Big series, small series, plane, bent or embossed - the Hornig GmbH stamping provides precision parts from all stampable materials, in any form and any desired number, with or without surface. Our specialty is the processing of stainless steel. small series punch to bend surface own tool stainless steel steel Brass copper family business Translation by Google Translate

Osthoff precision mechanics deals with the production of mechanical components made of ferrous and non-ferrous metals including hot or surface treatment. With modern machinery we can process in one setting when producing complex qubischen and rotationally symmetrical components five or more pages. The advantages are shorter lead times, precise positional tolerances, no re-clamping and a better quality / price ratio. 1980 Company founded by toolmaker and master mechanic Horst Osthoff. Repair and rebuilding of HSS and solid carbide special tools. Parallel conventional production of turned parts for the tool. Mid-80s conversion of the machinery on ground-controlled machine tools, CNC milling and manufacturing focus. 1986 Development of a universal multi-position measuring system, in particular for use in rotationally symmetrical parts. This measuring system is trademark protected. 1995 Development of a device for the removal of Abstechbutzen of turned parts, with subsequent patenting in Germany and in the USA. Since then, complete machining of mechanical components made of ferrous and non-ferrous metals, including hot and surface treatment. Primarily production of small series with numbers from 5 to 200 pieces, but also series of up to several 100 parts. 2001 Introduction of a quality management system certification, the company according to DIN EN ISO 9001/2008. The customer base is located in the mechanical and automotive engineering. Own developments: * Butzenentferner * Universal multi-point measurement technology

The Weber metal technology is a nationwide operating company. With competent and enthusiastic staff we'll do a variety of tasks for our customers as a supplier in the field of laser material processing.

Vicast Metalurji was established in 2023 to produce heavy-duty cylinder heads and engine blocks. Since then, our company has continued to grow, and in 2024, we launched our second factory. Currently, we operate in a total area of 3,500 m², with 2,000 m² of it being enclosed, manufacturing cast iron and spheroidal cast iron products for the automotive sector. As Vicast Metalurji continues to grow, it continuously sets new goals and continues to invest, responding to customer requests and demands in a timely, high-quality, and sustainable manner. Our company specializes in producing spheroidal and cast iron products, particularly cylinder heads and engine blocks, and has made investments in this direction. Our company is capable of producing spheroidal and cast iron products in single pieces ranging from 2.5 kg to 250 kg, and it plans to invest in the future for the production of vermicular gray cast iron and single pieces weighing up to 2 tons. Our company is committed to efficient operation, quality and diverse products, fast service, and a customer-oriented approach, aiming to carry this mission forward to future generations while growing and developing in a sustainable work environment.

We are geared towards plant, fixture and special machine construction - from the drawing part to the PLC-controlled robot system - and offer first-class service over the entire product life cycle. We also implement time-critical projects flexibly and reliably and contribute our extensive know-how to planning and implementation. From the first feasibility studies to wear part management for ongoing operations - everything from a single source. In our company, a competent and experienced team focuses on innovation, quality and continuity. We realize your ideas • Project planning and engineering • construction • Special mechanical engineering • Commissioning and training • Maintenance and repair work Our customers include international corporations as well as small and medium-sized companies from various industries such as the automotive and supplier industries, light bulb manufacturers, cosmetics and food industries and many more.

The Mill Point GmbH is a young company in metalworking. With the location in Arbon, we have an interesting supplier of workpieces of all kinds, especially for Eastern Switzerland. Through our years of work experience, we have specialized in the milling. Thanks to the high flexibility, we can finish and provide short-term orders on time. Our strengths lie in the Express-production. Today's market demands ever faster delivery of the same quality, and therein we are the best. Complicated or just simple items and series are no problem for us. Quality and fair prices are our priority !!! Translation by Google Translate

Technical sheet producer of punch / laser combination and bending parts (6axle) and welded assemblies and housing / apparatus.

