Torneria Automatica Faentina was founded in 1981 by Enio Pasini and Giancarlo Misirocchi, at the time employees of CISA, a leading company in the production of locks and passive security systems. In rented rooms of 350 square meters, the two workers thus founded the first automatic turning shop in the Faenza area, which has grown over the years with customers and machinery. In 2006, the company moved to its new headquarters (about 1500 square meters) which allowed to optimize the production of hinges for locks, passive security systems, fittings for hydraulics, inserts for the plastic injection sector. Processing in close contact with the customer The qualified and experienced staff of the company is at the complete disposal of customers to create small parts that can completely satisfy the different needs and requirements: the products are made to customer design and the processing takes place in close contact in order to ensure the excellent result of the product. TAF guarantees manufacturing punctual efficient with excellent value for money Whatever your design or need, the company based in Faenza will do everything to create a product in line with your needs and that can last over time. For the production of quality turning and small parts products, it is necessary to work with efficient and safe machinery, following the latest technologies developed on the market: TAF, based in Faenza, has a quality machinery fleet thanks to which the company's qualified and experienced staff is able to produce precise small metal products also according to the customer's design. The brands of our lathes: BIGLIA CITIZEN DMG GILDEMEISTER GRAZIANO STAR Cleaning of parts and anti-rust treatment Upon customer request, TAF performs the washing of small parts with anti-rust treatment: the protective is a highly water-repellent fluid product that leaves a thin film on the metal surfaces, which can be removed with petroleum solvents of any type. The service allows the warehouse protection of steel and metal products which will thus be protected from oxidation: the company based in Faenza has integrated the anti-rust product into its solvent-based metal washing machine which at the end of the washing cycle automatically performs the anti-rust treatment .

Our company has your work in 1998 started as a Einman companies, the metal-cutting shaping has offered. Thanks to consistent investments since 2005 in machinery and in our employees, the company has developed strongly, expanding its range, the quality of products and punctuality improved. In 2007, the company has moved into a 1300m2 hall. Now we have a highly modern machinery, employ over 30 qualified and experienced staff to a work surface of 2100 m2. In 2008, our company has been certified with the ISO quality assurance certificate 9001 2001. Our strategy is to anticipate the needs of our customers and to satisfy them. The company realizes this through the production and sale of competitive products and services of the highest quality. Special advantages of the company are the experience, expertise, in terms of production technology, the machinery, the solid cooperation of our technologists and customers already in the concept phase, rapid repair of production and continuous optimization.

Small, young company from Slovakia. We are focusing on precise parts with small tolerances. Owner of a company is also a programmer and setter, with more than 15 years of experience in machining, many years of experience are from foreign countries. Our motto is "quality by any means". We are selling only 100% precise and good parts, we never had any complaints from customers. We never had to repair any parts. We do check every part, it means our control is 100%. We are honest and transparent. We are looking for customers with the same quality properties.

KAMIR, a company working in Słupsk's special economical area, specializes in sheet metal working and robotic welding. The main activity is based on welded bodies for different machines and devices, spare parts and other steel products production for needs of different companies. The 0,5-120 mm sheet metal and also all available steel profiles, bars, are used for production. The Kamir firm was formed in 2000. The basic area of activity of the firm became the production of metal products from sheet metal by machining and plastic forming. From the beginning we concentrated on high quality of products and services with dynamic development focused on process automatisation. Currently we have 14 industial robots working in our company. Taking account of our experience, abilities and highly automated machine park, we offer you high quality product execution from metal sheet by cutting, shearing, pressing and bending. Our object is to meet you expectations and requirements. We place at Your disposal a young, qualified staff and ample technological resources including digitally controlled machines. Due to the operation in the firm of the Quality Control System according to the standard ISO 14001:2004; 9001:2000 and systematic training of employees, we guarantee the high quality of products and services.

SYKATEC Systeme (Systems), Komponenten (Components), Anwendungstechnologie (Applications Technology) GmbH & Co. KG started business as an independent company on 1 April 2001. Our 310 members of staff are fast, efficient and flexible in dealing with customer requirements. We do not only manufacture products to order on a sub-contract basis, but also aim to be reliable partners for our customers - from development of parts to production and ultimately to the logistic challenge of putting parts at your disposal. Put us to the test - we look forward to the challenge. Our Services * Heat sink processing * Sheet metal forming * Component manufacture * Cable packing Convince yourself of a production department worth inspection and testing. After all, SYKATEC is certified with regard to its quality and environmental management system in accordance with DIN EN ISO 9001 and 14001. We also hold a welding licence for rail vehicles and rail vehicle parts in accordance with DIN 6700 Part 2 Class C2. The German Federal Railway´s (DB) directive 951 "Quality assurance for welding of rail vehicles and their components" is applied to orders placed by the DB. SYKATEC´s management system is aimed at constant improvement. The goal is to increase the quality of our products and processes, thus always assuring your, the customer´s safety.

