Sheet metal parts Plastics Processing

We are a solid, medium-sized automatic lathe and provide our customers since 1953 precision turned parts using the best quality. Over the decades, our Automatendreherei developed into an innovative and leading manufacturer of complex machined parts which we manufacture according to drawings for our clients. Small and medium series, especially brass and aluminum turned parts are our strength. Regarding the result of our processing machining parts we offer beyond galvanizing, nickel, hardening, bronzing, chrome plating, anodizing, electropolishing and grinding. Companies in the medical, electronics, aerospace, automotive - and supply industry, we can count on our long-standing customers.

SHZ manufactures and markets lifting equipment, like lifting and round slings as well as load securings, like tie downs, lashing straps and lashing chains for a worldwide clientele. We are located in Großröhrsdorf/ Saxony (Germany). Our lashing Products are certified with GS-Sign. If you have any further questions do not hesitate to contact us.

Machinery: - Sandblasting company Rumpp (connection power 135kW) - Powder coating unit Fa Rippert - Workpiece Size: Length: 3000mm Width: 1.200mm Height: 2.000mm Weight per traverse: 300 KG Process Description: 1 Auf-/Abgabe The workpieces are attached manually to the spreader beam handling equipment. To the quarrels of eg heavy workpieces, the conveyor system through a unguided Hub-/Senkstation be lowered at this position to the hanging or removal to facilitate. 2 Strahanlage The beam system is operated with 8 motors (11KW per engine). Drive the motors each an impeller, which then 3,000 u / min rotate. Is irradiated with a Steel cast grain size of 0.60 to 1.00 mm. 3 Pretreatment + Haftwasser dryer (3min handling time.) Degreasing, phosphating FE: Step 1 Step 2: Rinse (treatment time 1min) Step 3: Rinse with deionized water (treatment time 1min) Step 4: Dry Detention water dryer (160 ° C) 4 Automatic powder booth + Pulvereinbrennofen Step 1: powders of the parts by 4 guns (2 right, 2 left the cabin) alternately go up and down. Step 2: burn the powder in Pulvereinbrennofen at 220 ° C

ESA Electric was established in 1973 in Duzce, Turkey. Our major work until 1988 was to design and application of electrical installations for industrial facilities. In 1988, ESA started to supply parts for one of the major appliance manufacturers, Arcelik, in Turkey. In 1990, the company became Incorporate. In 2000, ESA’s mold production department started to design & manufacture moldings for many manufacturers and for itself. In 2004, the Company purchased Collector Motor production line from Bulgaria which produces 100-2000 W AC & DC collector motors. Motor Production line is ready for production as of today. Esa Electric is located in Bolu Industrial Site, with a 3000 m2 covered area. Our facility has a 8300 m2 lot in total.

PRECISION Responsibility and the joy of precision. We are aware of the factors that lead under any circumstance for optimum quality. The same quality standard applies to us for all services in the field of logistics. In order to ensure the highest quality controls are carried out regularly. The control processes are permanently performed using specially designed instruments. (Roughness / 3D microscope) As a result of the interaction of our internal processes, the customer products and services that are tailored to its needs receives. TECHNOLOGY Smallest and Largest in varying complexities. Our expert staff is able to effectively and efficiently to solve with the existing infrastructure budding functions in the interest of the customer. An orderly and transparent information and data flow to production ensures the speedy implementation of the orders. CNC milling X max. 1000mm Y max. 500mm 6 machining centers with up to 4 axes. CNC turning Ø 3 to 280mm L = max. 750mm 5 CNC lathes 4 Double-spindle lathes with up to 6 axes. LOGISTIC We are with our logistics in the position to call the customer already in orders binding delivery. Manufacturing, planning, management and delivery - vertices that we know to master. Procurement of standard parts and subsequent bench assembly of mechanical assemblies. Full implementation of all logistical tasks related to your orders. Storage of customer references Kanban JIT deliveries. PRODUCTS Regardless of the quantity of an order, each part is made made by us in accordance with the appropriate specifications, tested and declared fit for each. The constancy of the high manufacturing quality ensures, among other things, for the tremendous customer satisfaction. • High precision stainless steel housing. • Complex multi-sided machining on double-spindle lathe. • complex, labile aluminum part with surface treatment and Laserbeschhriftung