The Zaeske Maschinenbau GmbH - successfully already in the second generation. Engineering mechanic and economist Thorben Zaeske leads the company in its second generation since 2008. We produce approximately 3,900 m² under roof. Currently we employ approximately 22 employees in the construction and manufacturing. Motivated employees, modern workplaces and machines are used to ensure a consistently high quality for our customers. Translation by Google Translate

Sturm Blechverarbeitung & Systeme GmbH Much more than just only sheet steel processing - high-tech sheet steel job order production We – the commited and competent team of the company Sturm Blechverarbeitung & Systeme – ensure guaranteed quality and precision for production and processing of laser cut and laser punched parts. We not only offer job order production of prototypes in large quantities, but are at the same time systems suppliers for punctual delivery of series components and complete component groups “just in time”. Modern job order production The concept of the Sturm job order production in our own high-tech machining centres easily makes it possible to use our technical know-how for all production steps and segments. Job order production = a worthwhile service for you Guarantees highest quality and optimum time management Our technology – use of most modern techniques 7 laser cutting installations, 1 laser cutting and punching installation with automatic production sequence, 8 CNC-mechanical press brakes, welding WIG, MIG, MAG, welding robots The product - simple sheet cutting as well as complex sheet devices max. dimension: 4.000 x 2.500 mm maximum thicknesses: steel 1 – 20 mm, stainless steel: 1 – 20 mm, aluminium: 1 – 12 mm The flexibility approx. 1.000 t steel and stainless steel sheets available ex stock for shortest possible delivery times, most efficient production, further processing possibilities

Modern production technologies joined with quality solutions. At Jerger, our philosophy is just that simple. We dedicate ourselves to the needs of our customers and the market. We are a recognized supplier of quality – a status we have achieved over the decades through our high degree of automation and our stringent quality control. Well-known and long-standing customers from various industries attest to the proven value of the Jerger philosophy. If you are working with steel joining technology, it is good to know Jerger. Jerger is an exceptional competitor in today's hotly contested market. The combination of automation and a constant drive to innovate have played a primary role in allowing us to process several thousand tons of steel per year. Our cutting edge company meets the challenges presented by the the price war that has now become common place in the industry with high flexibility and a standard of quality that has won loyal customers all over the world. Jerger KG exports quality joining technology throughout Europe, to the USA, Canada, South Africa, Australia and to Asia – all signs indicate continued growth in the future. processing techniques: milling, boring, punching, thread cutting, turning, etc., can be used on both sides of the workpiece without problem. Particularly in the area of possible cross processing techniques (multiple cross threads and/or cross holes) processed material: round material in the diameter range of 4.5 mm to 18 mm profile material such as a hexagon (SW8, SW10, SW13) or a square (4, 5, 6, 7 mm diameter) standard material machining steel (11 S Mn Pb30/37, 11 S Mn 30/37) brass stainless steel (1.4305)

Import / export of: Investment Casting Sand casting Forgings Turned parts of stainless steel, steel, bronze, copper Stampings Pressing and deep drawing components We are a medium sized import / export company and would like to offer and deliver your requirements for the following products, of course, with all the necessary inspection certificates according to PED 97/23/EC and / or AD2000 and automotive TS16949: - Made in the lost wax investment castings in stainless steel (eg 1.4308, 14408, 1.4362, 1.4462, 1.4581, 1.4571, 1.4404, 1.4852, 1.4749, 1.4517, etc.) or cast steel (eg 1.0619), heat-treated steels, tool steels, heat resistant steels and stainless steels Please note that a lot of turned and milled parts can be cheaper to produce investment casting! - Sand casting hand molded parts made of stainless steel, use weights between 10 kg and 3000 kg Investment Casting Materials see above - Stainless steel flanges according to DIN, EN, ANSI or your drawing - Punching pressing and deep drawing components from TS16949 certified manufacturing - Turning and milling parts from stainless steel, cast steel, copper - Forgings of stainless steel, seamless rolled rings, flanges of any kind Your advantage: We offer access to the most interesting Asian price levels without any risk. We are your contractor, you pay for the goods only after delivery and inspection, we ensure the quality permanently on the ground in Asia through its own QA inspectors.

Since 1992 we are specialized in fine blanking of precious and refractory metals, in scribing, cutting and drilling of ceramic substrates as well as marking and engraving by use of different laser installations. Our broad range of lasertypes and -technologies allows us to produce devices and semi-finished products according to your task. We process and use materials for toolmaking and mechanical engineering, the aerospace industry as well as automotive- and medical engineering. Customers of our company include manufacturers of moulds and tools, microelectronic devices, hybrid- and medical technology as well as engineering ceramics. Our manufacturing includes by default: scribing, drilling, cutting of thick- and thin film substrates fabrication of sputter masks, grind- and lap cages contour cutting in pipes engraving of copper- and graphite electrodes marking of labels, ceramics, plastics and much more Additional services are: single component measurements for geometry and surface repair service for older laser systems application-oriented purchase advisory service for new laser systems process-specific research

