Calculation, design and sales of springs (extension springs, compression springs, torsion springs, spiral springs, wire and flat molded parts, bending parts and assemblies) of round, flat and square wire. Springs: - Wire thicknesses up to 3.3 mm (round / flat / square) Applied end turns or open - Ground end coils or unprocessed - - All winding body geometries feasible (cylindrical, barrel-shaped or waist, Beehive, Taper) Extension Springs: - Wire thicknesses up to 2.8 mm (round / flat / square) - All possible Ösenformen feasible (incl. DIN) - With adjustable internal bias voltage (eg to achieve digressive characteristics) Torsion springs: - Wire thicknesses up to 4.5 mm (round / flat / square) - All leg shapes feasible - As a simple torsion spring, double torsion spring, torsion spring quadruple Spiral springs: - Wire thicknesses up to 3.0 mm (round / flat / square) - Windungsverlauf freely adjustable - With or without molded legs - All possible Ösenformen feasible (incl.DIN) Wire and flat springs: - On winding, coiling, bending centers of brands Wafios, Itaya, Simplex Rapid or BIHLER - Wire thicknesses up to 4.5 mm (BIHLER up to 10mm) Coils: - Wire thicknesses up to 4.5 mm - From enamelled copper wires with stripped and tinned ends - RF coils of silver-plated copper or bronze wire Stampings: - Bandwidth up to 120mm, thicknesses up to 10mm - Additional Technologies welding, threading, bolting our BIHLER automata - Assembly of components including processing of supplementary parts (plastic parts / screws / wire springs, etc.) - Tubes of strip material with and without slot, tape ends clinched or shock Manufacturing technologies: - Winde-/Wickeltechnik - Stanz-/Biegetechnik - Grinding of spring ends - Shot peening - Heat treatment - Surface Technology - Setting and testing - Isolation & automatic packaging All manufacturing technologies can be linked if required! Materials: - EN 10270-1/-2/-3 / / EN 10151 / / etc. - Copper, beryllium copper, bronze, brass, copper alloys, etc. - Cr / Ni steels and duplex steels - Surface-treated and plastic-coated wires - Composite materials RIBE has its own tool and a house plant! Development & Construction: - CAD with interfaces to all major 3D CAD programs - Spring calculation software - FEM analyzes / FMD possible Certifications: - DIN ISO 9001 - ISO / TS 16949 - ISO 14001 - OHRIS Connection technology: Screws as drawing parts, Pleulschrauben, motor screws M2 - M24, cold formed parts, rivets production quantities of 50,000 pieces We look forward to meeting you!

TIC - LENS laserske tehnologije d.o.o. company offers and develops solutions for a wide range of metal fabrication & repair applications with the state-of-the-art laser technology for all industrial areas. The main work is based on the laser deposition rapid prototyping technologies for metal parts with LENS 850-R (Laser Engineered Net Shaping) machine and laser hardening of metal parts. The LENS technology is used for the needs of the tool and automotive industry for the production of unique products (functional prototypes) of complicated shapes from different materials, repairs of elements, production of gradient materials, repairs and renewals of products.

The enterprise A. Magierka welding engineering e.K is since the establishment more than 30 years ago your strong partner if it around wage weldings on high level and highest precision goes. Our sphere of activity extends from micro weldings for the metallurgy, as well as for the medicine and electro-technology. Rapid development in the technology and constantly dynamic market changes require flexible and future-oriented solutions. We developed the customer proximity and service orientation to one of our most important experiences, in order to be able to offer to you so, a high quality in each regard.

With over six years of experience in the industry and services field in the European market, Middle Eastern countries (Iran, Turkey), and Central and Eastern European countries (Russia, Romania, Slovakia, Czech Republic), Preciturn Group specializes in the manufacturing of mechanical parts (in screw cutting, cold forming and turning). It expands its activities world wild and is able to answer to most of the needs of our clients in turning activity. It represents nowadays a workforce of 360 people and an annual turnover of 40 M€. Preciturn BG Plovdiv LTD is the Bulgarian subsidiary of the group Preciturn. The company is able to turn all type of material such as steel, brass, stainless steel and aluminium. Our on-demand production is exclusively based on drawings submitted by our customers and it starts upon pre-production sample approval. Thanks to the sales department located in France, PRECITURN BG benefits of the experience and the know-how of the group. The team of PRECITURN BG is at your disposal for any further information and shall welcome you with pleasure at Plovdiv. For further information, we invite you to visit our website www.preciturn-group.com and, of course, do not hesitate to contact us for any questions.

For our customers to develop solutions to specific problems is our strength and our daily business. "Quality Performed Metal" is our mission to deliver - and we do so for a variety of industries. Our strengths lie in both the development and construction as well as in manufacturing. Every year we process over 1,200 tons of aluminum, 500 tons of steel and 100 tons of copper to ml-quality solutions. Here, our production base covers from prototyping to small series up to the complete annual requirements for individual customers.

