Job shop

Since the founding of the firm in 1974 we have gathered over 45 years of experience. From the very beginning we have developed extensive knowledge in production of precision measurement equipment, jigs and fixtures. With our know-how, we serve customers from diverse industrial branches and deliver parts or sub-assemblies according to customer specifications. From the firm’s location close to Frankfurt am Main, Germany, there is a direct connection to the BAB A3 Motorway, providing connections to the cities of Frankfurt and Würzburg. We operate both nationally and internationally. Our customers especially value our central location and excellent transport connections.

Our foundry LIVARNA GORICA, shortly called LIGO Foundry is located very centrally located next to the Italian-Slovenian border north of Trieste, and is for 11 years, a 100% subsidiary of the company ERNST ZÜRN in Munich. The foundry has been greatly modernized in recent years, with new technologies. Our production has been greatly expanded in recent years and new capacities have been created. Your advantage: You have one contact in Munich (Sales / Technical) and if necessary a security camp here in Germany. The foundry is mainly specializes in gray iron castings in the range 0.5 - about 24 KG, which are produced on a modern and very fast DISAMATIC line. LIGO has over 60 years experience in the Graugußproduktion for a variety of customers in the automotive, agriculture, hydraulics and pumps industry, engineering, construction, industry, etc. AGS-additionally provides the possibility of processing castings and machining and mounting options in their own branch in Germany and takes over the complete acquisition of logistical tasks to delivery.Our logistics network reaches customers throughout Europe to go up to Sweden. Besides its own Gußherstellung in Slovenia ZÜRN also has a wide network of foundry partners in Eastern Europe and the Far East, which enabled us to you in addition, different materials (eg, aluminum, nodular cast iron, malleable iron, etc.) on a variety of molding equipment cost and from reliable sources produce. Please find below our company presentation about LIGO and ERNST ZÜRN. More information is also available on our website (which is not quite finished yet, unfortunately). I would be pleased to receive a request packet on your part for cast iron products (including nodular cast iron) and the consideration in future tenders much so that we can test our ability to compete for your business and the possibilities of cooperation together. If you should have any questions regarding pre-or ERNST LIGO ZÜRN You can reach me at any time in Munich. Thank you in advance and a pleasant week.

Portrait of the company Felker Drehtechnik The company Felker rotation technique was founded by Mr. Gerhard Felker and his wife Verica Felker as a pure contract manufacturing companies in D-89610 Oberdischingen in December 2004. The range consists mainly in the manufacture of automatic lathe parts (valve seats, valve pistons, valves, anchors, piston, pin, spring plate, lathe parts, micro turned parts, micro-turning), made of steel such as 9S Mn Pb 28K, 16 Mn Cr5 C 45, 42 Cr Mo4 Stainless steel to 1.4301, 1.4305, 1.4105 (X6Cr Mo S17), cast iron, aluminum (Al Mg Si) and brass (to Zn 39 Pb) on 9 Tornos AS 14 six-spindle automatic lathes up to Ø 14 and an additional plastic on a Star lathes up to Ø 16 in Central series and large series from a lot size of 20,000 or 5,000 units at long lathe. Besides this installation work, Nachdreharbeiten and Deburring and Aussuch or testing work of rotary parts of all kinds are carried out. Our strength lies in the flexibility of the company.An absolutely smooth cooperation among the employees as well as with senior management and the customer ensures virtually zero defect deliveries. We endeavor to expand and consolidate its above-average quality, our previous successful and trusting relationship with our customers. Our goal is to provide systematic improvement in quality and on time delivery to satisfy the customer and implement its requirements given us 100% error-free and at a reasonable cost. We are certified according to DIN EN ISO 9001:2000 and reject ourselves to the standard DIN ISO TS 16949. Be able to work more efficiently in addition to three of these aircraft were purchased, which have been found in our new premises good place. The new building has a production area with warehouse and office of approximately 1000 m², as well as buildings for more than one employee / inside of about 170 m².

