The production focus is in the areas of milling and turning. The different machines allow working with almost all materials. Required welding work, necessary hand work such as polishing, to assembly including hydraulic and electrical components are realized.

Thin sheet made to measure. As specialists in sheet metal products we provide for industry, commerce and trade series production, small series and patterns of all kinds. Our focus is in the areas of electrical and electronics industry, mechanical engineering, environmental engineering and in the optical industry. We manufacture custom-made, with the lowest tolerances and come join us: On your specific needs and special we can always respond flexibly. Most modern manufacturing equipment on a production area of over 3200 m2 allow us optimal and timely reactions from sketch and drawing in our design department or with your complete data sets. The machine park. We have a flexible and modern machinery, which enables us to implement different projects. It ranges from high-power laser systems via a stamped sheet metal machining center, CNC controlled press brakes, a fully automated bending center, wire straightening, to welding robots and manual welding processing with TIG and MAG. Laser processing Cope laser machining we. Onto our flatbed laser machine up to a size of 3000 x 1500 mm (steel up to a thickness of 10 mm, stainless steel up to 15 mm and aluminum up to 12 mm) The laser processing is connected to the fully automatic processing to a high-bay warehouse. Punching Cope in the large punching we steel up to a thickness of 4 mm, stainless steel up to 3 mm and aluminum up to 4 mm. The stamped sheet metal processing center is also connected to a fully automatic high-bay warehouse, which realizes loading and unloading. Automatic bending work Our fully automatic bending center with integrated Cutoption allows the edges of short-limbed profiles. The maximum bending length is 2540 mm. The maximum height of 254 mm and the maximum plate thickness 3 mm. Manual bending work Our only CNC controlled press brakes allow the folding of the smallest geometries up to the maximum bending length of 3100 mm, with a maximum thrust of 170 tonnes. Judge Our part straightener made possible by their 19 straightening rolls the production of low-tension and fine flat products. The maximum passage width is 1250 mm. The shortest leg length 100 mm, with a maximum thickness of 0.5 to 12 mm (depending on pressure). Automatic welding processing Our welding techniques are implemented at the TIG and MAG processes that allow us the welding of steel and aluminum. Our Nine-axis welding robot has a working range of 2500 x 1400 mm. An integrated removable turntable can position the working ranges freely through 360 degrees. Manual welding processing For manual welding processing, we employ a variety of welding equipment, welding tables and system. The machining on the welding table system can be realized up to a size of 3000 x 1500 mm. Press-and Joining Technology Our press-fit technology processes all standard self-clinching fasteners, leading manufacturers.The spot welding systems allow the joining metal sheets up to a thickness of 3 mm. Our joining technology is completed by connecting liquid form (clinching) and various riveting. Surface treatment For our products we offer a wide variety of types of surface finishing (eg, electroplating, powder coating, electro polishing, chrome plating, painting, silk screen) to. Through our partner companies this can be achieved quickly. Assembly To complete the products we carry in ...

We are a machining company in the field of small batches (batch size: 1-1000) for turning and milling parts and ready for installation mounted assemblies for mechanical engineering. Our factory is equipped with modern CNC machines and coordinate metrology. In production, we employ only qualified personnel to ensure the required product quality. From the small series of individual parts as a contract manufacturer ... ... exactly in this wide range is our strength. Our expertise comes from the profession. We are not a catalog seller but flexibly to the needs of our customers. This in turn means that we know what you are talking and what is important to you. Many of our customers requirements beyond a standard solution. We have already in the preliminary request our wealth of experience with incorporated. Many customers are consciously looking for these services to optimize their parts or assemblies. our product range is comprehensive. Hardly any area for which we have not yet built and delivered the appropriate part or device. Contrary to the trend, we have a very large range of manufacture. Not because we want to remain self-sufficient, but because we have to be flexible. A word about the materials. Not only the design, the materials used must meet the requirements of the application requirements. We are used to develop individual concepts and advise accordingly.

Stoppani is a leading European service company for machinery, high-tech and medical industries. The systems designed according to lean point of production facilities in Switzerland and Malaysia allow it to efficiently deliver us international corporations with products.

Milling and Turning Services

Harald Berfelde GmbH Since more than 100 years, the Harald Berfelde GmbH produces technical plastic parts of all common thermoplastics with single or multi-component injection molding. Our portfolio contains: High-level tooling – from Design to volume production Research + Development Design, Simulation of products Development, prototyping Injection molding production Assembly + logistics Project management, interface to the customer

The Japa GmbH was founded with a focus on CNC machines Installation / Commissioning and aluminum light crane system installation / distribution / handling devices of 2009. Since the beginning of 2014, we are working hard on our new assembly lines, retrofit of Conventional / CNC machines and contract manufacturing conventional and CNC. Special orders and design through us also part of our range.

We have been developing and producing highly complex tube fittings for automobiles for 30 years. Together with our customers, we manufacture individual product solutions for sunroofs, convertible systems or cooling and injection systems that are innovative, reliable and safe. Precision is our guiding principle. It is the engine that drives our employees. It is embodied in every single component that leaves our factory. Quality is our top priority. It is guaranteed by the use of the latest technologies and constant process control and optimization by our 170 qualified employees.