Highest quality ensures your value Since 1945 we have been producing gears and gear of all kinds of national and international enterprises. First, now working in Rheinfelden and then in Möhlin already three generations, firmly rooted in the economic area Frick Valley. From a small mechanical workshop, the family business has developed into a modern, ISO-certified production operation. Our strengths clearly lie in flexible and creative solutions. We support and advise our clients from idea through production and even after the delivery for you. We are proud to produce these gears and transmissions, eg for cable railways, hydropower stations, shredders also for vintage vehicles and even the cotton candy production. Our knowledge, experience, proven and innovative methods guarantee your success. No job is too small and rarely a gear too high. Trust and communication are the basis for successful cooperation.We are your specialists. Working with us means: • Everything from one source • Professional, qualified team • Customer-specific production and small series • Appointment club beard delivery • Customer management with guaranteed service performance Do you have questions? Talk to us, we always find a common solution. Production program Spur and helical gears planed, abwälzgefräst • Ømax. 3000mm, Modul0.5-50 Width 440 polished • Ømax. 1000mm, width 480 Modul0.6-24 Internal Gears • Ømax. 2800mm, Modul0.5-16 Width 350 Bevel gears straight teeth • Ømax. 900mm, module 0.5-20 spiral-toothed (Gleason) • i = 1:1 Ømax. 650 • i = 1:10 Ømax. 850 module 0.5-18 Hypoid gears (Gleason) • Same dimensions as Spiralkegelkräder • Max. 80mm offset Worms, worm gears, racks, sprockets, helical gearing and clearance work on request.

Strong all-around - SLM 360º We develop and manufacture complex aluminium die-cast solutions for the automobile industry and its system suppliers. As a Group, our strengths lie in the development of tools, products and processes as well as in our high level of flexibility and ability to take action quickly to implement solutions for our customers. We want to expand our business activities to increase flexibility, transformation time and cost-effectiveness in the provision of light metal components for our customers. Therefore, we are expanding our capacity for order-related assembling. From company to group The original and main activity of the owner-run Group is the manufacturing of aluminium die-cast products for the automotive and component supply industry. Created in 1989, the aluminium die-casting foundry originally made unfinished parts for the European automotive industry. Today as a Group, we are a competent partner to our worldwide customers for the entire process, from product development to the delivery of complex, ready-to-install light metal components. The right approach Our aim is to obtain full customer satisfaction and to build a business relationship designed to develop into a long-term partnership. It therefore goes without saying that we deliver products of the desired quality, in the agreed amount and at the required date. Our references are proof of the level of confidence we have established over the past years with our customers. The principle of error prevention always comes first in regards to quality measures and our quality objective is “zero defects”. Our numerous certifications are proof of our commitment.

ČZ a.s. Division Al Foundry is a part of the ČZ a.s. holding, which was founded in 1914 and has now 5 different divisions (Al Foundry, Iron Foundry, Tool Shop, Turbo, Auto) and three LLCs - ČZ Chains, ČZ Machine Plant, ČZ Gastro). Due to the long-term tradition, the Al foundry production was subsequently serving for different sectors of the automotive industry, as an example the production of castings for engine parts or its components. At the present time, the Division Al Foundry has 200 highly qualified employees with a long-term work practice using 6000 m2 of production area. Al Foundry is a holder of the quality system according to the ISO/ TS 16949 and 14001:2004, further on is certified within the Secure Company system. Supported alloys: EN AC 46 000 - DIN 226 EN AC 47 100 - DIN 231 Casting are being produced in a range of 0,1 - 8 kg Die-casting machines: 1 x CLH 160 t 2 x CLH 250 t 4 x CLH 400 t 1 x DAK 500 S FRECH 6 x CLH 630 t – 1x fully automatic incl. trimming, 1x half-automatic (spray robot) 1 x DAK 880 FRECH – fully automatic including trimming 1 x CLOO 1600 t – fully automatic including trimming Die-casting machines are made by: Frech, Hydac, DEL, Snina Trimming presses: Range 10t – 30 t SOL 10, SOL 26, CNOS 16, LHS 15B, ČZ 10 Capacity possibilities: CLOO 1600 - 533 t/yr Frech DAK 880 - 260 t/yr CLH 630 - 1482 t/yr Frech DAK 500 - 282 t/yr CLH 400 - 947 t/yr CLH 250 - 212 t/yr CLH 160 - 40 t/yr Melting house equipment: Gas-melting furnace STRIKO – two – chamber, volume 2.000kg, Electric resistance furnace ELSKLO – output 180kg/hr, volume 600kg, Low-frequency resistance furnace Siemens – output 250kg/hr, volume 1.000kg, Degassing equipment ammonia-based. Finishing technology: Basic machining: 2 x screw-cutting 2 x drill presses Finishing drum washer tumbling – tumblingequipment Rössler blasting – suspension blast machine SPH Disa and a drum blast machine PTB Disa

