Our core competence is the production of castings and extrusions made of aluminum with high demands on quality and precision. Cutting-edge technology, designed according to the latest equipment and a motivated team of experienced specialists guarantee an effective and efficient processing of orders. We are certified to ISO 9001, environmental management standard ISO 14001 and automotive standard ISO / TS 16949.

Supplier of metallic and non metallic turned and milled parts as well as preassembled an final assembled assemblies.

We carry large parts machining with up to 15t. With the help of our technically gifted and qualified staff, we work very efficiently. Our company is a modern, specialized family, combines tradition with modern computer technology. Thus we are an efficient, reliable and affordable partner for machine and plant engineering.

Precision forging of non-ferrous metals

The AZ Factory is your source for waterjet cutting, CNC turning, CNC milling, manufacturing of welded assemblies and assembly. We supply from prototypes to series from a single source and provide maximum availability and flexibility with high precision and punctuality!

We are a metal company with 45 employees. We manufacture and install gates, doors and facades made of materials as steel, aluminum and stainless steel. Our Prdouktiosnprogramm: Steel doors and gates with optional double glazed opening, ventilation blinds, side panels and top panels Fire and smoke protection doors rotary RS, T30, T90 with optional side panels and top panels. As a multi-function door with a request to fire, smoke and intrusion protection (up wk4). Soundproofing 1-leaf to 45dB, 2-leaf to 42dB, sheet thickness 1.5 mm. Door (T90) with request to increased air tightness tested to 1200 Pa. Door panels for existing frames and options for installing a new frame without dismantling the old frame. Tubular frame doors and glazing RS, T30, T90 aluminum, steel or stainless steel Fire and smoke protection sliding gates RS, T30, T90, T90 telescope Top flap T90 for horizontal installation with opening aid Steel sliding gates for industrial, commercial and hospital sector (OP-doors) optionally with electric.Drive light cutout, radiation protection etc. Folding sliding (thermally separated or not separated) for your production halls, 3-7-bladed Ventilation blinds for closing / opening or fixed, with fly or bird screen CNC sheet metal hole, burled panels, flashings, including coating CNC milling, drilling, flow drilling (for threads in thin-walled tubular sections), cut threads until XYZ 6500 x 240 x 240 mm, machining of aluminum, steel and stainless steel (please send drawings)

Special emphasis of our production forms mass production and production items for the general connection technique, spacer pin of SW4 - for SW13 as well as parts ready to be installed for furniture fittings and electrotechnical devices. Hofsäß use modern high-performance machines with horizontal and vertical operation to produce highest quality parts from coiled wire stock.

Workshop for the Disabled of Special Education Centre Irchenrieth eV For over 30 years in charge of the special education center for disabled eV people with special needs. At our institution, therefore, also includes its own workshop for the handicapped (WfB). This can compete with the private sector is well - both technical and human resources. We are equipped with advanced computer-controlled machines and employ both in the care of the disabled employees / inside as well as the planning and organization of production exclusively professionals. Great is the bandwidth of our production. We take orders from the fields of metal, plastic, electric and wood, but are prepared for work in fixture and mold construction. The WfB is therefore quite an attractive and efficient business partner. We offer quality and service!

Business We, production and service companies EMR Industrial Machining GmbH (in short: EMR IZ), are first-class system supplier to the metal industry in the field of precision engineering. Since its founding in 2000, we as a young company providing customized, sophisticated metal component any types that exactly match the requirements and wishes of our customers in the form, size and material. In addition to our core competence as a supplier of turning and milling technology, we have specialized in the field of hardware for HPLC analysis technology to provide our customers in this area, a comprehensive range of products. We are equipped with modern CNC turning and milling centers, which are available for your requirements. We currently employ 25 people and are constantly growing. Our team consists of highly qualified, motivated and experienced professionals in the field of machining. Our clientele include companies and organizations that are located around the world.Industries and sectors for which we have already made: electric industry, automotive industry, pharmaceutical industry, medical technology, precision optics and research institutes. Services We like to contribute to the mating connector. That's why we offer you the highest precision in individual turning and milling parts, which are tailored to your needs and desires. We have already produced more than 700 different parts and are always adding new ones. Our services include, depending on the needs of both single and serial production. This means for you: You need not search for a matching part, the part you want is made for you to fit in the desired quantities. Our special service: We advise and support you in the production of a prototype and assume all incidental activities that relate to the production of the item. If required, we can fit even your items together. Approach a prototype design: The interested party gives us a template in the form of a drawing or a sample piece, and we produce the desired amount.If a template does not exist, we support you, that looks like this: you give us a rough draft or description of the object. We simulate the object in a tailored specially for engineers software program. You give us your parallel change requests known. After that, the object goes into production. After it comes to the production test phase. During this phase, further changes can be made. This process continues until the object corresponds to your precious ideas. You see: We rotates and milled everything to your satisfaction!