Experience For over 50 years we manufacture turned parts from 2 - 60 mm diameter brass manufacturing, Steel, free cutting steel, aluminum, stainless steel and Delrin. The processing of multi-edge materials is our specialty. Qualification Highly trained professionals guarantee a first class job. Innovation To even be able to work optimally. but also to provide our partners with exactly the ideal tool at hand to be able to, we also develop its own new devices, such as revolving, adjustable guide device for Electricity and Tornos lathes to 12.70 mm in diameter, or the quick-release floor 161 E 1-26 mm in diameter. Quality A sophisticated quality assurance system ensures consistently high quality. Basis of Q.-p system is a specially created manual, according to DIN EN ISO 9001:2008, with exact direction lines for production, management and delivery - everything about your product. Equipment The impressive number of our cam-controlled long and turret lathes is perfectly complemented by CNC lathes.A separate post-processing department for drilling, milling, thread cutting, deburring, countersinking and Tumbling is also available, as well as the means for sandblasting the finished turned parts. Continuity Our long-standing customers know they can rely on us. Costs Early switch to "lean production" as well as our practice, always to contact several suppliers and compare precisely, ensuring excellent value for money for our partners. Because we pay for their materials not only on price but also on the performance, that is: the quality. Flexibility Quick to respond, always deliver on time, meet the individual customer requirements, sometimes work on weekends, reputable advice, keep moving - the best strategy for success for a smaller company. And a decisive advantage for you!

We are your innovative manufacturing partner for complex cubic parts and demanding high-quality assemblies. Our parts are used in demanding industries such as aerospace, defence, mechanical engineering, semiconductor, the automotive industry and renewable energies. By generating and implementing exceptional ideas we achieve the decisive advantage beyond CNC- technology. The partnership is - to achieve the common, decisive added value. The partnership consists of achieving joint, decisive added value.

IMPEA has been in the sheet metal cold-forming and assembling business for over forty years. As supplier to leading Italian and foreign companies in the field of farming mechanization and earth-moving machinery, it prides itself in particular on its considerable specialization in the production of vehicle bodies and lightweight structural work. Its main products are: bonnet panels, mudguards, tanks, platforms, cabs and panelling. Founded in 1963, it started off as a daring business venture undertaken by Pierluigi and Maria Bosisio. Not afraid to make sacrifices, the two grasped its potential and, with passion and great skill, laid the foundations on which to build its market reputation. IMPEA, a family-run business, draws its strength from the continuity of its management, now in its third generation, and from the skills of its capable employees, who work meticulously to achieve customer satisfaction. The heart of the company is the Piadena production unit, which stands on an area measuring approx. 30,000 square metres, with indoor floor space accounting for 15,000 square metres. One of IMPEA's distinguishing traits has always been hefty investment, along with continual innovation in machinery and systems at the cutting edge of technology and its highly specialized and well-trained personnel. Remarkable flexibility and the ability to adapt to the customers' needs make IMPEA a reference company for businesses, both at home and abroad, seeking reliable suppliers - valuable partners with whom to increase their competitiveness on the market. We Offer: SHEET METAL FORMING, SHEET METAL ASSEMBLING, FORMING, 3D LASER CUTTING, 2D LASER CUTTING, SHEET METAL MOLDING (OR DEEP DRAWING), BODYWORKS, MUDGUARDS, TANKS, PLATFORMS, BONNET PANELS, GRIDS, CABINS, PUNCHED SHEET METAL FORMING, PLATES MACHINING, SHEET METAL FRAMES, LIGHT CARPENTRY.

Weckenmann was founded in 1957 and is currently run by the 2nd generation family business. As an innovative company in the machine - and plant engineering Weckenmann dedicated to a the development and implementation of complete production plants for the precast industry Due to the high level of vertical integration and the modern well-equipped machine park Weckenmann is a highly capable supplier of wide range of industries. One of the priorities here is the production of complete welded subassemblies either of sheet metal or of rolled sections with optional cutting, complete surface treatment, or even completely assembled with drive components and control components. Assemblies weighing up to 20 tons and a length up to 16 m can be prepared as a single production as well as with individual lot size. Due to our own performance program we have Spezielisten in the areas of Mechanical Design, Aufomatisierungstechnik, Schweißtechni, cutting assembly and surface technology.

Quality is our primary objective in the development, manufacturing, servicing and tuning of high performance engines including test runs, CNC machining of precision components for racing, mechanical engineering and aviation.

Together we develop efficiency! As an engineering office for special machine construction, we are at home in Herzogenaurach, Bavaria. When creating requirement-specific one-off products and small series, we fully support clients in Germany and neighboring countries with: individual advice and planning of concepts professional design and high-precision manufacturing On-site installation including commissioning and test run With over 25 years of experience in computer-aided design and manufacturing (CAD/CAM), we can usually act more efficiently, more purposefully and with less effort than the in-house development even of large companies.

