The Alfred Sander KG has evolved over the years as a specialist in the manufacture of hinges this / tape rolls. Another mainstay is the contract manufacturing of Rohrabstichen, which are manufactured largely for the automotive industry. Rotating parts are manufactured according to specific customer requirements. Überdurchnittliche quality, short delivery times and flexibility are the strengths of the company. The company Alfred Sander KG was founded in 1957 as a trading company and began in 1960 the manufacture of rolling mill accessories. Soon the production was extended by weld-on hinges / tape rolls, turned parts and Rohrabstiche. The demand for turned parts and hinges this is constantly increasing, so the production of rolling mill accessories are placed. Take place in the next years moves to larger production facilities. We remain true to Remscheid! Since 1994 you can find us in Upper Rein Hagen 3a in 42857 Remscheid.

WHEN WE CUT FROM GOOD! Water jet cutting industry meets In principle, rectangles, circles, ellipses, curved paths (eg, holes, flanges, cutouts, perforated sheets, letters, pipe cuttings, etc.) are produced each geometry of flat and slightly curved surfaces so. The maximum cutting accuracy of our method is: Accuracies: + / - 0.1 mm Water is forced under a pressure of about 4000 bar through a nozzle of 0.2 mm. The water admixed abrasive ensures a "grinding out" the kerf of 1 mm or less. This Mikrozerspanungsprozess hardest materials to be cut. A CNC controlled water jet cutting machine enables cutting of any form of flat plates. Water jet cutting meets craftsmanship With the water jet, almost all materials from aluminum, stainless steel, porcelain tile, ceramic tile, granite, copper, brass, titanium, steel, stone, and non-ferrous metal, glass, ceramic, plastic and composite materials to natural materials such as wood, cork, and Edit rubber without problems. The water jet can simultaneously edit multiple layers of materials. - No deformation due to delay in heating - No burn-off at the cut edges - No hardening in the kerf by temperature - No tempering colors on steel - Clean cut edges with aluminum, brass, copper, etc. - The finest contours with extremely thin bars (tool width 0.8 mm) - Very true to size, so no rework required - Economical even for single parts and small series

The ITM was established in 1990 as a service company for steel construction, maintenance and welding technology. With the concept of planning, design, manufacture and assembly - all from a single source, the company started its business in the industry of building materials industry. Today, we find our clients also in power plants in mechanical engineering in the chemical industry in the food industry, and in plant The technical ability of our employees is the basis for co-operation with our customers. The entering the customer's benefit is the measure of our work. Friction welding Our range of services: Test welding Musterschweißungen Repair welding Wage jobs in each batch size Type according to ISO 15620 Industrial installations: In the ITM services our engineers and the services of our experienced fitters, welders and locksmiths are combined to benefit our customers.We plan the assembly procedures for you and carry them out competently and reliably. With our experience we are able to offer cost-effective solutions for the most demanding tasks. We integrate individual components or complete existing equipment in their facilities. For complex projects, we cooperate with strong partners. Welding assemblies: We offer a wide range of welded components in the materials steel, stainless steel and aluminum. In the production of individual small series and specific special - for example for vacuum technology or the crane - we carry most complicated structures to suit your specifications. We are technically able to process quality and engineering steels for different requirements. In cooperation with competent partners, we will solve your manufacturing problem. Steel construction: The ITM is technologically fully equipped. This allows light to medium steel structures are produced.Surface protection, we realize customer requirements. Powerful galvanizing plants are our partners. The Welding Training and Research (SLV) Hall certifies that the company, the manufacturer's qualification: for the welding of steel structures according to DIN 18800-7:2002-09, steel structures up to 20 m span and stages in a floor for components with predominantly static loading for chimneys made of steel DIN 4133, size range 2 with base materials: mild steel S 275, stainless steels with a strength class 235

Components and Diesnstleistungen for handling and Materialflss in combination with aluminum profiles. "Sigle" stands for economical technology, know-how, commitment and reliability - and of course as part of a network, eg as part of larger projects with distributed tasks. As a young, performance-driven company based in Remshalden near Stuttgart, we have an accomplished, responsible-conscious team of employees and a rich technical repertoire.

We are your competent partner in the area of machining. In modern CNC turning centers we produce parts made of steel, tool steel, stainless steel, brass, aluminum and POM. We supply well-known manufacturers in the automotive, aerospace, furniture, medicine, optics and modeling industry. We manufacture high precision turned parts and grinding parts and document it as desired with initial sample and in the series with process control charts. We specialize in centerless grinding. When hardened parts we achieve surface finish accuracies of Rz 0.6. We are certified according to DIN EN ISO 9001/2008 Their products comes complete with us from one source, including all surface treatments. A self-development is our stop for collet chuck 173 E. This stop is for collets 173E to adjust a length x. The stopper is made of VA. Enormous change Rüstkostenersparnis by rapid and adjust the stop. Very accurate machining length possible.