Company General Mechanical Precision Working in small and medium series, so much for the food (wear machine production parts, machining unit or series of complex parts used in the manufacture of machinery for the food). Our responsiveness and flexibility allows us to respond promptly to any request and may be an important asset to solve some untimely stop producing factors. Our means of production are: - 1 4-axis machining center high capacity 3000 * 2100 * 760 - 2 4 axis machining centers in 1350 * 630 * 700 - 2 digital controlled lathes cap.DIAM.500 * 1000 - 2 digital controlled lathes cap.DIAM.150 * 250 - 1 round capacity conventional diameter 350 * 600 and 4000 * diam.600 - 2 grinders - 1 cylindrical grinding - 2 stroke 400 mortisers

We deliver since 1982 industrial custommers in Europe. We are specialists in small and middle series for the following production processes: - Milling - Drilling - Grinding - Honing Last but not least are we specialists in producing guide shafts up to 6meters in length.

We are your faithful and reliable schedule CNC - milling We offer high quality work in the field of CNC as a contract manufacturer - Milling with bed milling machines of the brand SORALUCE and Bohrwerksbereich with the machines of brand Wotan. This is the slogan: "Our precision to your advantage.", At the same time our company philosophy. With expertise, quality, reliability, flexibility and punctuality, we are a reliable partner around the CNC - milling and boring machine. This is made possible by a dedicated staff, and have modern CNC machines. Thanks to our experience in CNC - milling, we can also create objects with complicated 3D contours. In addition, our 5-axis CNC offer - Milling the possibility of positioning the cutter at any angle. This is a guarantee for the production of more complex objects. Also regarding the speed range and driving performance, our investments do not have to hide. On our site you can find detailed information on any machine of CNC - machining.These include paths, Number of tool stations and information about the maximum workpiece height etc. Try us and see how they may be your needs always, we find an ideal and perfect solution to your parts cost via CNC - to produce milling. We welcome your inquiries in the field of CNC - and boring mill. Even short-term contracts for the CNC - milling we can. So do not hesitate to send us a request. Save time with the production of your parts via CNC - milling time and costs.

Our team has over 30 years of experience in producing temperature sensors and in developing the appropriate measurement and controls equipment for many different branches of industry. The portfolio of the company includes thermocouples, resistance thermometers, NTC/PTC-elements, melt pressure sensors, level controls, control instruments and control screens and solid state relays (SSR) of the brand celduc. On request we develop custom-fit sensors and controls. In May 2008 the team renewed the quality management certificate ISO 9001. The company also holds an number of certificates to supply certain industries like shipyards. We would be more than happy to make you an offer.

About us Our goal is to produce gears and gear reasonably priced and in a short time. We manufacture: * Involute gears from module 0.3 to module 10 in different pressure angles from quality 3 * Special teeth like serrations, flat belt pulleys * Special gear In all batches. History Founded in 1946 in Stuttgart-Feuerbach. With 5 employees objects were made for everyday use in the postwar period. Article: Scourer, pencil-sharpening machines, drilling machines and rotating lens Dressing tools. Since the production of rotary tools, or machine crystallized out as a focal point, the founders chose the company name: ROTAX Beginning of the 50's years of production focus has shifted to manufacturing of gears of various kinds Beginning of 1956 the company increased its product range with the production of special gear for production lines. 1977 Moving to Hemmingen In 1977 after the creation of a new factory building with a larger production area, the range could be extended. Own transmissions were successfully established on the German market. The New Development of a backlash-free measuring gear is to be a priority and sought-after products. In 2003, the Rotax is characterized by the production of high quality precision gears. Well-known companies from the automotive, mechanical engineering, medicine, drive technology are among our customer base.