The Nowack Company was founded in 1932. In its early years, the firm specialised in the manufacture, processing and printing of natural corks. With the increasing use of plastic in the beverage sector in the 1950s, the company put its first injection moulding machines into operation. As markets continued to grow and become more demanding, the firm made parallel endeavours to widen its range of plastic articles and expand into other sectors. The move to the Lohne Industrial Park in 1972 proved to be decisive, as it offered the company the space that it required to continue to develop and grow. Various expansions in the production area throughout the 1980s and 90s allowed the company to move into further sectors, such as toolmaking, serigraphy and dabber printing. The year 2003 was marked by the construction of the new administration building and the addition of a further 1000 square metres of production floorspace. As you can see – Nowack is a firm that gets things done. And it intends to remain that way. We fully intend, now that the company is being run by a third generation of managers, to carry on doing everything within our power to have a positive influence on cooperation with our customers both old and new. Our sense of commitment is what makes us your reliable, quality-conscious, full-service provider in the field of plastics technology.

Specialised in Tube Processing and complete solutions of Precision Steel Tubes, Stainless Tubes and Aluminium Tubes.

f.u.n.k.e. PLASTICS GmbH is a strong partner for companies in industry and medium-sized businesses. With the know-how accumulated over decades, parts with the highest demands on quality and precision can be produced today. To this end, parts are manufactured for our customers, who come from the demanding fields of electronics production, aeronautical engineering and the medical and pharmaceutical industries, among others, using plastic injection moulding (1K and 2K), assembled into subassemblies, labelled and labelled, and in some cases tested using 100% automatic testing machines developed in-house. It is important to us that we support our customers in finding solutions. To do this, we take innovative approaches and incorporate new technologies and materials, such as recycled or biological plastics, into our processes. f.u.n.k.e. means: fabrication, utilities, network, know-how, engineering Services of f.u.n.k.e. PLASTICS at a glance: -single and multi-component injection moulding -tool/mould and prototype construction -manufacture of composite inserts -Ultrasonic welding -mirror welding -UV LED printing -Screen printing -tampon printing -hot stamping -other processes on request.

About us We, the Rex Industrie-Produkte Graf von Rex GmbH is a medium-sized company with about 75 employees. The company is based in Vellberg in the Hohenlohe region between Schwäbisch Hall, Crailsheim and Ellwangen. We have specialized in niche applications: Technical textiles for heat protection and insulation Insulation products of inorganic / organic fibrous raw materials for fire, heat, cold and sound insulation Fire protection products for building construction Friction and sliding materials (REX 2000) for industrial applications Moldings in vacuum forming Metalworking for mechanical engineering and special engineering Our products are customized and application specifically designed depending on the problem. They are characterized by excellent technical characteristics and consistently high quality. They are quick, handle clean and safe. Our main areas of application are mechanical engineering, shipbuilding, railway, power plants, military and industrial standard and special solutions. The introduced and practiced quality management system is certified according to DIN ISO 9001:2008. Furthermore, the quality management system for certain products, correspond to Module D (production quality assurance) of Directive 96/98/EC on marine equipment and is regularly reviewed and certified by the See-BG.

The Evangelische Stadtmission Halle Einliederungshilfe gGmbH operates several workshops for disabled people in Halle (Saale) and in the Saalekreis. One of them specialized in the areas of CNC machining and electrical assembly. Clients can have 50% of the work performed by workshops offset against their compensation levy. With an order, you support the participation of people with disabilities in working life.

CZIOTEC - "Precision for better Quality" The CZIOTEC GmbH is a company with more than 100 employees. We are a recognized training company with about 20 training places. In diverse occupational groups we enable a successful entry into the professional life. We have been certified since 1997 according to DIN ISO 9001 and since 2012 welding to EN 1090-2. Our strength is the high level of vertical integration. We accompany the customer from the initial idea for a product to series production and beyond.

The PEUS Testing GmbH, based in Gaggenau (Northern Black Forest), is a modern and professional test center for the automotive industry. The second pillar of the company is the field of tool. We offer • Tool • jigs and fixtures • Series production • Individual Manufacturing We guarantee a flexible and individually appropriate customized production in the field of tool making. The CNC machine allows low-cost and continuous production: We manufacture your items or even a series production. Machine fleet: • Bridgeport VMC 1000/30 Heidenhain 426 + dividing head 4 +5 axis traverse X1000 Y500 Z500 • Super quick-turn 18 Mark ll - CNC Lathe • Lathe-Conventional • Wig-MAC Mig welding • CAM software: CondaCam