Aluminium high-pressure die-casting foundry, with in-house mold development and manufacturing - 100% made in Italy Modernly equipped foundry shop, with mostly fully automated die-casting machines (cold chamber) with locking forces up to 1400t Unit part weight (depending on projected area) up to approx. 14kg

We specialize in the manufacture and production of prototypes and small series. Materials: be processed steels, stainless steels and non-ferrous metals Processing methods: CNC milling method in 2D and 3D partially -Welding in MIG / MAG and TIG methods (existing welding specialist training) Other: We have been working hard with a good laser cutter together and can also offer sheet metal parts in different thicknesses and materials

Our company was established in 1955. The operation is continued in the second generation since 1979. Nearly 700 companies are among the world our satisfied customers. About 45 employees are currently ready to implement your ideas and wishes. Highest customer satisfaction and total quality control are our objectives. State of the art production and measurement equipment in a new functional, clean production building support our young team of professionals in this endeavor. Gentle Rochester dealing with cutting oils and cleaning agents reduce the environmental loads at a very low level. Small and medium series, especially in difficult to machine materials, are our strength.

We are suppliers for industry and trade. Our manufacturing capabilities are: CNC plasma cutting, sawing, punching, drilling, tapping, turning, welding MIG MAG TIG ... Products: Weldments and Parts according to customer requirements in the areas of steel construction, mechanical engineering and special engineering such as machine frames, machine frames, steel structures, consoles, construction from waste water technology and water treatment etc. We mainly steel and stainless steel. CNC - plasma cutting: * Up to 30mm thickness * Available in steel and stainless steel * Cutting range max. 3000 x 1500 mm * Blanks (also possible cuts by argon-hydrogen) by means of technical gases for optimum cutting quality * Programming in accordance with templates and sketches * Reading drawings in DXF - format Stamping, conventional: * Steel up to 40mm diameter 20mm in thickness * Stainless steel Diameter 24mm to 15mm in thickness Drilling, tapping: * Drilling up to diam.35mm * Tapping up to M20 Turning, conventional: (Clamped inside) * Max workpiece diameter D = 600mm * Maximum workpiece diameter D = 300mm (outside cocked) Saws: * Round up to diameter 240mm * Flat to 300mm width Welding: * MIG / MAG * Component manufacture according to drawing * Maximum part weight: 500Kg

The Urben and Kyburz AG is a company of machining, mechanical industry. As a manufacturer of high precision components in the medium-and large-series range, the company supplies an internationally very demanding clientele. With 120 employees and a modern machine, we offer a complete, cutting, machining in medium-and large-series range. What procedures are offered? CNC turning, precision turning, hard turning, CNC milling and drilling, grinding (outside, inside, centerless, honing, polishing, lapping, center, trowallisieren), brushes and spaces. For heat treatments, we work with qualified partners. Which part dimensions we? Everything what you still need neither a magnifying glass, a crane! Expressed in figures, this means: Rotational parts: 10 mm - 250 mm in diameter and a maximum length of 600mm. Cubic parts: up to max. 200 x 250 x 300 mm What precision do we offer? Highest precision is and has always been the great strength of Urben + Kyburz AG. With highly motivated and dedicated employees and the appropriate resources, we produce daily precision parts in the micro-region of all common materials.

The Reinhardt HR sytems based in Koengen been founded in 1984 and developed into a medium-sized company. Due to our expertise we can offer you a fast and flexible execution in the areas of control cabinets, cable assembly, electrical and mechanical assembly work en-sure. Of course, we can assist you with an individual consultation from the first meeting to the production stage. The preparation of the required production pattern is self-evident for us. Further advantages are our well-stocked warehouse (Products from all major manufacturers are in stock with us), as well as our modern tools and machinery. A number of big names (including INDEX Esslingen, TRAUB in Reichenbach, BEHRINGER EISELE in Koengen, ...) trust us - also test us, we look forward to your inquiry. The following services we offer: Cabinet Cable assembly Electrical & mechanical installation work Furthermore, we are a competent partner in the areas of: Electrical installations Switchgear Switchgear panels Control technology

Manufacturer in the field of special machine Handling technology -Transport Technology

We are a young and ambitious company that is steadily since 1999 growth. In our new workshops tailored systems that exactly match the individual requirements of our customers arise. On most modern CAD workstations and CNC machines we put your wishes fachgrecht. Our Strengths - Your Benefits Everything from one source Our strengths - Development, design and manufacture of special machines, production parts and prototypes - Own production of necessary resources, such as clamping and mounting devices - Edit the components on CNC machines - Procurement of purchased parts - Complete assembly of components / assemblies - Delivery Your advantage - Complete systems from a single source - Professional solution to your problem - Wirtschafltiche prices - Fast turnaround time - Very high flexibility - Druchgängiges quality concept

The company was founded under the name SchwarzTEC SHS (blacksmith trade Black) in December 2009 and led to June 2011 as a pure online trading for wrought products. In June 2011, the Assembly service S + F that was added to and carried out installation work of all kinds. In January 2013, the company was renamed SchwarzTec and took over the company Elektro Radio honey in Titisee-Neustadt am 01.02.2013 and integrated into the company SchwarzTEC. The main tasks of the company are SchwarzTEC. Electrical installations, control panel, customer service, repairs and installation work of all kinds, and metal works, and trade in electrical and metal goods. Our focus is at the moment in electrical engineering, but are currently under construction of the metal area and looking for jobs in the field of steel construction / engineering, whether welding, bending, drilling, punching, shearing, sawing and assembling, we are equipped and able to produce a wide variety of components . We would be pleased as you can to help the supplier on. Your company SchwarzTEC

Kupmet produces sheet metal components and weld assemblies as Tier 1 and Tier 2 supplier to industries such as manufacturing of commercial vehicles, busses agricultural machines, stoves, electrical and healthcare devices, furniture, .. Clients are based in Benelux, Germany, Hungary We are customer focused and cost minded.

