are both for private and corporate clients in use whether large or small projects, private or commercial properties - all orders are carried out at us at a fair price. Our range of services A wide range ensures that you get everything you need, we offer the following services: * stairways,balconies and railings * support structures * Steel components * fences and gates * Protection and forged grating * structures of steel, stainless steel * Welding of all kinds * MIG/MAG * E-Schweißen * WIG * TIG

Please send your inquiries directly to us by e-mail at info@linearis.sk. We are engaged in the production and processing of mechanical parts and components according to Erforderung of customers. For production we use CNC machines and machining centers. We manufacture in our factories all turning, milling, welding and grinding parts of small dimensions up to large steel structures. For some customers, we make complete assemblies incl. Installation, which will also be run with us. Materials such as steel, aluminum, zinc and copper are used daily by us.

As medium-sized family we are already over 50 years Specialist for individual solutions in instrumentation and testing and our instruments are used around the world. Our flat, flexible structures we have to work in a position even special requests efficiently. This enables us to specifically develop our products. If it matters, for liquid vapor and gaseous media in pipelines and containers temperature, pressure, level and flow rate to be measured, is the Himpe AG for over 65 years one of the leading suppliers of primary measuring devices for individual process solutions. Our product portfolio includes a wide variety of instruments for plant construction. Our focus is on installation elements for temperature, pressure, level and flow measurement. Around our products we also offer all related services, the production upstream and downstream of, and assembly parts. Another, outsourced service area is our department "wage drilling" offer we as other services also independent of production.

EAD Engineering offers sheet metal processing and turnkey engineering solutions since 2004 with over 126 skilled and reliable employees. We offer electrical installation services to various projects. The company offers design, production, delivery and installation of complex electrical equipment for the construction business, as well as, automation of production lines and equipment for the manufacturing industry. It also provides design, production, delivery and installation of PV projects and lighting equipment for industrial, street, office, and park applications. We have our own Mechanical department that are equipped with machinery for work with sheet metal. * 2 punch cutting machines Trumpf (sheet metal dimensions 1000x 2000) till 2,5 mm thickness and HACO - (sheet metal dimensions 1500x 3000) till 2,5 mm thickness * Laser cutting machines (sheet metal dimensions 1500x 3000) till 15 mm thickness * Bending machine AMADA 100 tons 3 meters AMADA 220 tons 4 meters * 3 welding stations * Painting hall We have our own Electrical department that are with 26 trained electrician engineers that can assembly electrical cabinets until 4000A Being a manufacturer with traditions and experience, the company uses for its products state-of-the-art technologies, machines and materials, in order to offer to the market modern product lines of switchboards, metal cabinets and control panels. The electrical switchboards, manufactured by Engineering Ltd., meet the requirements of all world norms and standards, and thus perfectly match the equipment built in them, so that to respond to all the specific needs of industrial, residential, public and administrative buildings. The company has been certified by the Bulgarian National Installation Union as an approved installer of electronics and automation systems – manufacturing, delivery, installation and maintenance. Engineering Ltd. has received recognition as a producer of high-quality license by SCHNEIDER ELECTRIC – France, for the production of “PRISMA ” type boards; licensed panel builder of modular switchboard systems by LEGRAND– France; Validation Certificate to manufacture Distribution substations RM 6, issued by SCHNEIDER ELECTRIC ; The company operates on a certified integrated management system including quality management, environment, health and safety at work according to ISO 9001: 2015, ISO 14001: 2015 and OHSAS 18001: 2007.

We are your contact for innovative product development and manufacturing in the field of mechanical engineering, metal processing and metal construction.

The range of our favorable services and prices has been appreciated by our existing customers. For this reason, we are convinced that Your company will also enjoy the benefits from the offer that we would like to present to You. Our versalite and modern machine park as well as our large capacity ensures high quality products, delivered on time at very competitive prices. The extensive knowledge and experience of our employees makes us a technological leader in the field of sheet metal processing, construction welding, machining, equipment assembly, cable harness assembly, product development, engineering assistance and the production of prototypes. The AKS Group is 100% Danish-owned, it was founded in 1924 to become a leading supplier to many braches of industry, mainly electronics, machinery and the processing industry. We hope that this short presentation will meet Your interest and will encourage You to contact us for further information, which can result in our future cooperation. If You want to learn more about our offer, please visit the website at www.aks.dk