Manufacturer of connecting parts (bolts and screws of diameter 12 mm to 70 mm) for the vehicle, railway vehicle and equipment. Hot forging / hot pressing - On special presses - In the diameter range from 12 to 70 mm - Ranging in length up to 400 mm total length - Production range: Formed by drawing and according to standards - Materials: Structural steels - Low and high-quality steels - Stainless steel CNC turning - Use of CNC lathes of various sizes - Production range: Further processing of hot-formed blanks - Turned parts as per drawing customers - Verbindeelemente after drawing the customer and according to standards Thread rolling - On thread rolling machines of various sizes - In the range M 5 to M 60x2 - Special thread to American or English standards in this area - An extensive inventory of rolling tools available - For special thread rolling tools can be ordered at short notice - Possible methods are also smoothing and knurling Heat treatments of our products - Inductive - Case hardened - Be remunerated - Normalize - And further hardening process on request Surface treatments to our products - Galvanic galvanize - Hot dip galvanizing - Phosphatize - Pickling and passivating - As well as other methods on request

Our company was founded in 1899 the hotel is run by the third and fourth generations of father and son Martin Heinrich Bodenstedtstraße as a metal foundry of Henry Bodenstedtstraße geründet.Heute. For over 100 years, solid craftsmanship and the highest quality standards with the steady willingness to technical innovation are associated with us. In this sense, traditional, our customers know our family- take as a reliable partner in timely processing of routine orders as well as in managing complex technical Herausforderunden.

The Spaleck GmbH & Co. KG is a medium-sized, coming from the engineering company, founded in 1869, located in Bocholt. Our company is family-run by the fourth generation. We currently employ approximately 135 employees at the site Bocholt and approximately 12 employees at the site Greiz in Thuringia. At these sites, we have a turnover of € 18 million. Contract manufacturing has increasingly gained in importance in recent years and this factor is well over 50% of revenue. In particular, the close cooperation with various gear manufacturers has helped us in recent years to considerable growth. For several years we have been certified according to DIN ISO 9001. Modern machinery, considerable investment and motivated and qualified employees meet these requirements. We currently focus both in the field of mechanical and sheet metal technology to the production of small to medium-sized workpieces. A close cooperation with various customers enables us to invest in state of the art machining centers for large parts and thus a significant development. We have recently made a decision to invest in three MAZAK turning-milling centers that take us from January 2010 in the position to manufacture large parts in high quality. These machines can process workpieces up to 2300 mm in diameter and up to 7000 kg deadweight and also perform milling operations with large distances. There are 3 type aircraft MAZAK Integrex e-1850 V. supplemented these machines by a 3D measuring machine.

Gresförder Laser Technology GmbH manufactures high-quality products that are currently available on the market. Since 1980 we offer our customers a first class service and help you achieve your goals. Our 27 years of experience and commitment to excellence have earned us a good name in the field of metal. The core competence of the Department of Metal is the design, manufacture and installation of stainless steel, metal and steel products. Running different projects allows us customer needs, to identify trends and technolgische progress early and this, respektivlich integrate according to our advice in the products. Our company distinguishes itself in the high quality segment: Custom made designer / private area, custom CNC-bent-sawn and recycling of stainless steel, brass, aluminum, steel. With us you get canopies, covers, handles, stairs, railings and doors exclusive advertising medium. Furthermore, we are engaged in contract manufacturing for industrial enterprises. Whether it's small or large series, is appreciated our reliability and fast response time. Very IMPORTANT to us is the consistent quality. Only those who can keep the quality is to exist at the present time also able on the market. Everything is possible in almost home Gresförder! For example, searching one that can provide you with turning and milling parts, no problem you ask us. You are looking for a company that your welding activities in wage work for you takes over, no problem you ask us You are looking for someone who will build a canopy and installed, no problem, they ask us to. You want to have what powdered or wet painted, and are currently not satisfied with your suppliers, no problem just ask at Gresförder. You want to get cut brass or other materials water jet where one asks? Of course at Gresförder As you can see, no matter what you are looking for, you can check the same in Gresförder, and they have one less problem! What we can not manufacture is done by our business partners, with the same care and quality as you would expect from the house of Gresförder. But in order that we can not just tell evidence, we have prepared some photos for you. So that you can see we do not just talk, but we keep our promises.

In 1952 the company was founded by Robert Beck. The company's purpose was to calculate and manufacture of control curves for cam-operated lathes. After a few years, the first factory building was constructed for production of series-turned parts. The company Robert Beck KG now has over 50 years of experience in almost every area of cutting technology. Today, 110 employees work on 4,000 m² of production space. Our employees are the most important factor of our company. Highly motivated, extensive experience and Swabian clever innovation to cope with the team the demanding requirements of our market. The future begins with training. Robert Beck relies on in-house training to promote the highest possible qualifications and integration of young people. In the interests of employees, customers and the company.

