RIEMER + TIMMANN ROHRLEITUNGSBAU GMBH has existed since 1984 with currently 20 employees. The company is headquartered in 22145 Braak near Hamburg. We offer you: Delivery, assembly on construction sites and prefabrication in our factory in Braak In addition to assembly, we provide the complete delivery of pipe materials, holders, welding consumables and welding gases throughout Germany and abroad. We produce as many components as possible in our workshop according to your specifications. • TIG orbital welding technology We guarantee you the highest quality for all tasks in stainless steel piping and plant engineering. The use of computer-aided TIG orbital welding technology in thin-walled areas is our specialty. • Endoscopy and documentation In accordance with the FDA's GMP guidelines, we are able to document virtually any weld seam photographically using our own video endoscope and store it digitally on data carriers. Our pipeline installations focus on: • Stainless steel piping for: - pharmaceutical, biotechnology and chemical companies - breweries and dairies - Food and food companies • Prefabrication and unit piping - Ultra-high temperature systems (including test and pilot plants) - CIP systems - short-term heating systems (including sterile and aseptic), - separator systems (including sterile and aseptic systems), - Complete valve nodes, coupling panels, pipe fences - Prefabrication of plant parts and assemblies for outdoor installations • Piping of complete large refrigeration systems for: - Cold storage warehouses and distribution centers - breweries and dairies - slaughterhouses and sausage factories - ice cream factories • General industrial pipeline construction - energy pipes (e.g. steam, condensate, water, etc.) Tools and approvals • Tools required for our construction sites • TIG welding machines • TIG orbital pipe welding machines (closed GTAW system) for the highest demands from 9.5 to 114 mm for the pharmaceutical sector (affected by the product). • TIG orbital pipe welding machines (open system) for Cr-Ni welds DN 15 to DN 150 • Tungsten electrode sharpeners • Residual oxygen meters • Two own video endoscopes (endoscope length 9.6 m) with digital image memory • Fischer Ferritscop ferrite content meter including printer, fully mobile • Weld seam documentation using a photo printout or digitally • Welding engineer for welding supervision and advice • Process tests in accordance with TRB 200 /AD fact sheet HP2/1

With 30 years of experience, CS Plastic is a valuable manufacturing partner for 2K and 3K injection molds, electric turntables and multi-component injection molded parts. From the concept to the design to the finished tool. Well-trained and experienced employees with a sense of precision and reliability determine our current performance potential. With well-founded know-how, we support you in the development of feasibility, use of materials and ease of maintenance.

Schmidtke & Sohn Maschinenbau GmbH has been a proven supplier of spare parts and complete repairs for heavy and medium-sized industries since 1947. Our market position and our range of services enable the development and manufacture of special solutions for maintenance work on production facilities and spare parts. At the same time, we offer metalworking and the production of supplier parts for mechanical engineering as individual parts, small or large series.

Our motto: Competence for your success! With about 200 employees, we are the most capable engineering companies in the region of eastern Bavaria. We create assembly and test systems for automotive, medical, white goods and information technology based on customer documents or develop the systems themselves. Products and services - Design, construction and plant - Mounting systems for small and medium-sized parts. - Robot cells with camera systems - Integ. Quality assurance (testing u. Testing) - Standard equipment according to customer specifications (build-to-print) - Contract manufacturing and assembly - Medical - Extruder for chem. u. Food Industry - Production of Manometerlaufwerken General Info Our core competencies lie in the design, manufacture and installation of sophisticated mechanical engineering components or complete systems with high quality requirements. We have particular experience in the use of robots and image processing systems. Integrated quality assurance by measuring and testing technology is self-evident. Our location at the motorway junction Deggendorf guarantees an easy access to the main industrial sites in Bavaria.

Production of cast iron components 1. EN 1561 GJL-150, GJL-200, GJL-250, GJL-300 2. EN 1563, GJS-400-18, GJS-400-15, GJS-450-10, GJS-500-7, GJS-500-7, GJS-600-3, GJS-700-3, GJS-800 -2, Low Temperature: GJS-400-18LT, GJS-350-22-LT 3. EN-GJS-SiMo: No. 5.3111 / 5.3112 / 5.3113 / 5.3114 / 5.3115 / 5.3116 / 5.3117 / 5.3118 / 5.3119 Piece weights: from 0.2 to 45 kg for gray cast iron (GJL), 0.2 to 26 kg for ductile iron (GJS) 10 x DISA vertical moulding lines in the group. Max box size: 850 x 650 on DISA 250C Further processing with 140 CNC machines Assembly Coating: own KTL system, powder coating Offers from approx. 200 parts per year

