Looking for a supplier for a wide selection of high precision metal parts? ... an experienced manufacturer for punching and bending tools or tool parts? We have been more than 20 years of professional and reliable partner for leading industrial companies. Since 1995 we are certified according to ISO 9001:2000 and ISO 14001:2004 since 2007. 70 highly qualified staff guarantee meet the highest quality standards daily. We specialize in the manufacturing of Bihler punching and bending machines. These machines are characterized by high productivity and high degree of automation. On Bihler machines we manufacture complex parts up to a maximum forming force of 1000 kN, including tapping, welding and assembling. A 1600 kN Emperor punching machine complements our production possibilities. The combination of punching and bending by laser welding offers enormous material savings potential because it can replace metal-cutting manufacturing methods, such as turning or milling.The high energy density of the solid state laser allows the same high process speeds as in automated punching and bending. The thermal load of the workpieces is small. The process is constantly monitored. Manufacturing Solutions with integrated laser welding are fast, accurate and economical. When developing your parts we work closely with the world leaders Bihler and Trumpf. From the beginning, mold manufacturing and mass production were part operated side by side. The constant, fruitful feedback of the experience and creativity of the employees of the two areas is critical to the success of our company. Tools for chipless metal machining according to their own or according to customer drawing for parts production in our house or with our customers made. Our tool room is equipped with modern facilities, including seven three-wire and die-sinking machines and modern milling machines. Leading Punching can be manufactured at Wörgartner tool spare parts. Wage tools are tested in-house. This saves time and gives us for our work valuable feedback. For the testing of Bihler tools are us RM35, GRM50, GRM80, GRM80E, MC42, MC82 and a Mach 1/7 available. In conventional stamping machines are possible tool trials under production conditions up to a force of 160 tons on a 1600 kN Imperial press. The maximum tool length is 1250 mm.

Precision metal processing Company focused in turning complex part with precision and mainstaining the same using CNC-Technology to archive best results. At the core of our CNC services is a passionate, young team of machinists and engineers.

SAKKA Mechanical Industries (ESIM) is an engineering company established in 1989. We specialize in the design and manufacturing of molds, as well as precision machining of parts. Over the years, ESIM has expanded its expertise to meet the evolving needs of the industry, continuously adapting to new challenges and technologies.

Our main profile: Powder coating Precision Sheet Metal Punching, cnc Component manufacturing Corrosion protection We offer a complex service: - Planning the production of the components ponents surface treatment. Our company started as a small family business in 1997. The company started its production in a 300 m2 building with only an oven for powder coating. Today we have a 11,000 m2 - Production line with a 2000 m2 hangar. In the beginning we had only 4 employees, today we have a staff of 18 employees. From the beginning it has been our goal to produce quality products and to show our customers our best side. Due to our high quality standards, we were able to build long-term relationships with both national and international partners. Our company still operates as a family business, which helps us to keep administrative costs and our prices low. To adapt to the market, we introduced a service, which affect not only surface treatment, but also the complete production of equipment and spare parts in close cooperation with metallurgical enterprises. Our goal is to offer perfect services to our customers. Iso 9001 wiki

Bergplast Kunststoff GmbH & Co.KG is an owner-managed medium-sized company Family business with headquarters in Upper Franconia directly on the motorway A73. With our currently 50 employees we produce technical thermoplastic parts made of reinforced and unreinforced plastics in 1K and 2K processes. Our injection molding machines include tonnage sizes with clamping forces of 25 t. up to 350 t. In addition to the production of technical injection molded parts, the production of the associated injection molding tools is part of our service portfolio. Change requests of the customers are not a problem for us, because we have our own construction in addition to our toolmaking.

is a strongly growing, independent, family-owned company with a tradition of more than 120 years. is known for its innovative solutions based on the forming of wire, tube and strip material. offers extensive research and development services at an early stage and is a development supplier of OEMs and system manufacturers. offers an extensive range of services, from forming, joining and assembly technologies to surface treatment via machine and tool construction. is present at international level and has production sites in eleven countries on three continents.