The COHN coil springs + equipment manufacturing GmbH produced in a more than 70-year tradition not mass produced, but individual and small productions. An order therefore includes no more than 2-50 pcs in individual and small productions. But of this, our company also stands for the timely and detailed manufacture of the products. Our company operates with 16 trained and quality conscious employees pure contract manufacturing and works in a two-layer system from 7:00 bis 23:00 clock. In addition, we supply our product range "feathers" which among other things Laser, the dental and optics industry.

Machine components fully to painting, Welding parts up to 5 tons, Turning and milling parts Locksmith (punching, bending, pressing), Plant generally, Vehicle parts and vehicle bodies, Lohnsägearbeiten

We are experienced sheet metal workers in the field of thin sheets up to 5mm thickness. Our core competence lies in the processing of perforated metal sheets, which are sourced from MEVACO GmbH or SOLVARO KFT. Both companies are among the largest perforated metal manufacturer in Europe. Due to the different orientation of the two companies in craft and industry demand, we can react optimally to your needs. Both MEVACO GmbH and SOLVARO KFT are customers of our company and appreciate our simple, flexible, and timely order processing. In the area of contract manufacturing, we have established ourselves and can intercept your excess capacity. Whether simple or complicated cuts assemblies, we are your reliable partner. Through the use of an ERP system, we can guarantee a professional order. When it comes to the preparation of detailed work plans, parts documentation or sample test reports, we leave no gap in your production process. For the benefit of your individuality and our performance, we are not certified. If needed, we ask ourselves, however, like to a single audit. We process steel up to 4.0 mm, chrome-nickel steels and aluminum up to 3.0 mm to 5.0 mm thickness. Small quantities in the standard formats up to large format 1500.0 mm x 3000.0 mm. If you take 3 tons of special formats can be realized. Our services include cold working. We can realize with our special CNC controlled press brake and a large well-thought tool park also difficult folds. Give large thigh mass are realized by the distance between columns of 3100.0 mm. (Bending / folding) With our 3 roll bending machines we can tubes up to max. Produce 2000.0 mm in length. Rectangular blanks are manufactured inexpensively with a guillotine shear cut length max. 3000.0 mm, and for the attachment of Eckausprägungen we are using a combination of solution Eckschere with punch unit (punching) equipped. Do you have standard parts we can implement your cuts on our nipple punching machine cost with all the contours and mounting holes. Welding (welding) will be performed for you by our experienced and certified specialists. We are especially proud of our valid license for welding on aerospace equipment according to DIN 29591-141-PB.

2R Industries offers the expertise of its team and its experience in the implementation of this technology and has a range of machines capable of solving the main problems of cutting and trimming of your materials. - Machine pure water - Machine thick - 5-axis machine The development of cutting programs in 2D and 3D is performed using CAM software from: - Files - Parts Models - Plans - Definitions Digital (all platforms) - Drawings ... - Cold cut so no heat affected zone. Speed - No tools to achieve, which results in short time. Accuracy - Pure water of the order of + / - 0.1 mm for materials of low hardness, according to thickness. - Water + abrasive: the order of + / - 0.05 mm for hard materials according thickness. Certifications: Quality system in place referring to ISO 9001 V2000 for our certification Reactivity - Implement without delay the changes requested by our customers. Flexibility and availability - Internal organization for dealing with occasional overloads. Our internal organization

Index doo Gracanica is tatig since 1986 in general mechanical engineering. In cooperation with Bosnian Waermekraftwerk, mines.

We specialize in sheet metal processing and create solutions for our customers to optimize their own Produktuonsaufgaben. We go beyond the usual activities of a working according to customer drawings contract manufacturer also clear. Our erfaharenen engineers and trained on the use of sheets practitioners drawn up on the basis of the objective of the client, alternative production proposals that utilize our manufacturing facilities optimally and thus release potential savings. Of course, the required quality is always ensured with this approach. We have a modern machine park, which makes it possible to satisfy diverse customer needs.

Engraving, industrial engraving, embossing, marking systems, CNC engraving, laser engraving, CNC turning in small series, CNC milling of small series

Dear Ladies and Gentlemen, the company SSD-precision technology GbR was the gegründet.Seit ago, we are represented in 2008 on the market for contract manufacturing. We are very strong in the fields of mechanical engineering, special-clutch technology as well as in the Obtikbereichen and are constantly striving to expand our processing areas to meet the customers and today's high demands. Since 2009, we had the title 'master craftsmen in precision mechanics' and therefore as of 2010 strive to young people to enable a training position in our company. We process all machinable materials such as: all common steels, non-ferrous metals and plastics, etc. in batches of parts up to series production. We would be pleased to contact you. Sincerely yours M. Sobon Geschäfstleitung