• cutting production • Installation • Prototype • Repair

Dear ladies and gentlemen, As an expert in the field of the metal industry, we would like to present our services to you. With over 15 years of experience, we support companies such as our subsidiary Raumsysteme Grob. We produce around 1500 containers per year. Companies like yours are also in the process of solving goals or problems and achieving long-term success. Our company is characterized by our high quality, which enables us to offer our customers according to your wishes, quickly and always to the point. Our services include: welding technology, punching, laser cutting, edge bending and folding, CNC turning, CNC milling, powder coating and industrial painting. We would be happy to explain to you more about our services and their specific benefits for your company in a personal conversation. We cordially invite you to contact us to make an appointment. We look forward to working with you and contributing to your success. sincerely

DS-Technic designs, builds, programs and commissions workstations and production lines. We also offer modification, modernization and service of existing machines and implementation of new types of products on existing lines. We have our own tool shop equipped with the latest equipment and a laboratory equipped with a precise 3D measuring machine. Thanks to them, we produce parts for the devices we design as well as elements for customers, both on the basis of the documentation provided and use of reverse engineering. We encourage you to establish cooperation in the field of not only designing and manufacturing entire production lines, but also making elements that require milling, die-sinking EDM and welding. We undertake to make details both in single and prototype production, for e.g. inaccessible spare parts for machines, or serial production regardless of the degree of complexity. We also offer CMM measurements of finished parts. We offer special solutions, tailored strictly to the requirements of customers, developed through deep technological analysis, and then creating a solution concept which evolves in close cooperation with the client. This approach ensures achievement of contractual goals. We have extensive experience in cooperation with renowned companies, mainly from the automotive industry, but not only. We offer the following services: • CNC milling, • Turning • Grinding • Die-sinking EDM, • Welding • CMM and optical measurements. Machinery: DMG CNC milling centers: DMU 1150V: 3-axis with working area 1150x700x550 [mm] DMU70 eVolution: 5-axis with travel 750x600x520 [mm]. Die-sink EDM SODICK AG60L with the possibility of machining a workpiece with dimensions of 950x740x450 [mm] Conventional lathes with machinability (dia.x length) 450 x 1500 [mm] Surface grinder with dimension max. 200x600 [mm] Roller grinder (dia.x length) 250 x1100 [mm] Hole grinder (dia.x length) 200 x200 [mm] MIG/MAG/TIG welding We provide high quality of workmanship thanks to our own measurement laboratory, equipped with: • Mitutoyo Crysta Apex V9106 – 3D coordinate measuring machine – measuring range 900 x 1000 x 600 mm • Mitutoyo QUICK-SCOPE QS-L 3017Z – vision measuring system • Mitutoyo HR-320MS – stationary hardness tester • Mitutoyo SJ-411 Portable Roughness Tester, equipped with touch screen and integrated printer • Mitutoyo LH-600E digital altimeter • Mitutoyo granite slab class 00 dimensions:2000x1000x220 [mm] • Mitutoyo sets: diameters, micrometers, reference plates, depth gauges, sensors, digital calipers We encourage you to send inquiries to the produkcja@ds-technic.com address. We guarantee quality and punctuality. Website: www.ds-technic.com We will be grateful for the opportunity to present our services more widely at your headquarters. If you have any questions, don't hesitate to contact us directly.

Thanks to our many years of experience, we now produce and market a wide range of medium and large-sized turned and milled components for sectors that range from cars to machine construction, welding, dentistry, medicine, automation systems, and oil-dynamic and hydraulic systems.

We are a manufacturing service provider for your precision components in the areas of turning, milling, and grinding technology, as well as module assembly. In this regard, as a high-performance partner we rely on a modern and versatile machine fleet. From single-piece production to series production, for 35 years HAVLAT has stood for implementation of complex customer requests in line with requirements.

As a regional company, we, HEK Präzisionstechnik GmbH, offer small, medium and large series components in the following technical areas: • Milling: components up to 990 mm long, 700 mm wide and up to 350 mm high • Turning: Machining components up to Ø450 mm and 500 mm in length • Small module assembly • Any surface treatment, such as components with polishing • Measurement reports included (Keyence IM 8030T) What makes us a potential supplier is our delivery reliability, the quality of our products, many years of experience and, above all, the requirement for ourselves to achieve the highest possible level of customer satisfaction. On request, we have the option of storing long-range products in our company to ensure timely deliveries. Flexibility is very important to us. We would be delighted to work with you and to count you as one of our satisfied customers in the future. Have we sparked your interest? Then feel free to get in touch with us.

Everything for the success of our customers Since 1993, we convince our customers with many strong arguments: the combined expertise in plastic, plastic assemblies, system assemblies, tooling and services. Not without reason do us both medium-sized companies and large international corporations from diverse industries to appreciate as a powerful partner.

Kroll is one of the leading manufacturers of warm air heating systems and is also a market leader in the field of high-precision sheet metal forming. Decades of experience, the most modern manufacturing technologies as well as our highly motivated employees are the basis for our high quality standard. Our products are well-engineered, energy-saving and meet all technical, economic and ecologic requirements. The team at Kroll is at your disposal right from the outset and would be pleased to submit our proposals, offers and solutions.