As a system supplier and development partner understood sauer product since it was founded in 1998 for the series production of plastic components and plastic components. When developing system solutions and sophisticated modules, we support you with plastics experts and the latest plastic processing techniques. In addition to standard technologies are a number of special technologies such as 2K technology, gas and water-pressure technology. Besides the production, include the commissioning of injection molds for domestic and international customers, and objective advice to our business activities. Due to the ever increasing demands of our customers, the original services were continuously expanded around our core competence, so we carry out today from the first drawing to prototype to series production, the range of plastic production holistically.

We would like to present our small and humble company who is doing business in CNC turning parts as well as plastic and rubber injection molding, manufacturing. We have needs to develop and growth in spite of difficult times. Our geographical position allows us so many benefits in production ,storage and distributing. We own 1000m2 warehouse and five machines they occupy 300m2 and 300m2 of office space. As far as production is concerned we could expand the production facility or use the rest of the space for warehouse purposes. We were considering the possibilities of production for foreign markets with the help of partners and achive common interest.

WE ARE A YOUNG, FLEXIBLE AND RELIABLE COMPANY WITH OVER 10 YEARS OF EXPERIENCE IN MECHANICAL ENGINEERING. Our task consists in CNC milling and turning according to the wishes of our customers in our CNC machining center. We manufacture individual parts and serial parts just as accurately for our customers as sophisticated custom-made products. Our services are complemented by the acquisition of assembly assemblies and welding work. We stand for reliable and punctual production and delivery, as well as for highest precision and best quality through our extensive and up-to-date specialist knowledge. Let us convince you!

We are a family company from a small village Prekopa in Vransko community. We have been active on the market since 1993 and we have been trying to adjust to the market and clients’ wishes since then. S&A Company was established with the purpose to produce all kinds of tools but we also offer other services such as production of all kinds of roughing jaws and mechanical parts in metal industry. We are active on the domestic and foreign market. We mainly export to Austrian market where we have been successfully doing business with bigger Austrian companies that value our quality and affordability for 15 years. Our company has been technologically modernised recently, and in this way it is also capable of producing even the most demanding projects in the field of machinery industry.

The company TOMA Engineering Turkey offers software and hardware solutions in the electronics sector for the automotive industry, Bundeswehr industry, medical technology, consumer electronics, telecommunications, agriculture, sensors, security technology and other industries. In addition to a very modern EMS production, a very young and highly motivated team of engineers, TOMA Engineering Turkey has its own PCB production. Of course, this allows us a high degree of flexibility in pricing, delivery times and minimum quantities. Through our management systems and certifications, we handle every project with outstanding quality and reliability. Even if you are not currently looking for a new supplier, it is always helpful to be informed about possible other suppliers in the event that the situation changes. If you are interested, I can also send you our presentation. If you have any further questions by then, I am of course at your disposal at any time.

As an innovative master craftsman and outsourcing partner, we implement the full range of metal construction with individual solutions, inexpensive, on time and with perfect craftsmanship and offer our services for you - of course also with artistic standards and according to your own ideas. As an extended workbench for your company, we can support you flexibly, competently and on time in the cost and personnel-saving implementation of your projects. Our services: - stainless steel technology (welding, machining and processing of stainless steel) - Aluminum welding technology - Processing and repairs of molds - Prototype construction according to information - small series - Individual custom-made products - On-site service - light metal construction - Assembly and disassembly of machines and systems - surface treatments - plant engineering - welded structures / steel structures We would also like to make our resources and services available to you and look forward to a personal meeting and good cooperation. If we have piqued your interest, we look forward to hearing from you. Imprint: According to § 5 TMG: Serkan Bahtiyar MSB stainless steel technology Graf-Konrad-Str. 79 89584 Ehingen Contact: Telephone: 07391/75 22 99 Fax: 07391/75 82 98 Email: info@msbedelstahltechnik.de

In techpilot we offer you the products of BMY which is the best aftermarket connecting rod manufacturer. Having proven itself in the international automotive spare parts market, especially in the production of connecting rods of light commer- cial and passenger vehicles, BMY is a supplier to the world's leading automotive companies. Quality products, reassuring sales and after-sales services, product variety, fast shipping, 100,000 km engine warranty are among the most important reasons for choosing BMY products. Today, as BMY, we are experiencing the happi- ness of this trust and preference. We continue to grow by sharing our happiness, trust and earnings with our suppliers, customers and employees. You can always contact BMY about our company and our products in this catalogue. We would like to express our deepest gratitude to you for your interest. Together to many great happiness and success ... BMY Family

The company masters the most demanding welding technologies. We are a family business founded in 2017. Our key business objectives are excellence in the projects we work on and hiring highly skilled people to achieve excellence. Services: production and welding of metal products, Assembling various metal constructions maintenance work on the facilities, electrical installations.