Pan EOOD is a Bulgarian structural steel and sheet metal processing company based in Haskovo, Bulgaria. The company has more than 15 years of experience in the field of metal processing. Our previously manufactured products, components and systems include welded parts and weldments produced by TIG and MIG / MAG welding, parts, made by plasma cutting, punching and bending parts made of steel and stainless steel. Due to our extensive experience we are able Scweißteile in small to medium runs and steel structures of various size according to individual requirements of our customer's needs.

Punching, laser cutting? Or both? For us no question, you can at any time that you choose for the best manufacturing process. Our combined Stanz-/Lasermaschine, TC 600 L with diverse manufacturing capabilities in sheet metal processing meets the diverse needs, regardless of whether items or series. In addition to punching and laser cutting of contours and openings is possible in one clamping gills, eyelets and beads into shapes and threaded into rolls and holes to sink. Our fully automated TC 600 L with integrated SheetMaster enables an economic production of large numbers by the possibility of self-loading and unloading of workpieces. That is, we are your competent partner in the manufacture of punching and laser parts and finished fast and economical for you.

We are a company that specializes in the processing of thermoplastics and Thermosetting plastics and light metals. From plates, rods, tubes and profiles are manufactured to order parts and assemblies according to drawings, CAD files, sketches, or samples from individual to mass production.

Manufacturing and trading of turned parts and other goods which were manufactured by machining. It will work on all steels, non-ferrous metals as well as plastics. Stainless steels are standard. Long and short turned parts up to diam. 50 mm from the rod. Smaller parts can be barrel finished with us. Blacking up to 1000 mm length parts in wage labor.

With my CNC lathe I edit parts up to a diameter of 190 mm and length up to 260 mm from the rod (up to ø 45 mm). Series production, single production.

Key points about the company Teutoguss GmbH stands for: • Consulting in material, design and value analysis questions • continuous on request use of 3D CAD data, rapid prototyping • exemplary IT organization, integration of all the key application areas in technical and commercial areas Main applications, customer base: • Shipbuilding • Tool, road construction, testing, land, special purpose machinery • Pumps and Valves • Compressor, Vakuumverdichterbau • Gear, Sondergetriebebau • Wind energy plants • Gas Fittings • Tools and equipment • Hochleistungsventilatorenbau Production methods: • Mechanized hand-formed cast of 50 kg to 1300 kg per piece, in cold resin-bonded sand (furan); box sizes 520x620 to 1100x1100 • Hand Shaped castings to 15,000 kg per piece in GG, to 10,000 kg per piece in GGG, in cold resin-bonded sand (furan); box sizes 900x1720, 1000x7000, 2700x4500, and many special sizes Casting materials: • Cast iron with lamellar graphite according to DIN EN 1561: EN-GJL-200 to EN-GJL-350 • Cast iron with nodular graphite according to DIN EN 1563: EN-GJS-350.3 to EN-GJS-800 • ADI 800 and ADI 1400 according to DIN EN 1564, EN-GJS-800-8-EN-GJS-1400-1 Core manufacturing process: • CO2, cold resin, cold box, Croning

MVS supplies mechanical customized components for the followings sectors: - Torches and other components for cutting and welding equipment - Taps and valves for drinking water - Fluid control and measurement (valves) - Fittings for pneumatic - Components for high pressure washing machins

Welcome to the exon GmbH Your partner in the areas of: Laser cutting Plasma cutting Sheet metal working Industrial Coating Baugruppenfertigung Welding Mounting Business Using the latest technology and innovative cutting solutions we provide to our customers high quality and reliable services you can not provide themselves because of their corporate structure. Here, our editing program ranges across all materials, because thanks to the latest laser technology we are able to not only process almost all metals but also materials such as plastic, wood, or quartz able. In metalworking our processing spectrum ranges far beyond mere laser cutting out. Thanks to powerful interconnected companies and partners we are able to offer you a full service in metalworking, which goes beyond the mere Processing for assembly, painting and final assembly. We work according to the motto "miracle we do immediately! For the impossible, we need a few days!"

● The aluminum Editor ● diversity from a single source. ● production of finished parts and components made of light alloys. ● CNC milling of aluminum semi-finished products, castings and forgings ● Procurement and processing of extruded aluminum profiles and aluminum rolled products ● KPS - Joining Technology We offer: -specialists For aluminum profiles, aluminum sheets and aluminum casting -Werkstoff- And procedural justice counseling -Engineering -Einbaufertige Parts available with surface -Montierte Assemblies -3D Measuring machine in X 700, Y and Z bis600 to 500 mm -CAD- An exchange of data is in the file types: SAT, SAB, DWG, DXF, IGES, STEP, STL and CATIA V5 possible. -Conventional Production: sawing, milling, drilling, punching, welding, grinding, tumbling -CNC-Controlled 3-roller bending machine -Bolzenschweißen -Kalt-Pressure welding (KPS) -Vormaterialbeschaffung, Stocking -Qualitätsmanagement System according to DIN EN ISO 9001: 2008 certified by TUV NORD CERT