The company STATEC GmbH & Co. KG is a medium sized company based in Wilting, district Cham. Our production range includes the punching and laser technology, the folding and assembly and deburring and straightening of sheet metal parts. We use black sheets, galvanized sheets and aluminum and stainless steel sheets. Through our modern machinery and our qualified staff we guarantee the best quality. The close collaboration with the Johann Stoiber GmbH, which specializes in Metal Aluminiumschrankbau, additionally opens manufacturing facility.

Feinguß Lobenstein GmbH has been a dependable partner for various metal-working branches for decades. The applied process technology of ours, the “investment casting technology” , is adequate for items from 0,001 kg – approx. 60 kg (max. dimensions 500x350x350 mm). We cast more than 250 different steel and nickel base alloys. In that process we guarantee best quality, highest precision and surface finish as well as the exact abidance of the agreed material characteristics. We are able to realize your orders within a short time and at fair prices. Necessary tools are built in our own powerful toolmaking. Rapid-Prototyping also belongs to our service offering.

Visit our website

Specializing in the bandwidth Many years of experience and professional qualifications of the staff make our company a specialist over a wide bandwidth. This applies to the materials as well as for the manufacturing process and the various branches of industry. From the technological advice on the procurement of materials to the delivery of complete subassemblies our customers find us a competent partner. We process all machinable materials such as steel, cast iron, stainless steel, non-ferrous metals, aluminum, etc. Kuststoffe Power spectrum CNC - Turning The manufacturing sector is turning a focus of our production, where machines are used in horizontal and vertical construction, some with automatic loading device and a double-spindle lathe. Also workpieces on multi-axis lathes with counter spindle, bar loading magazine and powered tools can be produced. We process all machinable materials such as steel, cast steel, stainless steel, non-ferrous metals, aluminum, etc. Kunsttoffe CNC - Milling In modern CNC machining centers we mill, supported by powerful CAD-CAM systems, complex engineering components with highest precision, often in one setting as small, medium or large series. * The advantage of our CNC milling are far-reaching and result from our extensive park of machines and machining centers: Vertical CNC milling machines * Vertical CNC milling machines with pallet changer * Horizontal CNC milling machines with pallet changers or pallet pool * Vertical-5-axis simultaneous CNC milling machines This diversity allows therefore for each individual case a specific selection of the system to be used, both in manufacturing aspects as well as in terms of cost, so that always excellent value for money can be achieved. The terms 5-axis milling and 5-axis simultaneous milling sound almost the same. Both software technology and in terms of technical production possibilities lie between the two methods, however, worlds. The "simultaneous" variant, ie, the simultaneous control and motion of five axes, opens up new horizons in the design and manufacture of complex geometries, open spaces and 3-D surfaces. Machining In addition to the main areas of production CNC turning and CNC milling we also offer other machining options. Thus we are able to provide our customers with a fully machined and ready to install a system component. Possibilities of machining: * Machining with geometrically defined cutting edge o Drilling o Threading o spaces o rubbing o saws * Machining with geometrically undefined cutting edges o honing o loops o Radiation Component manufacturing A complement to our range of products and services is the assembly of components according to individual customer requirements. According to customer order we process in our in-house manufactured parts together with purchased parts or customer-supplied products to mechanical systems and electro-mechanical assemblies. As a result, they will receive a complete and ready to install system part. Including all desired surface treatments and electrical installations. Upon request we provide them the assemblies to your specifications tested and logged available.

SOMEIL is specialized in zamak 5 (z410 / zinc alloy) high-pressure diecasting and electroplating treatment (nickel or chrome finishing) in-house. We have human and material resources to assist you from the Mold design/manufactoring to delivery of the final product. We are certified by ISO 9001 since year 2000. Currently, our Quality Management System is certified to ISO 9001:2015. Contact us for more information.