KAISER GmbH surface technology - we have over 30 years of know-how and experience in the field of contract coating. We are your acknowledged specialist in corrosion protection and realize surface coatings of various types. Of the zinc flake coating over the KTL coating to powder coating, we offer a wide range of processes for your metal parts. Everything from a single source is our goal. We offer you the surface coating around with wide range of services such as assembly, inspection and packaging to complement your requirements with. Please contact us if you are looking for a strategic partner that provides you with quality, flexibility, reliability and innovation in the field of coatings.

The chub electric heat GmbH is your competent partner for development, production and sales of electrical heating elements made of copper and stainless steel various designs for energy conversion and solar technology. As a service provider for electrical heat generation, we are an established and reliable partner for your technical applications. Our product engineers will be fully responsible, creative and solution-oriented. Our in-house tool enables us to quickly and flexibly to your wishes. The production is continuously adapted to the new challenges to an efficient process design. The staff are highly motivated and well trained. Thus we are able to meet the ever increasing market requirements and to realize the customers their specific solutions on time and to quality standards. In addition to active consulting activities of our own sales department you are knowledgeable and powerful distribution partners throughout Europe, andalia in Poland, Austria, the Netherlands and Hungary, are available. Take us at our word! Give us a try! Our Products: Liquid heating: round tube radiators of copper (hot water tank, auxiliary heaters for boilers, boiling water heaters, water heater), round tubular heating element (flange heater, heater for steam generators and temperature control, immersion heaters, Indirect heating of stainless steel containers), flat tube radiator, ceramic column radiators) Air warming: fin tube heaters, heater Tool heating: round tube radiators cast in aluminum, cast iron or bronze alloy, surface Heaters for vacuum coating systems, high-performance cartridges to tool cartridge heaters, Mikanitheizungen, ring heaters Radiation heating quartz tube heater, infrared heaters Special barbecue or fireplaces,

Dear friends, Let me introduce our copmany BKB Metal. BKB Metal is an independent company belonging to the group of private owners. To The main aim belong trading and mediating activities in machine and engineering industries. The company is located in Namestovo town, Northern Slovakia, near frontier with Poland. We can offer the mediation of engineering products for various factories according to technology of metal making in the range of all metal and engineering industries. Our precision machining company offers: - classical Turning and Milling - surface finish, nitriding, hardening, chromating, zinc coating , powder coating, - lasser cutting, punching, bending, welding Mig – Mag und Tig , casting - machining on CNC maschine , vertical und horizontal center, milling and turning. Besides that , we have extensive experience in maschining the materials as stated below: - Carbon Steel ( AISI 1018 , 1020 , 1045 , Mild Steel) - Stainless Steel (AISI 303, 304, 316, 316 L ) - Aluminium - Tool Steel We assure the shortest time of the answer to your reguest and the best quality price rapport. Our specialists are the quarants of the high quality delivered products. In case of your interest please, contact us. BKB Metal. s.r.o. Komenského 484/7 029 01 Námestovo Slovakia e-mail:beres@bkbmetal.eu tel.num: 00421911607353

High-quality and extensive range of products in sheet metal forming and sheet metal work form the solid foundation of August BERTRAMS GMBH for many decades. Due to the personnel and equipment performance monthly 1200 tons of material are currently being processed in our sheet metal processing centers in Cologne and the Thuringian Berka. Through the use of CNC punching machines, 3-D lasers, CNC shearing, CNC press brakes, MIG-MAG, spot, bolts and resistance welding equipment single parts are manufactured to the finished part. Order processing, production planning and construction are performed with PPS, CAD and CAM. All areas are subject to the quality management system.