The company ICV GmbH, based in Oberndorf aN was founded in 1990 in Dornhan. Initially the production was focused in the wire-molybdenum spraying of transmission parts for customers from the automotive industry. In 2000 the company moved to larger premises to Oberndorf aN. Meanwhile supplied ICV customers from mechanical engineering, textile industry, paper manufacturing industry, medical technology, electrical engineering and research with high-quality ceramic and metal coatings for various applications. For over 22 years we have been successful with the coating technology and are founding members of the GTS (Association of Thermal Sprayers). Based on years of experience and certifications by TÜV according to DIN EN ISO 9001:2008 and the GTS the quality of our coatings is always assured and reproducible. By working closely with specialist suppliers in the finishing of coatings, we offer you complete part fabrication and repairs includingFinishing at. Through our high level of flexibility very short delivery times are at any time possible, which is especially appreciated during repair coatings from our customers. We finished quickly and cost of the item to mass production. With our method of plasma spraying and high velocity oxy-fuel (HVOF), as well as wire flame spraying and powder flame spraying, we are your reliable partner for metal coatings and ceramic coatings. In thermal spraying, the desired surface materials in the form of wire, rod or powder depending on the application with different methods or melted in a torch and deposited on the surface of the component. The surface is mostly previously roughened by blasting, in order to ensure clamping of the melted particles on the surface. This creates an adherent layer. It> 2 mm are possible depending on the material layer thicknesses.Due to component-specific covers functional surfaces can be partially coated. The strength of adhesion to the edges is limited. Therefore, edges should be> 0.7 mm are rounded with a radius. The surface can be refinished so accurately depending on the sprayed-on material by grinding, turning, lapping, polishing. The coating material may be a single element, an alloy or a composite material. Since no undue thermal stress of the substrate occurs during coating, structural changes of the base material can be avoided. The selection of products and layers is practically unlimited. The coatings are usually made of metals, ceramics, carbides or individually assembled spray materials. The use of thermally sprayed coatings is an advanced and cost-effective method to impart desired properties to a surface. These allow increased performance in the specific application.By the use case fitted surface, often costs can be saved in the base material. According to studies, only 10% of the potential applications of thermal coatings are utilized in Germany.

The company TKM specializes in the manufacture of machine parts of all kinds, complete machine assemblies, construction of tools and devices, to complete special machines. We execute up to 3000 mm in length capable milling, machining parts up to a diameter of 600 mm and a length of 3000 mm length, others strengths are precision production by surface grinding, cylindrical grinding and jig grinding, and Lehrenbohrwerksarbeiten.

Precision turning, Decolletage- and milled parts

The company MK-CNC doo was founded on January 9, 2018 in the Municipal Court of Travnik. We are located in the village of Slimena, Travnik municipality, Central Bosnia Canton. We are engaged in CNC machining by milling metals and non-metals. We do extremely precise positions within +/- 0.01 mm tolerance. We offer top quality services and products, as evidenced by our references, we respond to your inquiries within 24 hours. The company is 100% privately owned.

The company Saage Staircase & bending GmbH & Co.KG was founded in 1952 and is run as a family business in the second generation. In addition to the focus of the stair and railing construction, steel stairs in the system and individual design is the provision of services in the areas of - 2-D laser work (sheets up to 3.0 x 1.5 m) and 3-D Pipe & Profile lasers up to Ø170 x 8.5 m - Plasma Cutting (sheets 6.0 x 2.0 m) - Mandrel bending - Rolling sheets and tubes - Stamping - Edge an ever-growing source of revenue. These fast production times on average 3 - 5 working days. The production is designed for small and large production runs. Besides the mostly highly complex stairs, serves the ConstructionService of more than 3,000 companies of all sizes, the company made a national name in the manufacture of various objects made of steel for well-known artists. No matter what your requirements are our steel construction, with our ultra-modern machinery and highly experienced staff, we face any challenge. Our motto is ... we just machen's!

Founded in 2005, A. Moor Precision Engineering is a medium sized company based in Ostersander. Our main expertise lies in the areas of milling, turning, drilling. We manufacture individual parts and series for machinery and plant engineering, the automotive sector, the commercial vehicle industry and parts for Hydraulikkompomnenten. Our highly qualified personnel made to the latest CNC machines. Are processed technically sophisticated components that are coated or finished as required for reliable firms. On a production area of about 750 m² we work with a highly modern machinery to ensure our customers the highest precision can. Since its founding in 2005, our young and upcoming company has developed into a competent and reliable partner for many production tasks.