About Us With know-how and competence SCHIESS in Aschersleben designs and manufactures integrated solutions for international mechanical engineering. Efficient manufacturing technology All machine tool series of SCHIESS have been redesigned since 1997, making them the most advanced large-scale machining centers of its kind. They guarantee high productivity and profitability for your production with faster throughput at lower costs. The already installed machining centers of the machine series Horimaster and Vertimaster prove the reliability of our machine tools. Wide range of differentiated tasks With the part production, a productive external manufacturing for high-quality workpieces made of cast iron, steel and aluminum is available for demanding production tasks of many branches of industry. In times of limited investment volumes, service and modernization of machine tools are becoming increasingly important. The retrofitting service group forms another division of our company. Products Our customers need precise, versatile large machining centers for increasingly complex machining tasks with increased productivity, reduced downtime and resetting times. Our machines of Vertimaster and Horimaster series solve these tasks with flexible systems technology and sophisticated detail solutions. Quality is strictly assured according to DIN EN ISO 9001. The master head principle - quick head changes for differentiated processing tasks Machining heads with CNC-controlled swivel axes are standard equipment as well as the head and tool changing system in pick-up mode. Powerful round and rectangular rams allow the calculation of machining time with maximum machine utilization; time-consuming changeover times are eliminated. Special attention is paid to customer-specific modular solutions; they offer optimum adaptation to the machining of the desired workpieces. We are your partner - A specialist in the processing of complex and highly accurate components High accuracy in the shape cutting, long service life of the machines and flexibility for a variety of machining tasks. Contract Manufacturing Our parts department has a large capacity. Thus, we are able to produce not only for our own needs, but also to machine parts and assemblies for the German and European engineering. This division provides our customers with precision machining of high-quality workpieces made of cast iron or steel. We manufacture high precision, medium and large parts properly and on schedule.

INOXDEA is a young family business based in Erbusco (BS), Northern Italy, with a twenty-year experience in stainless steel processing. Ever since its foundation, InoxDea has specialized in products and services destined to the food industry, such as contract manufacturing of machinery and spare parts for sealers, packaging machines and fillers, as well as for the gastronomic, the confectionary and the tinned food industries. INOXDEA can also assemble and deliver preassembled small groups or sub-groups of machines and implants. Our headquarter covers a surface of 3000 m2, thereof 200 m2 occupied by our offices, and has 1750 m2 dedicated to our manufacturing sites. We constantly improving of our production and delivery process, in order to assist our customers in every phase of the production and craft high-quality products. We are equipped for the following realizations according to customers’ requests and designs Steel Processing: • Cutting • Pipe Cutting • Bending / Clinching • WIG und MIG Welding Finishing: • 2B-Sheet • Satined – Scotch–Brite We dedicate our undivided attention to the details of the final product and to our customers’ satisfaction. Thanks to our machine park we are able to realize steel sheets according to Your indications and guarantee the perfect quality. Thanks to our just-in-time (Kanban) principle we are able to minimise the stocking time, guarantee a fast delivery, optimise the production process and consequently reduce the waste. By means of suitable softwares, our quality management and technical office can assist, test and scrupulously follow every product in every phase of the production. REALIZATIONS • Tubular Structures • Filling Funnel/Funnel • Filler • Sealing Machines • Stainless Steel and Scotch Brite Cooling Troughs • Vacuum Pipe Collector • Framing for Multihead Weighers • Electrical Enclosures • Platforms SERVICES • Laser Cutting • Laser Pipe Cutting • Plate Bending • Assembly of P.V.C.- Pipes with relative equipment Our motivated Team works two turns therefore can realize the products with reliability and precision for Our international customers. We are eager to examine Your own projects or models and to submit a concrete offer. In case You need further information or clarification, please do not hesitate to contact us.

Orfanidis Anastasios, having ORMIT as its distinctive title, from the early years to today’s rapidly changing environment, maintains a history of continuous effort, challenges, and evolving technical experience. The company started operating in 1991. Over the years, it has been transferred to privately-owned facilities in the Drimos, Thessaloniki. Since then, the company has begun its investments in the CNC machines sector, starting the course towards a higher level of technical knowledge and experience, as well as a higher degree of flexibility.