Dear Sirs, in this way we would like to briefly vorstellen.Die society HECKMANN POLSKA Produkcja Metalowa i Maszyn Sp. z oo offers you a professional capacity as a subcontractor in the area of steel structures. The advantageous location of the entrepreneur in Krzeszyce (30 km to the German-Polish border) can make our offer to you very attractive in transport costs. We are a company that was founded seventeen years ago and we are present from the year 1998 to the Polish and German market and very active. Our company is a subsidiary of: • Heckmann Maschinenbau GmbH method Dörverden sleeves • Heckmann Beizerei GmbH Dörverden sleeves • Heckmann Metal and Machinery GmbH Verden • Heckmann Metal and Machinery GmbH Bremen • Heckmann Steel and Metal Ost GmbH Eisenhüttenstadt • Heckmann GmbH & Co.KG Steel and Metal Dahlwitz Hoppegarten Our highly skilled production team consists of fitters and welders of steel structures with confirmed sweat proof. In order to guarantee our customers consistent performance at a consistently high level, we subject our manufacturing processes a continuous quality management. Our certifications: • Quality assurance system according to DIN EN ISO 9001 • Welding certificate according to EN 1090-2 execution class EXC2: 2008 + A1: 2011 and DIN EN ISO 3834-3 We have two production halls with a total area of approx 800 sqm where our 20-person fc works divided. Each hall is equipped with an overhead crane with lifting capacity 5t. Our machinery consists of cutting machine (cutting length 3m sheet thickness 8mm), edge-bending machine (up to 3m bending), plate mill (2m, thickness 6mm), tube bending machine CNC diameter max. 60mm. Currently our power capacity is not fully utilized.At the moment we have run 80 to 100t steel construction able, depending on the type of construction. If you are interested in such cooperation, we ask you to contact us to discuss further details can.

From the initial sketch through to 3D design to the finished product - with us you get everything from one source! In between are processing steps such as laser cutting, punching, bending, welding, riveting, polishing, powder coating and assembly. With modern equipment and qualified staff we have but the way individual pieces, small series manufacture large quantities according to customer requirements. Through close cooperation with our business partners, we have achieved flexibility, quality and punctuality at the highest level. Our years of experience in the metal industry allows us not only to manufacture your products with diligence and accuracy, but also to find the optimal design solutions and deliver. Translation by Google Translate

Who we are We at Scilla Meccanica have been melting, casting, and machining mechanical components made of bronze, brass, and aluminum ever since the early 80s. The comprehensive, yet highly flexible approach we adopted in the light of and in order to best cater to our customers�� needs allows for quick response times, high quality, and unparalleled cost-effectiveness. Our two separate production departments and 70 highly skilled craftsmen and technicians manufacture full and hollow shell-cast parts 24-7 (the hollows being the result of sand core insertion or centrifugal casting), and machine shell as well as continuous-cast components. Besides being UNI EN ISO 9001:2008 certified, we have two separate quality assurance departments specializing in chemical and dimensional checks, respectively. Our foundry Our foundry delivers bronze, brass, and aluminum parts such as: - Bronze bearings and bushings - Strips - Plates, clips, and rails - Cages for bearings - Rings, crowns, and flanges all of which ranging in size from 10 all the way to 2000 mm and intended for applications such as industrial, naval, and construction site machinery, mining equipment, steel plants, and hydraulic monitors and taps. Our nimbly organized, high-capacity production departments enable us to quickly deliver one-of-a-kind pieces as well as large-scale batches. Mechanical processing In order to ensure high-end quality in all processes, we equipped our mechanical processing department with a wide array of tools including CNC machines, machining centers, milling machines, traditional horizontal and vertical lathes, and EDM machines. Our chemistry lab Equipped as it is with quantometers and durometers for destructive and non-destructive tests, our laboratory performs highly accurate in-process as well as post-melting checks to ensure our alloys meet the highest possible standards. Our metrology lab To ensure full compliance with customer specifications, all finished, drawing-based mechanical parts undergo painstaking start-up as well as end-stage inspections. Besides, all taps and hydraulic monitors are also pressure-tested.

LUC-PRODUCT SP. Z OO LUC Product specializes in parts production in the area of turning and milling. Highly qualified staff and a modern machine park give us the opportunity to offer a high quality manufacturing in the field of turning and milling that meets the needs of the most demanding customers. Talk to us.

Our company was founded in 1996 with 100% Hungarian ownership. The TERMIN acronym derives from the Hungarian words production (TERmelés) and quality assurance (MINőségbiztosítás), as we have always put great emphasis on quality production. Our field of activity from the very beginning is high precision CNC metalworking and precision mechanic assembly. In the years since the foundation, the number of our partners and our product range has been constantly expanded. Our products are used in the following industries: - Aerospace - Robot industry - Food industry - Tobacco industry - Medical technology - Optics - Pneumatics - Rail modeling