We are a young, dynamic and above all flexible team and finished injection products of cheap mass-produced goods to complex and neutechnologischen small series and prototypes. A spray range of 0.1 g to 500 g / shot is possible with us. We are ISO 9001:2008 certified and translated a zero error rate to our destination. Please feel free to contact us, we will convince you! Our range of services includes: - PVC exception - the processing of all thermoplastics - The processing of various compounds - Parts production from 0.1 gr to 500 gr - In the pressure range of 200 KN (20 tons) to 2500 KN (250 tons) - The production of small series - Custom injection molding process - Custom color mixes - To and gating of inserts - Production of case and removing items - Design and development by qualified designers and CAD tool and Mold maker - Manufacture and sale of drive wheels for table top chains - Assembly and packaging of multi-part articles

BR.AL.CO S.A was established in 1975 when it first started, the company was involved in mould constructions. Today, BR.AL.CO is involved in pressure die casting and trading in accessories made of aluminium, brass, Zamac, in mould constructions and providing other services such as electrostatic painting, finishing, sand blasting, etc. Its facilities are located in the Industrial Area of Thessaloniki the privately owned property of 4.850 m2 The factory has fully organized toolroom, foundry, processing, electrostatic painting, quality control, montage, packaging and storage areas, ensures the production of high standard, quality products. Management and senior staff enthusiasm for their work, experienced and fully trained personnel, use of very modern equipment, implementation of quality systems with ISO 9001:2008 and ISO 14001:2004 certification, production of high quality products and consistency in the services provided to its customers have established BR.AL.CO as one of the top and most reliable companies in its line of business in Greece.

The company Saage Staircase & bending GmbH & Co.KG was founded in 1952 and is run as a family business in the second generation. In addition to the focus of the stair and railing construction, steel stairs in the system and individual design is the provision of services in the areas of - 2-D laser work (sheets up to 3.0 x 1.5 m) and 3-D Pipe & Profile lasers up to Ø170 x 8.5 m - Plasma Cutting (sheets 6.0 x 2.0 m) - Mandrel bending - Rolling sheets and tubes - Stamping - Edge an ever-growing source of revenue. These fast production times on average 3 - 5 working days. The production is designed for small and large production runs. Besides the mostly highly complex stairs, serves the ConstructionService of more than 3,000 companies of all sizes, the company made a national name in the manufacture of various objects made of steel for well-known artists. No matter what your requirements are our steel construction, with our ultra-modern machinery and highly experienced staff, we face any challenge. Our motto is ... we just machen's!

Founded in 2005, A. Moor Precision Engineering is a medium sized company based in Ostersander. Our main expertise lies in the areas of milling, turning, drilling. We manufacture individual parts and series for machinery and plant engineering, the automotive sector, the commercial vehicle industry and parts for Hydraulikkompomnenten. Our highly qualified personnel made to the latest CNC machines. Are processed technically sophisticated components that are coated or finished as required for reliable firms. On a production area of about 750 m² we work with a highly modern machinery to ensure our customers the highest precision can. Since its founding in 2005, our young and upcoming company has developed into a competent and reliable partner for many production tasks.

Company description The company EN-Tec GmbH manufactures for renowned companies from the areas of the automotive industry, electronics industry and automation technology. Our production range covers the following areas: Prototyping Electronics housings, front panels and heat sink Small batch production / mass production Assembly manufacturing 3D milling incl. Construction Mould Manufacturing of sheet metal stamping dies Design models CNC milling up 1020x620x500mm travel (5 axes) Wire EDM 250x400x400mm (30 degree clearance angle) Turn CAD / CAM programming with Mastercam and Vector All data formats can be used, eg: Catia V4 / V5, VDA, IGES, SAT, DWG, Inventor, DXF, SLDPRT With you as a team, we design and manufacture according to your wishes and ideas.

Element Six is a leading global manufacturer of highly wear-resistant materials, such as industrial diamond and tungsten carbide. Our product range includes tungsten carbide materials and components for: - Inserts and drill bits for tools for use in mining and tunneling, as well as in oil and gas drilling. - Wear protective in metal processing, medical, textile and engineering industry. - Mill rolls for the steel, tube and pipe industries. - Chisel for road construction, mining and tunneling. The E6 Hard Materials Division, headquartered in Burghaun is responsible for the production and distribution of carbide products and steel rigid metal assemblies.

The ISAF Group began its consolidation in the year 2007, with a takeover by the current management, which has continued to invest over the years, acquiring other companies of the group. The ISAF Group currently consists of several autonomous corporate structures, mainly specialized in the processing of sheet metal, each being equipped with the latest technologies. The Group enhances the experience of its staff with constant training and updating, keeping up with the best manufacturing techniques, increasing professionalism gained through previous work experience by adding to it ISAF’s skills and expertise The Group's philosophy has allowed the development of consolidated relationships with its customers, providing an updated, responsible and on time service, able to support a diversified production. The Group also cooperates with selected suppliers to guarantee the availability of the best raw materials and the achievement of the required objectives, according to high quality standards.