The company Herbert Weiss GmbH is a medium-sized family business which has existed since now almost 50 years. Our power is in mass production of turned parts. Our current scope lies in the furniture, electrical, architectural hardware, window and automotive industry. We manufacture exclusively from the coil with rotary machines. This production brings with it that we can not customize any dimension; dimensions, but fit into our range and are for us in the realm of possibility, are thus produced for our customers in high cost-effectiveness. The production takes place in a modern according to the state industrial hall covering an area of over 3,000 m2. This includes, for example, a fully automatic parts and Spänförderer, fully automatic parts-oil removal and chip disposal plant. In our production, 35 skilled workers working in the four-layer system. The current production site in the Ring Road 23 was built in 1995 and expanded to its present size in 1999. In the current production is measured every 30 minutes regularly drawing justice and documented. The documentary takes place by means of the Software and subject to continuous evaluation. For the production and timely delivery, we are always bemht to do everything humanly possible, because we are seeking a long-term business partnership with our customers. We enjoy the trust of many customers, our products worldwide without input control to their customers to provide direct (Ask for our references). We are DIN EN ISO 9001:2008 certified.

SP CNC Manufacturing Technology GmbH presents itself as a young and innovative company in machining. Milling is our specialty! From prototype to series - because the number one inspires us as well as the number 1000th From raw material sourcing through to the surface treatment - We provide you with pre-finished parts. Highly motivated and well-trained staff and modern machinery are of perfect quality at the agreed date and the best price. Together with you to discuss your needs and the best possible target defined as standard solutions. We see it since our company was founded in 2005 as a challenge to achieve our ultimate goal through continuous improvement of our manufacturing methods and stringent quality control measures: The satisfaction of our customers! Technology The milling is done on the latest Hurco and FANUC machining centers with the latest control technology. Up to four controlled axes may be used. The maximum processing paths of the milling centers are located at: X = 760mm Y = 510mm Z = 610mm The maximum workpiece can be up to 500 kg. It will reach up to 24,000 rev / min speeds. Current machines backlog in processing centers: * Hurco VMX 30 with control ULTIMAX 4, Year 2005 * Hurco VMX 24 with control ULTIMAX 4, Year 2006 * Hurco VMX 24t with control ULTIMAX 4, Year 2007 * FANUC 21i ROBODRILL FL, with FANUC 31iA, year 2008 * In the area of measurement technology, we rely on MITUTOYO * The material blank is carried out on a band saw FORTE Furthermore, we can offer you the assembly of complete assemblies. If our manufacturing facilities to be sufficient not even know it was in turning area, erosion or other production methods, so we can count on reliable partners, to offer you a complete package.

General wage, for mechanical engineering. High-precision machined parts for the very intensive sector machine tools, general engineering, power transmission, special purpose machinery, heavy engineering and plant construction. CNC turning, CNC milling, grinding, drilling, grinding inside-outside, surface grinding Gewindebohren-/Schleifen, weldments, Jig boring to 8 meters in length. In summary: A Universal operation with an extremely good price-performance ratio. Over 200 satisfied customers in Germany including 10 major corporations 3 D - measuring machine available. See our website: www.gross-gabriel.de

We are a medium sized company and our core business is the production of special machinery parts for the industry, both in mass and individual production. We can look back on more than 50 years of experience and are your reliable partner for the development and procurement to manufacturing to logistics. In addition, we also use a high degree of flexibility in our production processes, so that we can always realize aktuelleste requirements and wishes of our customers in the shortest time. What we can do for you: special machine parts - assemblies - Components - mass production - Custom manufacturing - Procurement - Delivery - Logistics - Machine Tools - Machine Parts - Mechanical Engineering

Our company was founded in February 1997. In our 10 employees are employed, which are primarily for highly qualified toolmaker and welder trades with many years of professional experience. Our highly qualified personnel, we are able to flexibly implement your requirements. By our own tool, the conditions for a wide range of production according to individual customer requirements are met. Our products are not only in Germany, but including in the CIS countries, China, Austria, the Netherlands and the Arab states in use. On our website you will find an assortment of our extensive range of services. Please do not hesitate if you have any questions about individual needs. Our proven specialized personnel, we are able to flexibly implement your requirements.

We are specialised in springs, wire parts, and metal assemblies.

Overview We manufacture: Custom Parts: Stamping parts, stampings, wire bending parts, connectors. Special springs, spring clips, flat springs, contact springs, washers, sleeves, spring clips, retaining clips, contact sheets, wire form springs, wire axes, cut wire. . . We process: All types of steel, in particular spring steel and stainless steel 1.4301 and 1.4310, all non-ferrous metals and alloys (copper, brass, phosphor bronze, nickel silver, beryllium, aluminum), also pre-coated material. Ribbon thickness of 0.05 mm to a maximum. 4.00 mm Wire diameter of 0.30 mm up to max. 5.00 mm. We supply: Automotive industry, electrical and electronic industry, engineering, telecommunications and optical equipment, medical equipment, electric home appliances, consumer electronics, toys industry, sporting goods manufacturers. . . We produce on stamping machines (Bruderer + Haulick, 25 tons to 125 tons), punching and bending machines (Bihler, ORM GRM 0 to 80) and other special purpose machines. For more information: 55 employees own tool convenient location on the outskirts of Nuremberg, next to the airport clear production in walk-in hall Quality Management System certified to ISO 9001:2000 and VDA 6.1

Technical plastic parts & mold making