Thank you for visiting our profile! We are a medium-sized company from Berlin's bacon belt. Our company consists of 4 divisions. Metal processing, automation, system house, special machine plant construction. We are currently 160 employees and have a lot of competence and flexibility across three locations. Our mechanical production / metal processing is equipped with modern machines and is happy to offer you laser cuts, bent parts, but also welding assemblies. We have an in-house construction, which is your perfect partner for the implementation of all projects in metal. We are happy to provide support for series or individual project business. True to the motto "everything from a single source" we can offer you a corresponding powder coating. We are a very good and reliable supplier! Try us! Key data: - 1 CO² laser, 1 fiber laser and 1 laser / punch combination (up to large format, material thickness up to max.25 mm) - 3 modern folding machines (up to 3000 mm in length, depending on the length and material up to 8 mm in thickness) - 10 welding workplaces (all common welding processes and metals) Our customers describe us with: • Responsive • Delivery on time • problem solver • Quality conscious • Close to the customer We are competent, uncomplicated and look forward to every contact. Best wishes Thomas Mohring Head of sales management Metal processing Gemtec AG Mail: mohring@gemtec.eu Tel .: 03375/9227 380

We are a new team from Latvia, which has a wide-ranging approach andknowledge in the field of production. Our goal is to fill the client's wells, even if it includes the most diverserange of materials. We work with a number of metalworking, woodworking, dyeing,construction companies. Manufacturing services include CNC handling, MIG/TIG welding, folding,pulver painting, etc. We can ensure a full production cycle by offering competitive prices andhigh quality standards from the idea to the finished product. We shall monitor the full production cycle

ANG has decades of experience in the production of mechanical parts for Luxembourg industry and the greater region, as well as for private customers. The mechanical workshop has been able to increase its quality, reactivity and service over the generations. The satisfaction of our customers remains our primary objective. We reproduce complete parts from models or drawings. Often a mechanical part requires heat treatment. We also provide surface and heat treatment of high value-added parts.

ZEIKOS GmbH is a service provider in the field of industrial 3D printing from individual parts to series production. We work with PA, silicones and transparent plastic. Our advantage is that we can solve problems for our customers because we are both a design office with a small mechanical workshop and we have a network of manufacturing partners. We specialize in producing your printed parts with series finishes. From medical surfaces to surfaces for outdoor use. In addition, we can support you with the construction or simply with the data transfer for 3D models.

TElena Engineering - Your reliable choice for CNC milling and turning. Committed to meeting the needs of our customers, we provide customized solutions for the highest demands. With our precise and reliable CNC manufacturing technology, we deliver high-quality results. Our dedicated team works efficiently to execute your projects on time. Trust in our expertise to meet your individual requirements. Contact us today and let us show you how we can help you achieve your goals.

As a leading machine and metal construction company, we offer our customers a comprehensive range of metal processing services. Here we present just a few of our impressive services and are convinced that you will be amazed by our high quality and professional competence. We are also certified according to DIN EN 1090 EXC2. Contact us at any time if you have any questions or need an individual solution for your project. We work closely with you to make your ideas a reality laser cutting Material: Material thickness: Steel 10-12mm Stainless steel 5-6mm Aluminum 3-4mm edging Material: Material thickness at 3100mm HL Steel 45N/mm² 8mm Stainless steel 70N/mm² 5mm sheet cutting Material: Material thickness at 3000mm HL Steel 45N/mm² 6mm Stainless steel 70N/mm² 4mm bar cutting max. cross-section: rod length: 320x180mm 6000mm Bending sheet metal Steel 3mm max. 1200mm HL round/ring bending Dimensions: D: 42.4mm D: 33.7mm Square & square tube pipe grinding Dimensions: D: 20mm D: 25mm D: 30mm D: 40mm D: 42.4mm D: 50mm D: 65mm D: 76mm welding MAG and TIG

CNC-Bearbeitungstechnik takes over your excess capacity or your continuous demand in the field of machine processing. We are ready with fast response times for individual parts, pre-series as well as series production. Production takes place with experienced specialists and technicians on a modern machinery.

Engine rebuild company. We produce parts for engines for some time, now we are using that knowledge to get into industry and produce all kinds of parts.

MOSA Metalltechnik was founded in 2017 as a family start-up and is characterized by its very personal corporate culture. Our dedicated and well-trained employees are our greatest asset. That is why we always strive to find the best possible solution for everyone — this applies to our team members as well as in customer contact. Sascha and Marietta Morocutti look back on more than ten years of good cooperation. And this is also noticeable externally: Our employees and management have a relationship of mutual trust. Together, the MOSA team is looking for further development opportunities in the area of professional welding work. After an extremely successful start, we have already been able to support many projects and work successfully with customers from a wide range of industries. We are proud to have established ourselves as a leading expert in welding work. Our range of services includes maintenance work, repair welding, manufacturing and assembly, placement of specialist personnel and much more. Now we are heading into the future of metal technology with vision, expertise and professionalism!