Machining company with 50 cutting machines and an affiliated locksmith shop. Rotate: Long and short turners up to 32mm Turning and milling from bar to 90mm with AGW Turning and milling of inserts up to 300mm with AGW Milling: 3-axis, 4-axis and 5-axis milling machines Sheet metal processing: 2D laser cutting in large format Laser tube cutting welding work: MIG/MAG, VIG/TIG and laser welding

We are a young, dynamic company based in Laufach. Since the foundation, we have built up modern machinery for high-quality metalworking on a production area of more than 450m². From small to large series, from the raw part to the finished end product, we are your contract manufacturer. High quality and adherence to deadlines are a matter of course for us and are just as much a part of us as customer loyalty. Our 4 axis horizontal machining centers are equipped with up to 8 pallets and 150 tools to process large series. All vertical turning centers are equipped with powered tools and indexing belts to deliver competitive prices "Made in Germany".

Gerhard Kurz Plastic injection molding Dr.-Muschak-Strasse 18 87600 Kaufbeuren

We are committed to improve and strengthen your products. We place at your disposal and to the service of your projects the whole of our company: design, technology and quality. Let us be a part of your team. Our company Factor is a company whose activity is the in-line machining of special parts using CNC spindle lathes (bar cutting) and the cold stamping of screws. We have had both national and international market presence for more than thirty years in sectors which require a technological product with a high added value. Our corporate strategy is based on 4 pillars: Continuous investment which guarantees the continuity of our project. Innovation as the culture of continued improvement. Industry for our passion of creating components which materialize our customers’ ideas. Internationalization as vocation for the geographical expansion of our management model. Among the advantages for our customers, we highlight the following: Cutting-edge equipment which guarantees a high reliability, repeatability and competitive finishes and prices. Know-how and experience gained during our wide track record make us posses a high level of product knowledge and processes. Highly qualified staff and focused on customer satisfaction. More than 50% of our staff are university graduates and have specific training in the machining sector.

The company MDTEAM Sp. z o.o. offers you CNC machining services, welding services (MIG / MAG / TIG / MMA). We mainly provide single and small-lot services. We work on the basis of 2D and 3D documentation as well as on the basis of delivered parts. We also provide sheet metal bending services for medium and large series - from 1000 pcs. Please feel free to contact us.

More than 60 years of experience in the production of highly complex and demanding turned and milled parts, including all other accompanying work processes, have made us a recognized partner and preferred supplier of the most important companies in the metalworking industry

Since 2012 we have been supplying sophisticated parts from casting, sintering, welding and construction metals according to drawings and specifications for industries such as: B. for mechanical and plant engineering, wind turbines, the metallurgical industry, power plants and steel construction. We cast iron, steel, stainless steel and high-alloy steel parts for various industrial uses. Our production site is in China. We represent our foundry in Germany as well as other partner foundries in China, all of which are qualified according to ISO9000/9001. They are also certified by SGS, TUV, CE, AD2000, etc. Quality is our top priority. We supply customers with products that are 100% tested. In addition to normal operational quality controls, we also carry out product-related tests according to customer specifications, from prototypes to series production. The desired certificates or acceptance reports are included. We are constantly striving to create more benefits for our customers, saving them more time and money.We react quickly to every customer request for project processing and changes. We supply customers according to the desired Incoterms conditions, also duty paid. We take care of everything until the goods are delivered. Furthermore, we also offer cutting tools for metalworking, in particular common PCBN / PCD / CVD indexable inserts and tools, special special inserts and special tools, as well as solutions for industrial production. We have the "Cost Reduction and Productivity Increase" experimental program, where our customers have saved tooling costs and you can save too.

PE "NARYZHNYI INDUSTRIES GROUP" is one of the largest Ukrainian suppliers of spare parts for fuel equipment. . NARYZHNYI INDUSTRIES GROUP has been operating in the market of fuel equipment and spare parts for trucks and agricultural machinery since 1996. Since 2000, we have started our own production of plunger pairs and high pressure sections. img Why NARYZHNYI INDUSTRIES GROUP? The machine park of our company numbers more than 100 units and includes a full range of processing equipment: 20 turning and milling CNC machines, grinding, horizontal boring and others. The plungers are ground at high-precision Swiss equipment. Most of our employees were trained in Germany, where they gained incomparable experience. The company has implemented a system of international quality standard ISO 9001 certificate В№ UA2.003.03554-09. Our specialists are constantly researching new advanced technologies for manufacturing plunger pairs, studying consumer demand for fuel equipment, and working on improving the products in accordance with world standards. We have our own tool shop where sharpening, regrinding and manufacturing of metal-cutting tools, both carbide and high-speed steel, are carried out.

MEC4I - Mechanical Cluster for Innovation is a group formed by 5 companies operating in the field of precision machining. Actually, the group have 40 NC centers (turning, milling EDM); of these, 12 are 5-axis. The group employs more than 100 people. The manufactured parts are used in many different applications, including aerospace, defense, oil and gas, packaging, biomedical, motorsport. The business proposal is manufacturing of mechanical parts on drawing, both as individual pieces or assembled groups. There is also the capacity to operate as prime contractor for the management of complex systems.