We are an important supplier for OEM (Original Equipment Manufacturer), who specializes in the production areas of medical technology, precision mechanics, pump technology and the processing of demanding materials. Thanks to our many years of experience, we can offer our customers extremely competent support for the high demands placed on the qualification and validation of medical devices. Diener AG's know-how and degree of specialization are set up in such a way that, from the customer's point of view, high technical production requirements can be set and thus comprehensive services can be provided. Our core competencies are in the following areas: • CNC milling • CNC turning • Surface treatment (in the form of blasting, passivation and laser marking) • Cleaning and packaging (ISO class 7 clean room) • Assembly of assemblies for implants, instruments and pumps. The external vision of Diener AG lies in the unconditional quality policy, the concentrated customer orientation and the ongoing value creation through innovation. In order to meet the demanding requirements of the products to be manufactured, the company relies on versatile employees and supports their promotion.

Presentation of PTM Präzisonsteile GmbH Meiningen We are a medium-sized company with around 110 friendly and competent employees, which has been producing high-quality CNC turning, milling and erode parts in small and medium-sized series for demanding customers since 1994, e.g. from medical technology, Lienar & drive technology, Laser technology, optical technology and measurement technology. In our own electroplating shop, we anodize aluminum parts. Our offer also includes the pre-assembly and final assembly of components and devices. Our service portfolio: - Turning & milling for small / medium series - Electrical Discharge Maching (EDM) - Surface treatment of aluminum (small and medium series), including sandblasting and vibratory grinding - Ultra-fine cleaning - Module assembly - laser marking Our machine park: - 21 Milling machines, including 11 5-axis machining centers - 11 Lathes - 1 EDM machine - 3 Sandblasting systems - 4 Polishing vibratory grinding - 3 Grinding machines - 1 Anodising plant - 1 Laser marking machine - 1 Cleanroom packing - 1 Ultra-fine cleaning On a production area of approx. 4,000 square meters, we have a production capacity - in 3-shift operation - of up to 180,000 turning & milling machine hours p.a.

Malkoč tehnika doo was founded on 1986. We offer turning, milling, welding, grinding services. We are equipped with classic as well as CNC machines. Our company reinvests large part of its profits in procurement of new machinery, education of its employees and improvement of technological solutions.

Hexamec, Lda. is a dynamic and innovative company specializing in precision metalworking, backed by a technical team with over 20 years of experience in CNC programming and quality management. Although recently established, Hexamec leverages its extensive expertise to deliver high-precision components tailored to meet the unique requirements of each client. We are committed to providing exceptional quality, with stringent quality control measures in place, including advanced measurement equipment and certified raw materials. While we are not yet ISO 9001 certified, obtaining this certification is a key objective as we continually strive to enhance our quality management systems. At Hexamec, we understand the importance of meeting deadlines, and our streamlined processes ensure timely delivery without compromising on precision or quality. Whether you require custom machining solutions or high-volume production, Hexamec is equipped to exceed your expectations with a focus on reliability, precision, and customer satisfaction.

JOBO Spezial-Maschinen GmbH was founded in 2012 at the Vechta location. A manufacturing facility with an associated office building was built here in 2015. As a young company, JOBO would like to establish itself as a manufacturer of machines for the national and international market in the near future. Particular attention should be paid to the optimization of existing and the development of new concepts for machines for use in swamp or moorland areas. In addition, JOBO will deal with systems and equipment for the oil field industry, pipeline laying and controlled drilling technology. JOBO will work out the customer-specific special solutions that are often required here together with the respective customers. JOBO's range is supplemented by the areas of procurement and trading of equipment and devices from the above-mentioned segments on the international market. JOBO employees with the necessary experience in the respective specialist areas are available to implement all of these tasks and goals. In the future, JOBO will continue to supplement and expand the workforce with competent employees. JOBO hopes to be able to offer young people an apprenticeship position in the future

ALATNICA "SPALAT" was founded in 2002 as a small tool shop. We manufacture stamping dies, injection molds, jigs, extrusion dies for rubber profiles and extrusion dies made of tungsten carbide for copper profiles. In addition, we manufacture precision parts as per customer drawings. We also offer custom work in the following categories: - WIRE EDM - Sinking EDM - ROTATE - MILLING - SURFACE GRINDING - PUNCHING