Design, manufacture and assembly of machine covers, complete assemblies and special constructions - these are the strengths of NeSt GmbH. According to the individual wishes and ideas of the customers, the range of services extends from design studies to the creation of construction and manufacturing drawings with modern 3D CAD technology to the delivery and assembly of the finished products. Steel sheet is essentially processed right up to the finish of the surface. In Herbrechtingen near Heidenheim an der Brenz, where the company is based, work is carried out with traditional Swabian precision, but still with the most modern application methods. In close coordination with the customers, the technicians use state-of-the-art software to design tailor-made solutions based on ergonomic and economic requirements. Constant quality monitoring takes on a dominant function. The company was already certified in accordance with DIN EN ISO 9001 in 1996. In May 2003, the process-oriented management system 9001: 2000 was successfully introduced at NeSt.In May 2009 we were certified according to DIN EN ISO 9001: 2008. Due to the constantly increasing demands on the quality management system, we have taken the necessary steps to the next level for our customers and all institutions involved in the system. In May 2018 we were successfully certified according to DIN EN ISO 9001: 2015. In order to meet the constant demands and to demonstrate quality awareness in a sustainable manner, NeSt GmbH was again certified in September 2015. By issuing DIN EN ISO 3834-3, the company now also fulfills the welding requirements within the framework of quality monitoring and the resulting certification. As a metal processing company in the field of sheet metal construction, it goes without saying that we are a certified specialist company according to WHG.

EW-Tec is an engineering office for mechanical engineering with its own production. We also offer the associated construction, calculation and simulation.

Your contact for machine building We at IPROTec GmbH are a young, rising company in the industry of special purpose machine building with worldwide operations. Our strategic core region is Central Europe. We specialise in the development, construction, planning, manufacture, assembly and commissioning of machines and systems that we design optimally under holistic consideration of the customer’s specific environment and with the greatest possible expertise. Our competence lies above all in classical special purpose machine building. We have planned and successfully completed many projects for numerous customers in the past. In every project, we place great value on perfect coordination with the respective customer. We discuss current issues to make sure we always know where we stand.

We are a medium-sized mechanical engineering company that was founded in Hamburg in 1948 and is now run by the third generation of Mr. Jan Rohde. The team consists of 45 highly motivated and qualified employees who are happy to demonstrate their skills to you. Our state-of-the-art machinery and many years of experience enable us to manufacture complex individual parts, small series, assemblies, devices, test stands and special machines. A production area of 1300 m² is available to you, so that we can also implement large order volumes.

The SMARTVISION factory offers you high-performance, reliable and economical solutions for manufacturing your components from a wide variety of materials such as non-ferrous metals, stainless steel, plastics or steel. Regardless of whether it is individual parts, series production or fixture construction: from design, programming, production, surface treatment, pre-assembly of sub-assemblies to the assembly of entire assemblies by SMARTVISION GmbH & Co. KG, we offer you everything from a single source.

For years, we have been fighting our way through the metal industry to satisfy customers. Short and compact! We weld, saw, drill, turn, mill and bend various metals of all shapes and lengths. We produce balcony railings, stair railings and everything that involves metalworking on or in the house. At the same time, we supply our customers with various milling machines. -Turned parts and also welded parts. With us, everything is possible, from prototype construction to quantity X.

metal construction mechanical engineering welding work Welded components Welded part assemblies Assembly assemblies industrial assemblies single part production series production special construction Prototype development and production patent development CAD construction

We are a mechanical engineering company based in Menden. FKM precision and sawing technology is a small family business. Since 2017 we have been a fixture in the area of special machines in the area of sawing technology and deburring technology. FKM precision and sawing technology also includes the KRÄKU brand, which produces disc sanders, drills, belt sanders and many other products.

SSP GmbH - The company Today Stainless Steel Processing is a highly specialized German manufacturer of Plants and plant parts with computer-aided integration in different process technologies. In addition to the development / planning, the core competence is the manufacture of such systems, everyone primarily through various welding techniques, surface processing, integration and other in-house components. Services such as contract welding, prototype construction, spare parts supply, commissioning and service are also offered. - Production of distribution panels, pipeline, tank and frame construction from various austenitic stainless steels and copper - Planning and production of systems for the beverage industry since 2003 - Manufacture of LIN dosing systems, LIN spray systems, LIN diving systems - Manufacture of LIN, LAr, LOX vacuum-insulated rigid or flexible transfer lines with Johnston couplings or in a fully welded version with a stationary vacuum or with a running pump to create the vacuum. - Manufacture of LHe vacuum-insulated rigid or flexible transfer lines with Johnston couplings or fully welded versions with and without a LIN label. - Manufacture of He-lift lines, He-siphons with and without integrated add-on parts, control valves, throttle valves, shut-off valves etc. - Production of continuous, bath or mixed cryostats - Production of condensers - Production of degasser, subcooler - Manufacture of He cleaner - Manufacture of cryoboxes with cryogenic valves from supplies or from deliveries from well-known European manufacturers.