Regardless of whether it is a prototype, small or large series, thanks to our many years of experience in the field of machining, we always have a suitable solution for you

U. Eitner Tooling, EDM & Plastic GmbH Benzstr. 7 D-64807 Dieburg Ask us! For over 25 years we have manufactured to approximately 1500m ² and bearings on 1000m ² Tool and die All equipment needed for tool available eg Senk - and Wire EDM. Max 3T tool Total weight approx 25 Tools / year Engineering and CNC machining 4 CNC lathes and machining centers 4 Milling: Max X1800 - Y750 - Z750, 3, 4 and 5 axes. Rotate: Max diameter 800mm Plastic injection molding 10 Arburg injection molding machines, max. 150T, fully automated. Automotive, electrical and thermal engineering about 30 million plastic parts parts per year.

FUTRONIKA AG is the merger of futureblech AG and ZELENKA AG - both innvotive and successfull companies for metal processing and surface finishing, as well as the production of works equipment. Since more than 92 years we are producing in the area of Munich. Modern machines and motivated employees develop and produce for customers all over the world, covering different sectors. From metal processing according to customer´s orders, we handle the complete value chain starting from consulting, planning and construction, to production including mounting and shipping. - CNC-laser cutting - CNC-bending - Punching and tripping of profiles - Reshaping - WIG-, MIG-, MAG- and spot-welding - Soldering - Fettling - CNC-cutting / -turning - Surface treatment - production of samples, components, series up to high-volume series Our production covers all maufacturing techniques and - variations. The individual and personal support of our customers is very important to us. No matter if simple laser-cuttings or complex modules are needed - from the first idea onwards to the completed product - we can deliver according to your needs, whether you need products with a surface treatment or completely mounted or certified. Our team takes over from construction to production and to surface treatment of all products with the focus on metal. Saying this we don´t mind if we are producing samples, components, bigger numbers or high-volume seriens - we work fast, precise and truthworthy. On the following pages we present our portfolio and we would like you to get an idea of our competence. Please try as well www.futronika.de to see more detailled information

STB Maschinenbau AG is a contract manufacturing company. We manufacture individual parts and small series according to your drawings. You will receive your components including surface treatment in the best quality. The production including the assembly of assemblies is also no problem for us. We are looking for machine builder who wants to rely on a reliable partner. * Subcontracting of machine parts * Mechanical engineering * Machine components in wages * Machine parts * Parts turned into wages * Milled parts in wages

As an experienced generalist in the field of steel processing, our range of services includes the manufacture of precise flame-cut parts, welded constructions, machine and system parts. Thanks to our "everything from a single source" principle, we offer a particularly high level of efficiency. As a contract manufacturer, we always follow your wishes. In addition to manufacturing, we also offer a comprehensive range of services: construction - surface treatment - painting - packaging - delivery. SCHAUB Fertigungstechnik - “Everything from a single source”. Our focus is: • Production of welded structures and machine parts up to 20 tons individual weight • CNC processing on milling and boring machines with universal milling head / orthogonal milling head and automatic tool changer up to x / y / z = 10000/3000/1500 mm We also offer: • Manufacture of burned parts on two CNC portal cutting machines, autogenous and plasma Max. Sheet size: 3000 x 6000mm, max. Cutting thickness up to t = 200mm • Edging up to a length of 6000mm We offer certified quality: • We are a certified welding company according to DIN EN ISO 3834-2 • We offer process tests according to DIN EN ISO 15614-1 • We manufacture components according to DIN EN 1090-2 up to execution class 3 • We test components using the non-destructive test methods MT, PT, UT and VT Our entire production spectrum at a glance: - Turning - Milling - 3D Milling - 5-axis milling - HSC milling - Drilling / thread machining - Sawing - Bending / folding - Tin snips (table / ribbon) - Plasma cutting - Electrode manual welding - Robot welding - Inert gas welding (MIG / MAG) - Build-up welding - Extrusion profile processing - Machine frame / machine stands - Complex welded constructions - Mechanical engineering - Industrial assembly / on-site assembly - Sandblasting - Spray painting Please do not hesitate to contact us.

our service Ces GmbH offers extensive services in the field of order-related one-off and series production. If you have capacity bottlenecks, we are at your side. With our machine park, we process workpieces made of aluminum, steel, stainless steel, plastic or brass (other materials on request) in the highest quality and on time. With the ultra-modern CNC machining center, ces has experience in machining technology, both for customer-specific one-off as well as large-scale production. Our machine park 5-axis and 3-axis CNC milling machines CNC and conventional lathes CNC plasma oxy-fuel cutting machine Precision flat bed grinding machine Fully automatic band saw Hot burnishing plant Engraving machine Hardening furnace