Dear Ladies and Gentlemen, we are happy to introduce ourselves as introduced, for more than 20 years's marketplace trading house among other things, for aluminum, and zinc die-cast before. Emerging from the former iron foundry founded in 1908 Green Ingersoll & Prem based in Kirchheim / Teck's activities were concentrated on the trade early 90, the foundry was closed at that time. Renowned automotive and many other industries relied on our quality and delivery reliability. Our know-how helps you to optimize your components, we can supply fully machined and coated. Some of our foundries in Southern Europe and in the so-called low-cost countries in Eastern Europe currently have spare capacity. We are still working to negotiate appropriate contracts with qualified foundries in Asia. So if you are currently or may in the future have 16949 certified foundries need for inexpensive good cast in aluminum, zinc or iron casting range of TS, I would ask you to contact me. Send your request directly to my hands under: a.nemeth@gmkguss.de More information about our company please visit our website at: http://www.gmkguss.de For questions please contact us at any time. With best regards Andreas Nemeth

KÖSTER: Cast components, cable winches and propeller pumps from our own castings The family business KÖSTER is a machine factory with its own hand moulding foundry. Our company history goes back to 1861. For seven generations we have represented values such as awareness of tradition and innovative spirit. We always adapt our product development to market requirements. Our product range comes from our own production and includes cast components, manual and electric winches as well as propeller pumps. We construct, we cast, turn, mill and weld until our Pumps Cable winches, manual winches and electric winches Bath technology, wave machines or lifting floors Cast components or steel components Steel hydraulic engineering and fittings are available to you ready for delivery or operation. Upon request, we will involve you in the development process and thus enable you to exert influence. Whether propeller pumps, winches or cast components: All of our products are designed to withstand the toughest conditions for many years. First-class service: assembly and overhaul Our range of services extends from design, manufacture and delivery of your goods to professional assembly, maintenance and repair by our experienced employees. We deliver complete assemblies ready for acceptance. We also offer our careful maintenance and repair work for third-party products. Reasons for over 155 years of success More than 155 years of success are the result of our customer orientation, whether in flood protection, other hydraulic steel structures or all our other business areas. In addition, the care taken by our employees in the development and manufacture of our products, the ongoing perfection of our propeller pumps, winches, cast components and other products are just as much a guarantee of success as the fact that KÖSTER, as a traditional hoist manufacturer, continues to be managed by its owner family. Our company has been certified according to DIN EN 9001 since 1995.

As long-time experts in the field of equipment and tool construction as well as machining technology, we have metal in our blood. Passion and expertise are the basis of our needs-oriented solutions for small and large production worlds. We would like to introduce ourselves briefly. What we offer: - Equipment construction - Special mechanical engineering - tool making - Single and sample part production Your benefits at a glance: - Planning security: Guaranteed on-time delivery - Maximum availability of your production facilities thanks to high quality products - Always there for you: quick response to inquiries of all kinds - Fair prices We are always available for an in-depth discussion or a non-binding offer. Whatever your individual requirements: With zest for action and technical know-how, we will find a tailor-made solution for every challenge.

Complex tube processing for medicine, water, air conditioning, industry and automobiles

We are an experienced, professional and highly regarded precision engineering company based in Ashton Under Lyne, in the North East of Greater Manchester. Over many years we have built a successful and popular business due to our expanding technology and newly acquired specialised machinery. Woodbrook Precision have the latest CNC equipment and are one of the only companies within a 40 mile radius to own and operate the new to market Mazak Nexus range of advanced Precision Tool Engineering CAD machinery.

Company profile Acom Industry Ltd. is an established supplier of dozens of industrial leaders in Europe and the world. The main activity of the company is concentrating in the development and production of details of cast iron, steel, aluminum and others. We employ highly qualified specialists, constantly engaged in the improvement and modernization of production, as well as in solving complex engineering problems related to the production of parts for the hydraulics, electrical engineering and automotive industry. Thanks to the equipment we have, ISO quality systems, technical skills and competence, we can offer finished products of the highest quality. Why choose us? Innovations in research and development: Specialized team of engineers for CNC processing in metal materials. Professional production solution based on your requirements Quality control: Precise machine and a wide range of measuring instruments - for testing at every step

Wir sind ein Technologieunternehmen, das sich mit komplexen Lösungen hauptsächlich im Bereich der Fertigung beschäftigt. Die Gründung des Unternehmens geht auf Anfang 2016 zurück, seither haben wir ein Team von Experten und spezialisierte Einrichtungen in Pribram geschaffen, wo wir in der Lage sind, alle Projekte zu realisieren. Wir bemühen uns, die neuesten Technologien in unsere Maschinen einzubauen, um die Qualität zu verbessern und Ihre Produktion zu beschleunigen. Bis heute ist unser Unternehmen ein Anbieter von kleinen Einzweckstationen bis hin zu komplexen Robotersystemen. Zu unseren Kunden gehören Unternehmen aus der Automobil-, Lebensmittel- und Pharmaindustrie in der gesamten EU. Wir sind ein kleines Unternehmen mit großen Zielen, das großen Wert auf Kundenzufriedenheit legt. Unsere Erfahrung in verschiedenen Branchen verschafft uns einen Vorsprung und innovative technische Lösungen gegenüber unseren Mitbewerbern. Übersetzt mit www.DeepL.com/Translator (kostenlose Version)

JPM Tools company. for 6 years it has been a producer of subassemblies, structures and components for the railway and machine industry made of carbon steel, stainless steel and aluminum. The company's goal is, above all, customer satisfaction, which we try to achieve by working on the improvement of production and supervision processes. The company specializes in the production of highly complex products, based on the use of cutting, bending, machining on CNC machine tools (milling and turning centers) and special processes: welding